Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
10 results · Page 1 of 1
Couple Silhouette Heart Pumpkin Stencil
Two facing human profiles, one with short-cropped hair and one with a pointed ear detail, are arranged nose-to-nose inside a heart shape so their silhouettes form both the couple and the lobes of the heart on this easy romantic pumpkin stencil. The large heart interior is cut away entirely on each side of the profiles, while the facing figures remain as solid dividers. The narrow chin-to-chest strip between the two faces is the key bridge; run your blade along each profile edge independently rather than trying to cut the gap in a single pass.
Eight Hearts and Eight Dots
Eight hearts arranged in a ring, each one pointing outward like petals on a wreath, with eight small round dots glowing in the gaps between them; the center of the pumpkin stays solid. Every heart and dot is cut through, turning the whole design into a radiant circular pattern. A medium carve that rewards accuracy: trace the stencil carefully so the ring stays even, and drill the dots before sawing the hearts around them.
Entwined Hearts & Leafy Vines
Two interlocking hearts sit at the center of this romantic design, their looping outlines woven together and trailing off into curling vines and small leaves at each corner. The whole motif is shaved into the skin as pale relief lines, so the pumpkin wall stays intact and the pattern shows clearly by daylight or candlelight. Follow the vine curves in long continuous strokes to keep the linework flowing and even.
Interlocking Double Hearts
Two large hearts overlap and interlock, their outlines woven so one band passes over and under the other like linked rings. Nothing is pierced: you shave away only the skin along the heart outlines, leaving pale glowing bands against the untouched orange wall. Sketch the over-under crossings on the pumpkin before you shave, since keeping those weave points straight is the trick to this medium-level etch.
Interwoven Hearts and Leaves
Two large hearts interlock at the center, their outlines woven over and under each other like linked rings, with vine tendrils and autumn leaves flourishing around them. The design is deep relief shading: the background is shaved bright while the woven heart bands stay raised, with no holes pierced. Map the over-under crossings before you carve; keeping the weave consistent is the expert part.
LOVE Block Pumpkin Stencil
"LOVE" is arranged in a two-by-two block format, with "LO" on the top row and "VE" below, echoing the famous Robert Indiana sculpture. Each letter is cut through in rounded, chunky sans-serif type and the four characters together form a near-square composition. The internal counters of the "O" and the enclosed angle of the "V" need to be freed as islands; carve those interior pieces before removing the surrounding letter bodies so they stay fixed in place by the adjacent wall material.
LOVE Pumpkin Stencil
Four tall serif capitals spell out "LOVE" in a single row, each letter sized to span the full height of the pumpkin face, with the word cut completely through so it glows solid when lit. The letterforms use clean, wide strokes with minimal internal bridges, making this one of the most legible word-carving pumpkin stencils in the set. Because the "O" and the interior counter of the "V" require small floating pumpkin islands, remove those internal pieces before fully clearing the surrounding letter to avoid them dropping out unexpectedly.
Love Wins Pumpkin Stencil
A large bold heart dominates the design, split horizontally at its midpoint by a band of stencil text that reads "LOVE WINS" in thick block letters. The upper and lower halves of the heart are both pierced through, and the text band bridges the gap so the heart reads as one unified glowing shape when lit. Because the heart's two halves are each large open voids, carve them before the text strip; clearing the big areas first lets you see exactly how much wall support remains around the letter bridges.
Six Hearts and Tiny Top Heart
Six hearts arranged in a ring point inward toward the center, with a tiny seventh heart crowning the top and small round dots filling the gaps between them like beads on a wreath. Every heart and dot is cut fully through, creating a lantern that throws a circle of glowing hearts across the porch. For this medium carve, poke a starter hole in each heart and cut the notch last; the dots are quick work with an apple corer or drill bit.
Two Profiles Within a Heart
A large heart is cut out of the pumpkin, but two facing profiles are left standing in the middle of the opening, so a couple appears to lean toward each other in silhouette against the glow. The heart interior is removed while the joined profile column stays attached at the bottom point. This is a hard carve because those noses, lips, and chins are thin; use a fresh fine blade and cut away from the profiles, never into them.