Similar pumpkin stencils
View all stencils →About this stencil
This free God Bless the USA pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. Bold block lettering spells out "GOD BLESS THE U.S.A." across two lines, with small five-pointed stars separating the letters in the lower line. The upper row uses chunky serif-style caps and the lower row uses even larger, slightly decorative capitals. Every letter interior is pierced through so the full phrase blazes when the pumpkin is lit. Keep the thin straps of orange between adjacent tall letters intact as you carve, since they carry the structural load of the entire upper row. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Advanced. Estimated time: 90-150 minutes. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 90-150 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the small top-row letters first. Carve GOD BLESS THE across the top while the wall is at full strength. Work letter by letter, left to right if you are right-handed, and treat each stroke as its own small plug. Several letters, like the O, D, B, and E, are split into separate strokes by white gaps; never cut across those gaps.
- Cut the two stars. Remove the small star between the U and S and the one between the S and A. Saw toward each of the five points from both sides so the tips stay crisp.
- Carve the U and S. Cut the big U, freeing its inner white channel carefully, then the S, working through both curves of the spine. Free the tapered ends of each stroke first, then connect along the long edges.
- Finish with the A. The A is the last big plug. Cut around the white notch at its base and the angled crossbar area, leave a small tab on one leg until the rest is free, then support the plug and cut it loose.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedUnited States Mainland
The entire continental United States glows as one big cut-through window, from the Pacific Northwest corner down around Florida's dangling peninsula and Texas's southern point. All the interior is removed while the national border stays crisp in the surrounding skin. This one earns its hard rating on the coastlines: take the Gulf inlets, Great Lakes bumps, and the narrow Florida peninsula in small careful cuts to keep the outline true.
AdvancedTrump 2024 Pumpkin Stencil
Bold military stencil-style lettering spells "TRUMP" on the top row and "2024" flanked by two five-pointed stars on the bottom row of this hard pumpkin stencil. Each letter and numeral is a thick open outline with interior counters preserved as solid pumpkin islands. The two stars at the sides of "2024" are each pierced through as open silhouettes. Cut the enclosed counters of rounded letters and numerals first (the interior of the P, the U loops, and the 0 counter in 2024), then cut each letter and numeral outline, saving the two star shapes for last.
AdvancedI Love USA Pumpkin Stencil
The text "I" stacked above a heart filled with an American flag pattern, then "USA" below it, makes up this patriotic pumpkin stencil: the flag-heart shows a grid of small stars on the left and horizontal stripe bars on the right, while the bold block letters are cut as open shapes. The letters and star shapes pierce through so the pumpkin glows with text and a star-field simultaneously. Cut the individual stars inside the flag-heart before removing the surrounding letter openings so the fine star shapes stay supported by the neighboring skin as long as possible.
AdvancedAmerican Flag Heart Pumpkin Stencil
A heart-shaped American flag fills this hard-level pumpkin stencil, with the left half showing rows of five-pointed stars arranged in a grid and the right half showing horizontal stripe bars tapering as the heart curves toward the bottom point. Every star and every stripe bar is cut away as an open shape so the lit jack-o-lantern shows the heart glowing in a dense pattern of small lights. Cut each individual star point carefully before opening the stripe sections to the right, since the star grid is the most intricate area and needs surrounding skin intact for support.
AdvancedMake America Great Again Pumpkin Stencil
Four lines of bold stencil-style block text spell out MAKE AMERICA GREAT AGAIN across this jack-o-lantern stencil, with a five-pointed star flanking the top line and another pair of stars at the bottom. Every letter and star is carved as a separate pierced shape, so the orange pumpkin wall forms bridges inside closed letterforms like A, G, and R. Before cutting, secure those interior letter islands with a small pin through the pumpkin flesh so they don't drop out mid-carve and leave shapeless holes.
Expert / ProGod Bless America Pumpkin Stencil
Bold block lettering spelling "GOD BLESS" arches above a full American flag, with the canton's grid of 50 open stars and seven horizontal stripes cut through below, and "AMERICA" in wide stencil letters across the bottom of this pumpkin stencil. The stars are the most demanding element: each is pierced individually while thin pumpkin skin forms the canton background. Cut the stripe sections and base text first, then work through the star field from the center outward to keep the canton wall stable.