Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
23 results · Page 1 of 1
Bat and Moon Pumpkin Stencil
A crescent moon curves across the upper half of the design with a small bat silhouette flying in front of it, both cut through as a single pumpkin stencil. The crescent is a wide sweeping arc and the bat sits slightly below center within the curve, its wings spread and ears pointed. The bat's body stays connected to the moon's surface by a thin shared border; carve the crescent first and leave the bat's outer wing edges touching the moon arc so the bat doesn't shift before you finish the interior.
Bat Heart Pumpkin Stencil
A large heart with two bat wings spread wide forms this simple pumpkin stencil: the entire shape is a single solid silhouette to be cut away as one connected piece, leaving a bold heart-with-wings opening in the pumpkin face. The pointed wing tips extend on each side and have small secondary notches along the trailing edges. Because the whole design is one cut, work around the heart curves first, then trace out each wing tip slowly so the narrow notches do not tear before the main body of the shape drops free.
Bat Pumpkin Stencil
A front-facing bat with outstretched wings fills this jack-o-lantern pumpkin stencil, showing a snarling face at center and jagged wing edges that sweep to pointed tips on each side. The large background panels of each wing are cut away, leaving a solid bat silhouette with interior cut-outs for the eyes and facial features that glow distinctively when lit. Keep the narrow connecting bridge between the bat's body and each wing intact during carving so the whole design holds together.
Cartoon Bat Pumpkin Stencil
A cartoon bat with a round face, large round eyes, tiny fangs, and dramatically swept wings stretched wide is caught in mid-flight on this easy bat pumpkin stencil. The wing spans reach almost to the pumpkin's edges and are cut through as large open areas, while the small round face with its eye circles and a smile-line grin stays solid at the center. Cut the big left wing first, then the right, before tackling the face ring; this order keeps the face island stable until the very end.
Cartoon Bat Pumpkin Stencil
A round-bodied cartoon bat fills this Halloween pumpkin stencil, its wide goggle eyes left solid orange while the large circular head, fanned wing panels, and small ear tufts are all pierced through. The design reads instantly as a friendly yet spooky bat jack-o-lantern, with bold open shapes that glow warmly at night. Cut the large circular body opening first, then work outward to the wing panels so the surrounding pumpkin wall stays stable while you maneuver the knife.
Cowboy Skull Pumpkin Stencil
A grinning cowboy-hat skull faces three-quarters toward the viewer, its wide-brimmed hat battered and torn along the crown. Hollow eye sockets and an open jaw with individually delineated upper and lower teeth are pierced through, while the hat brim, cheekbones, and nose cavity form a complex arrangement of solid bridges. Flame wisps curl at the chin. When lit, the teeth row and eye sockets glow against the dark skull mass, creating a hard-boiled undead outlaw look. Cut each tooth gap individually rather than sweeping through the whole row to keep the ridges crisp.
Cute Bat Pumpkin Stencil
A chubby cartoon bat with pointed ears, large round hollow eyes, a small open mouth with two fangs, and wide jagged wings spread in a V-shape makes up this friendly easy bat pumpkin stencil. The wings, eyes, and mouth are all pierced through, leaving the round body as a solid center island held by the wing-edge bridges. To keep the central body from drooping inward once the wings are cut, carve each wing in two halves and leave a thin skin tab at the wingtip notches until the very last cut.
Cute Horned Monster Pumpkin Stencil
A chubby, wide-eyed cartoon monster with curved horns, small bat-like wings spread to either side, a smiling mouth, and stubby feet sits inside a large circular opening on this easy pumpkin stencil. The circular background and small body details are pierced through, leaving the round monster figure itself as a solid silhouette at the center. Because the circular outer ring is cut away entirely, score and remove it in segments rather than one piece to keep control of the blade near the wing tips.
