Similar to This
View all stencils →About this stencil
A friendly little porch face with two big round eyes, each notched by a small skin tab, above a wide banner smile broken up by chunky square teeth. All openings are pierced clean through, so the whole expression lights up at night. It is an easy pattern for beginners; remove the small tooth gaps first while the wall around them is still strong, then free the large mouth section. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 50-75 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Carve the eyes and pupils. Open both regions marked 1, keeping the round white lower pupils attached to the shell. Follow each eye dome, then use short strokes around the pupil without cutting its lower connection.
- Finish the chunky smile. Cut region 2 around two broad upper teeth and the lower central tooth. All three white teeth remain attached to their lips. Preserve the narrow openings around them and leave a corner tab until the mouth plug is supported.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlyCrescent Eyes and Curved Smile
Pure cheer: two upturned crescent eyes squint with delight above a huge toothless smile that curls up at both corners. All three shapes are pierced through so the whole face beams with candlelight, and the matching curves give it a warm, laughing character. This easy pattern rewards smooth cutting; saw each crescent in one steady motion following the curve, and round off the smile's corners rather than leaving sharp points.
Beginner-friendlySmall Triangle-Eyed Smile
Made with small pumpkins in mind, this cheerful face uses two modest triangle eyes and a single wide crescent smile with no teeth to fuss over. All three shapes are cut straight through, giving a warm, friendly glow from even a tabletop-sized pumpkin. It is one of the easiest carves on the site; on a small pumpkin, use a thin serrated saw and cut the smile from the center outward so the thin curve stays even.
Beginner-friendlyRound-Eyed Simple Smile
The friendliest face on the porch: two big round eyes above one broad crescent smile, and nothing else. All three shapes are full cut-throughs, so the whole design glows warm and even. With only three openings and no sharp corners, this is a perfect first carve; keep the saw moving in smooth curves and pop each piece out from the inside for the cleanest edges.
Beginner-friendlyWhite-Pumpkin Happy Face
A cheerful jack-o'-lantern face with big rounded eyes, a small triangle nose, and a wide crescent smile with a single square tooth. Every feature is fully cut through, so the whole face glows once a candle goes in. It looks especially striking on a white pumpkin, where the warm light pops against the pale skin. An easy first carve; just leave the little bridge above the tooth intact so the grin holds its shape.
Expert / ProPetal Border and Button Nose
A whimsical folk-art face with pupil-in-eye ovals, arched lash brows, a button nose, and a scalloped grin full of rounded teeth, all surrounded by a lush border of petals, leaves, and teardrops. Dozens of small openings cut through, which is what earns the expert rating despite the friendly look. Work from the center of the face outward to the border so early cuts never weaken the wall around later ones.
Beginner-friendlyCrescent Eyes and Broad Smile
Two upswept crescent eyes squint with joy above an enormous open smile that stretches nearly the full width of the pumpkin, curling up into playful points at each corner. Just three cut-through openings make the whole face, with no nose, teeth, or fragile bits anywhere. This easy design is pure beginner fun; carve the big smile first while the wall is strongest, then the two eye crescents, angling your blade slightly outward so the pieces push free cleanly.