Similar pumpkin stencils
View all stencils →About this stencil
This free Midnight Howler pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. An expert-level werewolf pumpkin stencil depicting a muscular beast mid-stride, head thrown back in a snarl, clawed hands reaching forward, and fur rendered in dozens of jagged radiating cuts around the shoulders, arms, and legs. The face detail is dense: open jaws with visible fangs, heavy brow, and scattered facial fur cuts create a fiercely layered silhouette. Because many fur elements are isolated islands, tape a backing sheet over the stencil after transfer so small pieces cannot drop inside the pumpkin until you are ready. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Expert / Pro. Actual time varies with preparation, pumpkin size and experience. Intricate details and fragile supports need patience. Technique depends on the design; follow its PDF rather than assuming multiple depth layers.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Transfer all outlines carefully; this design has many small isolated cuts, so pin the paper or tape it firmly before poking.
- Begin with the largest open body sections, the inner torso gap and the upper chest, to relieve pumpkin wall tension early.
- Work outward through the fur cuts on the shoulders and upper arms, cutting each jagged tuft from root to tip.
- Tackle the face detail next: open jaws first, then the brow cuts, then the small scattered facial fur islands.
- Finish with the claw tips on both hands and the scattered foot fur, use a very thin blade and cut slowly to avoid snapping the points.
- Place a directional LED slightly above center so the raised snarling head catches the most light and the lower body recedes into shadow.
Tools you'll need
For a expert / pro carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and detail gouges if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Expert / ProFlame Werewolf Pumpkin Stencil
A werewolf head in profile faces right, built entirely from flame-shaped strokes and pointed fur tufts that radiate outward from a snarling snout and bared teeth, creating a tribal-tattoo effect across the whole pumpkin face. The design has no large open areas; instead dozens of narrow flame cuts pierce through, leaving thin pumpkin bridges between each cut that glow orange and separate clearly from the negative space. Cut the smallest innermost flame tips around the snout first, then spiral outward to the largest wing-like strokes at the edges.
Expert / ProHowling Werewolf Moon Pumpkin Stencil
A howling werewolf perched on a rocky cliff dominates this expert pumpkin stencil, with a large full moon carved as an open oval behind the creature. The moon's interior is a solid pumpkin island held in place by a narrow strip at the top where the wolf's body bridges it. Scraggly pine trees and scattered bat silhouettes flank the scene, their fine spiky branches adding delicate pierced detail against the candlelit opening. Carve the large moon opening first to anchor the composition, then work outward through the bats and trees, leaving the thin bridge at the wolf's neck for last.
Expert / ProWerewolf Face Pumpkin Stencil
A werewolf face in full-snarl fills the entire design with shaggy fur radiating outward in dozens of pointed spikes, wild round eyes, and a wide open mouth showing exposed fangs and tongue. The fur spikes are individually cut through and radiate from the face in all directions, creating an extremely dense, lacy pattern when lit. Work from the outer fur tips inward toward the face, cutting each spike cluster before moving to the face features; this keeps the many thin bridges between spikes intact and supported for as long as possible.
Expert / ProWerewolf Pumpkin Stencil
A snarling werewolf portrait fills this expert pumpkin stencil from collar to crown: matted fur radiates around the brow, small rounded ear nubs press against the sides of the skull, heavy brow ridges overhang narrow angular eye slits, and bared fangs show at the lower lip. The face is built from many floating islands of pumpkin skin held together by thin bridges, so lit from within every feature reads in warm orange relief against the glowing gaps. Work from the smallest detail shapes outward, leaving the large forehead and cheek sections until last so the bridges keep all floating pieces locked in place.
AdvancedCrouching Werewolf Pumpkin Stencil
A stocky werewolf crouches forward in an aggressive stance in this hard pumpkin stencil, with a spiky mane of fur bristling along its back, a snarling open-mouthed face showing sharp teeth, and thick clawed legs ready to spring. The design uses open cuts for the face interior and the gaps between the leg and body fur tufts, with solid pumpkin ridges defining each tuft shape when lit. Cut the teeth row inside the open mouth before removing the surrounding head-area cuts so the small tooth gaps remain stable.
IntermediateShadow Stalker Werewolf Pumpkin Stencil
Print the Shadow Stalker pumpkin stencil with a numbered cutting pattern and step-by-step guide. Intermediate design; print at actual size.