Dracula Pumpkin Stencil
A bald, hollow-cheeked Dracula figure holds a grinning carved jack-o-lantern to his chest in this hard vampire pumpkin stencil. The face has arching brow ridges, deeply cut cheekbones, fang-edged lips, and small pointed ear nubs. Below the chin the figure's open cape forms a bat-wing shape, and the jack-o-lantern the vampire cradles shows its own triangular eyes and jagged smile as inner cutouts. The composition creates two overlapping scenes: a vampire face above and a glowing pumpkin face below. Work from the outside edge of the cape inward, and carve the inner pumpkin face last to avoid over-thinning the chest wall.
Flying Bats Pumpkin Stencil
Five bats in mid-flight are scattered across the pumpkin face in this hard pumpkin stencil, ranging from a large swooping bat in the upper left down to a small one at the lower right, each drawn with jagged, pointed wing edges and tiny body details. All five bats are cut through as separate open shapes, so candlelight spills through each one individually and the pumpkin reads as a night sky full of swooping shadows. Cut the smallest bottom-right bat first while the pumpkin surface is fully rigid, then work upward to the largest.
French Bulldog Pumpkin Stencil
A French Bulldog face stares straight out in this hard dog pumpkin stencil, its large upright bat ears, flat wrinkled muzzle, deep-set eye hollows, pushed-in nose, and jowl folds all captured as a continuous linework design with the open channels carved through and the skin ridges left intact. The ears are wide and open, connecting to the head via two curving lines that form thin bridges at the ear base. Carve the interior face details, including the eye hollows, nose curl, and jowl lines, before cutting the outer ear outlines, so the head stays rigidly attached while you work the delicate inner linework.
Gargoyle Pumpkin Stencil
A crouching gargoyle with spread bat wings, a fanged open jaw, and clawed feet fills this hard pumpkin stencil. The wings are rendered as multiple angled blade-like panels, the body and head form a compact central mass, and the whole figure is composed of closely spaced pierce-throughs separated by narrow pumpkin-wall bridges. Lit from within, the gargoyle appears as a fiery orange silhouette. Begin with the head and jaw details before cutting the wing panels, since the narrow bridges connecting the wing sections to the body spine are the most structurally critical lines in this design.
Graveyard Scene Pumpkin Stencil
A wide panoramic graveyard scene fills this pumpkin stencil from edge to edge: a gnarled bare tree dominates the right side with spidery branches, a crescent moon peeks above the tree line, two bats fly near the top left, a row of varied tombstones stretches across the middle ground, and a foreground of jagged dead grass and roots fills the bottom. All elements remain connected as a single cut sheet of pumpkin wall with the background space pierced away, so the entire scene glows in silhouette. Carve the bat shapes and moon sliver at the top first while the tall tree branches above them still anchor the upper wall.
Graveyard Scene Pumpkin Stencil
A bare, gnarled tree with reaching branches, a perched owl, two flying bats, and a cluster of cemetery cross tombstones fill a large crescent-moon frame in this expert graveyard pumpkin stencil. Nearly every element is a carved pierce-through, leaving thin orange bridges for the tree branches and tombstone edges. The lit pumpkin produces a richly detailed haunted graveyard scene. Start with the smallest elements inside the scene, such as the owl silhouette and the cross details on each tombstone, before the large moon arc is removed and the frame loses rigidity.
Halloween Graveyard Scene Pumpkin Stencil
A fully populated Halloween graveyard scene spans this expert pumpkin stencil: a bare dead tree at center with a jack-o-lantern hanging from one branch, two grinning jack-o-lanterns on the ground, a skeletal hand rising from the earth, a cross headstone, a wrought-iron fence section, a smaller rounded grave marker, a winged ghost in the upper left, and two bats in flight at the top right. All elements are connected along a common ground line with dozens of individual floating pieces throughout. Work from the upper corners inward, cutting bats and ghost first, then the tree, so the center ground elements are cut last while the skin is most rigid.
