Similar to This
View all stencils →About this stencil
The entire continental United States glows as one big cut-through window, from the Pacific Northwest corner down around Florida's dangling peninsula and Texas's southern point. All the interior is removed while the national border stays crisp in the surrounding skin. This one earns its hard rating on the coastlines: take the Gulf inlets, Great Lakes bumps, and the narrow Florida peninsula in small careful cuts to keep the outline true. This design is rated Advanced and takes most carvers around 150 minutes from trace to glow. Multi-layer cuts with skin-peel shading. Plan your cuts first.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 65-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Shape the Great Lakes inlets. Begin region 1 along the narrow northern lake notches. Keep their white fingers attached above and use short strokes around the small hooked ends.
- Follow both coastal outlines. Trace the western side and southern border toward Texas, then the northeastern shoulder and Atlantic side. Preserve the shallow white bays along both coasts.
- Finish the southern peninsulas. Work around the Texas point, Gulf curve and narrow Florida extension. Support the broad plug and leave a short tab until all delicate coastal tips are finished.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a linoleum cutter set, x-acto knife, peel tool, and pin transfer wheel. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedNew York State Shape
The Empire State glows in full detail, from the straight Pennsylvania border to the jagged Adirondack edges and the skinny finger of Long Island trailing off the bottom right. The entire state interior is one pierced opening. Long Island is the trickiest part, so cut that narrow strip last with the tip of your saw and support the surrounding shell with your free hand as you work.
IntermediateMaine State Shape
Maine's craggy outline fills the pumpkin as a single glowing cutout, from the pointed northern crown down to its famously jagged coastline. The entire state interior is removed while the rind around it stays solid, so the border reads crisply once lit. The ragged coastal edge is what makes this a medium carve: trace it slowly with a fine saw and do not worry about tiny inlets, since the overall shape sells the design from a few feet away.
IntermediateNew Hampshire State Shape
The unmistakable tall, tapering outline of New Hampshire, cut fully through as one glowing state silhouette. Everything inside the border comes out, leaving the surrounding rind as the dark frame that defines the shape. This medium carve is one large opening, so work in short, connected saw strokes around the jagged northern border and remove the piece in two or three sections instead of forcing out one big slab, which can tear the notched edges.
IntermediateOklahoma State Shape
Oklahoma's distinctive silhouette, from the long skinny panhandle to the notched southern border, cut fully through so the entire state shines as a single lit shape. The interior is removed in one large piece while the rest of the pumpkin stays solid. Because the panhandle is a narrow strip, this medium design carves best if you cut that section last and support it with your free hand as you finish.
IntermediateCalifornia State Shape
The unmistakable outline of California cut fully through the pumpkin wall, glowing as one tall golden silhouette. The entire state shape is removed while the surrounding rind stays intact to frame it. The long straight eastern border and the jagged coastline meet at narrow angles, so take the coast in short, connected strokes rather than one continuous pull to avoid cracking the point at the southern tip.
IntermediateTexas State Shape
The unmistakable outline of Texas, panhandle and all, cut clean through the pumpkin wall so the whole state glows as one bold window of light. Everything inside the border is removed and the surrounding skin is left untouched, making the shape pop from across the yard. At medium difficulty, take the jagged Rio Grande border slowly in short strokes so the wiggly southern edge stays recognizable.