Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Tall Happy Face pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A big cheerful face for tall pumpkins: two large round eyes with attached rind pupils, a small triangle nose, and a huge open grin with a single square tooth notching the lower lip. All the features are cut through for maximum glow. Keep the eye pupils attached by leaving their connecting bridges generous, and angle your blade slightly outward so the round openings do not pinch inward as the pumpkin softens. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Estimated time: 40-60 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 40-60 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Keep the tall eye pupils. Cut the three regions marked 1. Both tall eyes wrap around rounded pupils attached below; the right pupil leans outward. Keep those lower connections intact, then open the small rounded triangle nose.
- Finish the wide happy smile. Cut region 2 around the raised corners and the single broad white tooth rising from the lower left. Keep that tooth attached to the lower lip. Support the large smile plug and finish each outer corner with short cuts.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyThe Big Softie Pumpkin Stencil
Pure cheer: two upturned crescent eyes squint with delight above a huge toothless smile that curls up at both corners. All three shapes are pierced through so the whole face beams with candlelight, and the matching curves give it a warm, laughing character. This easy pattern rewards smooth cutting; saw each crescent in one steady motion following the curve, and round off the smile's corners rather than leaving sharp points.
Beginner-friendlyThe Gentle Beam Pumpkin Stencil
A tall, friendly face made of just three shapes: two upright oval eyes and one deep crescent smile sweeping nearly the full width of the pumpkin. All three openings are pierced through, and the design especially suits oblong or elongated pumpkins. It is an easy carve with big forgiving shapes; cut the wide smile in two halves that meet at the center bottom so the long curve stays smooth and the flap comes out in manageable pieces.
Beginner-friendlyToothy Tot Pumpkin Stencil
A cheerful four-hole face: two big round eyes, a small triangle nose, and a wide upturned smile with a single square tooth hanging from the top lip. Everything is a simple cut-through opening with no fragile details, making it one of the friendliest first carves for kids helping out. Drill or trace the round eyes with a cup or cookie cutter for perfectly smooth circles.
Beginner-friendlyTimeless Triangle Grin Pumpkin Stencil
This is the timeless jack-o'-lantern: two tall triangle eyes, a small triangle nose, and a broad crescent smile, all cut straight through the shell. With only four openings and no fragile details, it is an ideal first carve for a new pumpkin carver. Poke pilot holes at each triangle corner before sawing so your straight lines meet exactly where they should.
Beginner-friendlyLittle Flicker Pumpkin Stencil
Made with small pumpkins in mind, this cheerful face uses two modest triangle eyes and a single wide crescent smile with no teeth to fuss over. All three shapes are cut straight through, giving a warm, friendly glow from even a tabletop-sized pumpkin. It is one of the easiest carves on the site; on a small pumpkin, use a thin serrated saw and cut the smile from the center outward so the thin curve stays even.
Beginner-friendlyThe Gap-Tooth Grin Pumpkin Stencil
A timeless porch jack-o'-lantern with peaked half-round eyes, a triangle nose, and a broad smile broken by offset square teeth on the top and bottom lip. Every element is a full cut-through, so it lights up brilliantly at dusk. Cut the mouth last and remove it in tooth-sized sections; sawing the whole smile as one piece puts stress on the little tooth tabs.