Haunted House Moon Pumpkin Stencil
A tall haunted mansion with jagged roofline towers, arched windows, and a wide front door fills the center of a large circular moon cutout in this pumpkin stencil. Two bats flank the upper towers, and tufts of grass sprout at the base. The moon circle is the main open cut, while the house is retained as pumpkin wall, glowing orange against the dark void. Carve the rectangular window openings and the door arch before cutting the surrounding moon circle, so the house structure has support while you work the fine edge details.
Howling Werewolf Moon Pumpkin Stencil
A howling werewolf perched on a rocky cliff dominates this expert pumpkin stencil, with a large full moon carved as an open oval behind the creature. The moon's interior is a solid pumpkin island held in place by a narrow strip at the top where the wolf's body bridges it. Scraggly pine trees and scattered bat silhouettes flank the scene, their fine spiky branches adding delicate pierced detail against the candlelit opening. Carve the large moon opening first to anchor the composition, then work outward through the bats and trees, leaving the thin bridge at the wolf's neck for last.
Jolly Roger Pumpkin Stencil
A classic Jolly Roger composition fills this hard pumpkin stencil: a large tricorn pirate hat at the top with an X emblem on its band, a grinning skull face below with oval eyes and a row of small separated teeth, and two crossed cutlass swords extending diagonally from behind the skull. The swords are cut as wide open shapes that frame the face, while the skull's eye sockets and the gaps between each tooth are the smallest, most fragile details. Carve the broad sword shapes first to release the large areas of pumpkin skin, then work inward to the fine tooth gaps using a narrow pointed blade.
Pirate Skull with Parrot Pumpkin Stencil
A weathered pirate skull in a battered tricorn hat stares out from this expert pumpkin stencil, a parrot perched on the skull's head and tattered coat lapels framing its hollow cheeks. The skull-and-crossbones badge on the hat, individual finger bones along the bottom, and ragged coat edges create dozens of intricate cut sections. Carve the small hat badge first, then the interior face hollows, before moving outward to the flowing coat edges where the thinnest bridges live.
Pumpkin with Vines Pumpkin Stencil
A jack-o-lantern-within-a-pumpkin stencil showing a grinning carved pumpkin face at the center, surrounded by a flowing arrangement of autumn leaves, curling vines, and a flying bat perched near the stem above. The inner pumpkin face, triangular eyes, jagged mouth, and stem, stays solid orange while the vine-and-leaf background area around it is pierced through to glow. Carve the outer leaf and vine shapes before opening the inner face cuts, so the decorative frame is complete and stable before you work near the center detail.
Skull Crown Ghost Pumpkin Stencil
A round skull face wearing a crumbling castle battlement crown tops this ghost pumpkin stencil. Large angry eyes with flame-shaped pupils, a small cracked nose bridge, and a row of jagged teeth fill the circular face, all pierced as cut-throughs while the surrounding ring frame and crown teeth remain as solid pumpkin. The lit jack-o-lantern glows through the eyes and mouth in a fierce scowl. Carve the crown battlements first before cutting the circle frame below, so the narrow wall sections holding the crown have full support while you work.
Snarling Bat Pumpkin Stencil
A wide-winged bat stretches nearly edge to edge in this easy bat pumpkin stencil, its wing panels divided by bold vein lines and a snarling cartoon face centered in the body. The wings are the large pierced areas that glow brightest, while the vein lines and the face details remain as solid orange strips inside the cutout. Carve the small pointed fangs in the face before tackling the big wing panels, so the blade has firm pumpkin wall support when making those fine cuts.
Three Bats Pumpkin Stencil
Three snarling bats in different sizes swoop across this bats pumpkin stencil: one large bat dominates the lower center with wide jagged wings and a gnashing face, a medium bat flies mid-right, and a small bat trails upper-left, all fully pierced through. The graduated scale creates depth on the jack-o-lantern face, and because the large bat's wing tips are long and thin, cut those points last after the broad wing voids are already removed to avoid snapping them during the heavy cutting.