Pumpkin carving templates
1159 free printable stencils. Download, print, trace, carve.
14 results · Page 1 of 1
Barred Cyclops Eye and Teeth
One huge round eye crossed by a vertical skin bar stares out above a stubby grin with two blocky teeth, giving this little cyclops a comically startled expression. The eye and mouth are cut through, with the center bar and both teeth left as standing strips of shell. It is an easy carve suited to smaller pumpkins; cut the eye as two half-circles on either side of the bar instead of one big circle, and the bar will never be at risk.
Cyclops Eye and Five Teeth
A goofy cyclops with one giant round eye under a curly brow, a small triangle nose, freckle dots on each cheek, and a huge laughing mouth with five stubby teeth. The features are cut through, and the pupil stays in place as an attached tab hanging inside the enormous eye. That pupil bridge is the medium-level test; cut both sides of the tab before freeing the rest of the eye circle.
Cyclops Monster Pumpkin Stencil
This one-eyed monster face jack-o-lantern stencil pairs a massive single eye opening at the top, with a crescent of solid orange forming the pupil island, with a lower face panel bearing a triangular nose and a wide blocky grin of square teeth. Both sections are fully cut through, flooding the pumpkin face with light. Keep the thin orange strip separating the upper eye section from the lower mouth panel intact as a structural bridge until the very last cut.
Long-Necked Cyclops Pumpkin Stencil
A quirky one-eyed long-necked creature with a rounded bird-like body, a spiral cyclops eye, and a jagged toothed mouth stands on two stubby feet in this easy Halloween pumpkin stencil. The body is largely pierced through as a dark void while the eye ring and neck details remain as uncut pumpkin. The thin neck connecting the large head to the body is the most delicate bridge in the design, so carve the body void and the mouth teeth first, then cut around the neck last to keep it from snapping early.
One Eye and Two Upper Teeth
A goofy one-eyed jack-o'-lantern with a huge round eye topped by a dark pupil circle, a small triangle nose, and a wide smile broken by two chunky upper teeth. The big eye, nose, and mouth are cut through, while the pupil area keeps a disc of skin attached at the top for contrast. Support the teeth by cutting away from their narrow roots, since those two tabs carry the whole grin.
One-Eye Arched-Brow Smile
A single giant eye dominates this friendly monster face, with a dark round pupil left in place at its center and a curved brow arched above. Below, a huge grin sweeps ear to ear with pointed dimples at each corner. The eye ring, brow, and smile are cut through while the pupil stays as an island of shell, which is what earns the medium rating; anchor that pupil with a toothpick from behind if it feels loose.
One-Eyed Furry Monster Pumpkin Stencil
A round, furry one-eyed monster stands full-body on this hard pumpkin stencil: a small round head with two stubby antennae sits atop a wide spherical body edged with shaggy fur, two four-fingered hands extend to either side, and two thick legs end in rounded shoes at the bottom. The mouth is a wide toothy grin with individual tooth gaps cut into the lower body. Carve the large body outline first since the shaggy fur spikes are easier to cut when the surrounding pumpkin skin is still firm; save the small tooth gaps inside the grin for last.
One-Eyed Horned Monster Pumpkin Stencil
A squat, wide-bodied one-eyed monster fills this hard pumpkin stencil from head to toe: a large circular head that doubles as the body, a single giant eye at center made of three concentric rings with a crescent cut-out pupil, two small curved horns at the top, three-clawed hands on short arms at each side, and a wavy skirt-like bottom hem. The three concentric eye rings are connected by thin skin bridges and are the most fragile element; carve the outermost eye ring first and work inward, letting each ring dry slightly before cutting the next.
One-Eyed Monster Pumpkin Stencil
A round one-eyed cartoon monster fills this funny pumpkin stencil, its single large circular eye containing a crescent pupil, a wide toothy grin below, and four spindly stick arms raised overhead, each ending in a three-fingered hand. The monster's body ring and arms are left as pumpkin skin, while the eye surround, mouth opening, and spaces between the fingers are cut through, glowing when lit. Carve the tiny gaps between the finger stubs before tackling the eye ring, since those narrow channels are easiest to control before the surrounding wall is weakened.
One-Eyed Worm Monster Pumpkin Stencil
A quirky one-eyed worm-like creature stands upright in this animals pumpkin stencil: a large circular head with a concentric inner eye ring and a crescent pupil, small antenna nubs around the head rim, a fanged grinning mouth, two tiny three-fingered arms raised at its sides, a long segmented body with ringed markings, and curling feet at the base. The thin connecting lines between head, body, and limb segments are the most fragile parts of this carving. Cut the small finger and toe tips before the body-segment cuts so the creature's extremities have maximum wall support.
Quartered Eye and Zigzag Grin
A huge single eye quartered by a bold plus-shaped bar dominates this monster mask, flanked by rows of diamond cutouts down each cheek, a tiny skull-like nose, and a jagged zigzag grin along the bottom. The eye quadrants, diamonds, nose, and zigzag are all cut through, with the plus bar and diamond lattice left as connected skin. This hard design demands order: carve the four eye sections first, then diamonds from the center outward, protecting that thin cross bar throughout.
Single-Eye Crescent Smile
One big round eye sits above a long crescent smile, giving this jack-o'-lantern a goofy cyclops charm with just two cuts. Both shapes are pierced fully through, and the wide openings make it a forgiving first carve for beginners. Trace the circle in short strokes so it stays round, then cut the smile from the center outward so both tapered corners of the grin match.
Six Spoke Cyclops and Fangs
An ornate one-eyed monster dominated by a giant spoke-wheel eye with six radiating spokes, surrounded by swirling filigree flourishes, teardrop cutouts, and a vast fanged grin ringed with diamond and dot accents. The entire composition is pierced through in an intricate lattice, leaving a delicate web of pumpkin between the glowing shapes. Strictly an expert project: use a fine-detail saw, carve the small accents before the large wheel and mouth, and support the wall from inside as it thins.
Wild-Haired One-Eyed Monster Pumpkin Stencil
This one-eyed monster character has a round head ringed with wild hair, a single large circular eye socket, a wide grinning mouth, and a short stubby body with splayed hands and feet. The stencil mixes solid areas (the pupil island inside the eye, the hair fringe, the torso patches) with pierced cutouts for the eye socket, mouth, and body gaps. Lit from inside, the monster's oversized eye glows brightly while the hair and body details form a dark, shaggy border. Keep the small circular island inside the eye intact, losing it turns the design from a recognizable eye into a plain hole.