Similar to This
View all stencils →About this stencil
A werewolf face in full-snarl fills the entire design with shaggy fur radiating outward in dozens of pointed spikes, wild round eyes, and a wide open mouth showing exposed fangs and tongue. The fur spikes are individually cut through and radiate from the face in all directions, creating an extremely dense, lacy pattern when lit. Work from the outer fur tips inward toward the face, cutting each spike cluster before moving to the face features; this keeps the many thin bridges between spikes intact and supported for as long as possible. This design is rated Expert / Pro and takes most carvers around 240 minutes from trace to glow. Sculpting-grade work. Three or more depth layers, fine detail.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery tea lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Transfer the stencil with a pin tool, marking every fur spike tip and the facial feature edges.
- Begin at the outermost ring of fur spikes, cutting each pointed tip away from the center.
- Work inward ring by ring, cutting the mid-fur layer spikes before reaching the face.
- Carve the eyes and brow ridge cuts next, leaving the small rounded iris islands in place.
- Cut the open mouth void and the individual fang shapes, preserving the tongue island between the lower fangs.
- Use a bright white LED inside so the dense radiating fur pattern creates a sharp halo effect.
Tools you'll need
For a expert / pro carve like this you'll want a full ribbon tool set, clay sculpting loops, x-acto knife, and dremel (optional). Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Homemory LED Tea Lights
24-pack of battery-operated lights
Battery-operated, flickering lights for a candle-like glow inside your finished pumpkin.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
- Advanced
Crouching Werewolf Pumpkin Stencil
A stocky werewolf crouches forward in an aggressive stance in this hard pumpkin stencil, with a spiky mane of fur bristling along its back, a snarling open-mouthed face showing sharp teeth, and thick clawed legs ready to spring. The design uses open cuts for the face interior and the gaps between the leg and body fur tufts, with solid pumpkin ridges defining each tuft shape when lit. Cut the teeth row inside the open mouth before removing the surrounding head-area cuts so the small tooth gaps remain stable.
- Expert / Pro
Flame Werewolf Pumpkin Stencil
A werewolf head in profile faces right, built entirely from flame-shaped strokes and pointed fur tufts that radiate outward from a snarling snout and bared teeth, creating a tribal-tattoo effect across the whole pumpkin face. The design has no large open areas; instead dozens of narrow flame cuts pierce through, leaving thin pumpkin bridges between each cut that glow orange and separate clearly from the negative space. Cut the smallest innermost flame tips around the snout first, then spiral outward to the largest wing-like strokes at the edges.
- Expert / Pro
Howling Werewolf Moon Pumpkin Stencil
A howling werewolf perched on a rocky cliff dominates this expert pumpkin stencil, with a large full moon carved as an open oval behind the creature. The moon's interior is a solid pumpkin island held in place by a narrow strip at the top where the wolf's body bridges it. Scraggly pine trees and scattered bat silhouettes flank the scene, their fine spiky branches adding delicate pierced detail against the candlelit opening. Carve the large moon opening first to anchor the composition, then work outward through the bats and trees, leaving the thin bridge at the wolf's neck for last.
- Expert / Pro
Werewolf Full Body Pumpkin Stencil
An expert-level werewolf pumpkin stencil depicting a muscular beast mid-stride, head thrown back in a snarl, clawed hands reaching forward, and fur rendered in dozens of jagged radiating cuts around the shoulders, arms, and legs. The face detail is dense: open jaws with visible fangs, heavy brow, and scattered facial fur cuts create a fiercely layered silhouette. Because many fur elements are isolated islands, tape a backing sheet over the stencil after transfer so small pieces cannot drop inside the pumpkin until you are ready.
- Expert / Pro
Werewolf Pumpkin Stencil
A snarling werewolf portrait fills this expert pumpkin stencil from collar to crown: matted fur radiates around the brow, small rounded ear nubs press against the sides of the skull, heavy brow ridges overhang narrow angular eye slits, and bared fangs show at the lower lip. The face is built from many floating islands of pumpkin skin held together by thin bridges, so lit from within every feature reads in warm orange relief against the glowing gaps. Work from the smallest detail shapes outward, leaving the large forehead and cheek sections until last so the bridges keep all floating pieces locked in place.