Similar to This
View all stencils →About this stencil
One round eye and one sideways triangle eye give this pumpkin its delightfully goofy, mid-wink expression, finished with a huge upswept smile and two square teeth hanging from the upper lip. All shapes cut straight through for a bright, cartoonish glow. It is an easy crowd-pleaser; cut around each square tooth carefully, since they stay attached to the top of the mouth, and round off the smile's corners for extra charm. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 35-55 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the mismatched eyes. Cut both regions marked 1. Preserve the leaning round eye on the left and tall triangular eye on the right. Keep their unequal sizes and the broad shell bridge between them.
- Keep the two square teeth. Cut region 2 around two upper square teeth. Preserve their full attachments and the higher right tooth. Follow the strongly rising right mouth corner and rounded base, supporting the plug during the final cut.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedArched Pupils and Twelve Rays
This pumpkin is absolutely thrilled to see you: arched eyes with hanging pupil tabs sit above a giant grin packed with separated square teeth, while short rays burst from each cheek like cartoon sparkle lines. All the shapes cut through, and the many thin bridges between teeth and rays are why it rates hard. Cut the small ray slits first while the wall is strongest, then do the teeth, always sawing away from the narrow bridges.
Beginner-friendlyWide Grin and One Broad Tooth
Made for short, squat pumpkins, this goofy face pairs two upswept triangle eyes with an enormous grin interrupted by a single broad tooth hanging from the top lip. The eyes and mouth are cut through, and the tooth is simply a block of shell left in place inside the smile opening. Cut around the tooth carefully on both sides before removing the mouth pieces so it stays firmly attached.
IntermediateHeart Eyes and Three Teeth
Two big heart shaped eyes with curling lash accents beam above a small triangle nose and a wide grin broken by three square teeth. Every shape is cut all the way through, so candlelight pours out of the hearts and the toothy smile. Take the lash flicks slowly with a fine saw, since those narrow tips are the only fiddly part of this medium design.
Beginner-friendlyGoofy Buck-Toothed Smile
A cheerful jack-o'-lantern face built from two tall arched crescent eyes and a huge open grin anchored by a pair of oversized buck teeth. Every shape is cut all the way through, so the eyes and smile glow brightly while the goofy overbite stays as solid pumpkin. This is an easy first carve; saw slowly around each tooth from the mouth opening inward so the narrow tooth tabs never snap.
Expert / ProTwenty-Two Ray Smiling Sun
A beaming sunburst face with closed happy crescent eyes, a small triangle nose, and a huge picket-tooth grin, all encircled by a radiating ring of alternating teardrop and triangle ray cutouts. Every ray, tooth gap, and feature pierces through, and the sheer count of small openings makes it an expert carve. Cut the outer rays in sequence around the circle first, rotating the pumpkin as you go, before opening the large mouth.
Expert / ProPetal Border and Button Nose
A whimsical folk-art face with pupil-in-eye ovals, arched lash brows, a button nose, and a scalloped grin full of rounded teeth, all surrounded by a lush border of petals, leaves, and teardrops. Dozens of small openings cut through, which is what earns the expert rating despite the friendly look. Work from the center of the face outward to the border so early cuts never weaken the wall around later ones.