Similar to This
View all stencils →About this stencil
A friendly ghost with trailing wisps waves from the pumpkin, its oval eyes and mouth left as darker raised skin against the pale shaved body. There are no pierced openings; you peel the skin away inside the ghost outline so the flesh glows gently when lit. Shave in smooth, overlapping strokes and stop at the eye and mouth outlines so those features stay dark and crisp. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedCurled-Hand Ghost & Round Glow
A wide-eyed little ghost with curled hands and a wavy hem floats in front of a big round glow, its startled O-shaped mouth mid-boo. The circular background is cut through around the ghost, so the figure stays as connected rind while light floods the disc behind it. Those slim connector bridges at the hands and hem are the whole design; cut the large background sections first and save every bridge for careful final passes.
AdvancedGhost with BOO Balloon Pumpkin Stencil
A small ghost holds a round balloon with the word BOO written on it in this hard ghost pumpkin stencil, the balloon rendered as a thin open circle with letter cutouts and the ghost below it as a rounded blob with oval eyes and a wavy hemline. Both figures are outlined by thin curved lines that remain solid orange, so when lit the design shows glowing ribbons of light tracing the balloon string, the ghost body, and the BOO lettering. The string connecting the balloon to the ghost's hand is a single narrow line that must be cut last to keep the two halves of the stencil from shifting apart mid-carve.
Beginner-friendlySad Ghost Pumpkin Stencil
Two drooping teardrop eyes, a tiny pierced heart for a nose, and a jagged zigzag mouth give this ghost jack-o-lantern pumpkin stencil its mournful expression. All five cut pieces are bold and generously sized, making them straightforward to carve cleanly. The small heart is the trickiest element; cut its two lobes with short inward strokes meeting at the bottom point so the tip stays crisp rather than tearing.
Beginner-friendlyFloating Ghost Pumpkin Stencil
A small ghost floats at the center of a large circular negative-space opening in this easy ghost pumpkin stencil. The ghost has two spiral-curl eyes, an oval open mouth, and small wavy arms extending to each side, all kept solid as islands within the big cut-through circle. The circular border, the ghost's body and details, and the wispy lower tail all remain as intact pumpkin skin while the surrounding area is carved away. Cut the two curl-eye shapes and small arm details before removing the large circular background so the ghost's delicate features stay supported.
AdvancedFriendly Ghost Pumpkin Stencil
A cheerful, cartoonish ghost with a round pudgy body, wide grinning face with crinkled eyes and rosy cheeks, and wavy trailing edges floats center-stage in this ghost pumpkin stencil. The ghost's body is a network of flowing curved solid lines, the outline, the cheek arcs, the eye detail curls, set against cut-through areas that form the glow around the figure. Wispy curl accents appear on both sides. The crinkle details inside the eyes and the small cheek curves are the narrowest solid bridges; cut those first before removing any of the surrounding open areas.
Beginner-friendlyDouble Ghost Pumpkin Stencil
Two matching ghost faces sit side by side on the same stencil, each with a rounded dome head, two large round eye holes with small bite-shaped cutouts at their edges, a dripping blob mouth, and a single elongated teardrop hanging below. Every element is cut through: the paired layout means the lit pumpkin shows two ghostly visages at once, each dripping in unison. Cut all the eye circles before the mouth drips, as the drip shapes point downward and a firm uncut lower wall keeps them from buckling while you work.