Similar to This
View all stencils →About this stencil
A wide-eyed little ghost with curled hands and a wavy hem floats in front of a big round glow, its startled O-shaped mouth mid-boo. The circular background is cut through around the ghost, so the figure stays as connected rind while light floods the disc behind it. Those slim connector bridges at the hands and hem are the whole design; cut the large background sections first and save every bridge for careful final passes. This design is rated Advanced and takes most carvers around 150 minutes from trace to glow. Multi-layer cuts with skin-peel shading. Plan your cuts first.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a advanced carve like this you'll want a linoleum cutter set, x-acto knife, peel tool, and pin transfer wheel. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlyGhost with Three Uneven Points
A single billowy ghost with two raised arms and a wavy hem ending in three uneven points, carved as one big glowing cutout. The entire ghost silhouette is pierced through, so candlelight fills the friendly specter from arms to tail. This easy one-piece design suits squat pumpkins with plenty of front surface; cut the smooth outer curves first and finish with the scalloped bottom points, which are the only fiddly bits.
IntermediateWaving Wispy Ghost
A friendly ghost with trailing wisps waves from the pumpkin, its oval eyes and mouth left as darker raised skin against the pale shaved body. There are no pierced openings; you peel the skin away inside the ghost outline so the flesh glows gently when lit. Shave in smooth, overlapping strokes and stop at the eye and mouth outlines so those features stay dark and crisp.
Beginner-friendlyWaving Ghost with Four Lobes
A friendly little ghost lifts one stubby arm in a wave, its four-lobed hem trailing below round eyes and a happy open mouth. The whole figure is shaved shading: you remove skin inside the body so it glows softly, then leave the eyes and mouth as raised uncarved pumpkin. Even, shallow shaving is all it takes, which makes this a forgiving introduction to etching.
Beginner-friendlyCauldron and Three Bubbles
A round-bellied witch's cauldron with side handles and little legs, carved as one big glowing cutout, while three round bubble holes rise above the rim like escaping brew. Everything cuts fully through, so the pot blazes and the bubbles float as bright dots. One of the easiest spooky designs going; punch the three bubbles first, then saw the cauldron body in sections, leaving the handle nubs attached to the main opening.
AdvancedGhost with BOO Balloon Pumpkin Stencil
A small ghost holds a round balloon with the word BOO written on it in this hard ghost pumpkin stencil, the balloon rendered as a thin open circle with letter cutouts and the ghost below it as a rounded blob with oval eyes and a wavy hemline. Both figures are outlined by thin curved lines that remain solid orange, so when lit the design shows glowing ribbons of light tracing the balloon string, the ghost body, and the BOO lettering. The string connecting the balloon to the ghost's hand is a single narrow line that must be cut last to keep the two halves of the stencil from shifting apart mid-carve.
Beginner-friendlySad Ghost Pumpkin Stencil
Two drooping teardrop eyes, a tiny pierced heart for a nose, and a jagged zigzag mouth give this ghost jack-o-lantern pumpkin stencil its mournful expression. All five cut pieces are bold and generously sized, making them straightforward to carve cleanly. The small heart is the trickiest element; cut its two lobes with short inward strokes meeting at the bottom point so the tip stays crisp rather than tearing.