Similar to This
View all stencils →About this stencil
A goofy lopsided face with one big round eye and one square eye, a small triangle nose, and a huge open smile interrupted by two buck teeth hanging from the upper lip. All shapes are cut fully through, and the mismatched eyes do all the comedic work. An easy, forgiving carve for kids and beginners; cut the smile last and leave the two tooth tabs of rind attached so they dangle into the glow. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlyCrescent Wink and Two Teeth
A playful winking face with one big round open eye, one crescent-shaped winking eye, and a broad open smile showing two square teeth. All the features are simple pierced openings with plenty of solid pumpkin between them, so the face is sturdy and beginner friendly. For this easy carve, cut the large smile first while the wall is strongest, then finish with the crescent wink, angling your blade slightly outward for a clean curve.
IntermediateRound-Eyed Clown With Brows
A cheerful clown face with raised curving brows, big round eyes, a round button nose, small dot cheeks, and a huge sweeping smile. Every feature is a straightforward cut-through opening, and the little cheek dots on each side add extra sparkle at night. At medium difficulty the challenge is spacing: transfer the stencil carefully so the brows sit clear of the eyes, then drill the small dots with a pumpkin drill or apple corer for perfect circles.
Beginner-friendlyCat With Square Twin Teeth
A cheerful cat face built from simple pierced shapes: two wide eyes topped by pointed ear notches, a triangle nose, three whisker slits fanning from each cheek, and a big smiling mouth with two square teeth hanging from the top lip. Every element is cut through for maximum glow. An easy pattern overall; just cut the skinny whisker slits with a single steady push each so they stay clean and straight.
Beginner-friendlyTwo Lower Teeth Smile
This cheerful jack-o'-lantern face pairs two big round eyes with a wide open grin interrupted by a pair of goofy buck teeth. The eyes and mouth are cut all the way through, while the two square teeth are left attached to the top lip. Since it is an easy carve, just take care around those teeth: cut the mouth opening around them and leave each tooth anchored so it does not snap off.
IntermediateLopsided Zigzag Grin
A cheerfully lopsided jack-o'-lantern face with one big round eye, one slanted triangle eye, and a wide zigzag grin stretching across the pumpkin. All three features are pierced fully through so candlelight pours out, while the surrounding skin stays untouched. The zigzag mouth is the trickiest part at this medium level, so cut each tooth point in two short strokes that meet at the tip instead of dragging one long sawing pass.
Beginner-friendlyGoofy Buck-Toothed Smile
A cheerful jack-o'-lantern face built from two tall arched crescent eyes and a huge open grin anchored by a pair of oversized buck teeth. Every shape is cut all the way through, so the eyes and smile glow brightly while the goofy overbite stays as solid pumpkin. This is an easy first carve; saw slowly around each tooth from the mouth opening inward so the narrow tooth tabs never snap.