Similar pumpkin stencils
View all stencils →About this stencil
This free Love Wins pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A large bold heart dominates the design, split horizontally at its midpoint by a band of stencil text that reads "LOVE WINS" in thick block letters. The upper and lower halves of the heart are both pierced through, and the text band bridges the gap so the heart reads as one unified glowing shape when lit. Because the heart's two halves are each large open voids, carve them before the text strip; clearing the big areas first lets you see exactly how much wall support remains around the letter bridges. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Advanced. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the LOVE WINS letters. Start with the band of stencil letters across the middle. Cut each letter plug separately, working left to right; the O of LOVE and the W and S of WINS come out in more than one piece, so leave the thin white gaps that split them intact.
- Mind the white band. A horizontal white strip separates the lettering from the heart above and below it. Keep every cut inside the gray shapes so this band stays solid; it is what holds the design together.
- Remove the top of the heart. Cut the two rounded heart lobes above the letters. This is a large plug; cut the dip at the top from both sides, leave a short tab on one edge until last, then support the piece and lift it out.
- Remove the heart point. Finish with the big triangular bottom of the heart. Cut both long sides toward the point, leave a tab on the flat top edge, then support the plug, finish the cut, and push it through from inside.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedEntwined Hearts & Leafy Vines
Two interlocking hearts sit at the center of this romantic design, their looping outlines woven together and trailing off into curling vines and small leaves at each corner. The whole motif is shaved into the skin as pale relief lines, so the pumpkin wall stays intact and the pattern shows clearly by daylight or candlelight. Follow the vine curves in long continuous strokes to keep the linework flowing and even.
AdvancedSweetheart Silhouettes Pumpkin Stencil
A large heart is cut out of the pumpkin, but two facing profiles are left standing in the middle of the opening, so a couple appears to lean toward each other in silhouette against the glow. The heart interior is removed while the joined profile column stays attached at the bottom point. This is a hard carve because those noses, lips, and chins are thin; use a fresh fine blade and cut away from the profiles, never into them.
AdvancedLOVE Block Pumpkin Stencil
"LOVE" is arranged in a two-by-two block format, with "LO" on the top row and "VE" below, echoing the famous Robert Indiana sculpture. Each letter is cut through in rounded, chunky sans-serif type and the four characters together form a near-square composition. The internal counters of the "O" and the enclosed angle of the "V" need to be freed as islands; carve those interior pieces before removing the surrounding letter bodies so they stay fixed in place by the adjacent wall material.
AdvancedI Love West Virginia Pumpkin Stencil
This West Virginia pumpkin stencil arranges four chunky shapes in the classic "I heart state" grid: a tall rounded I, a wide heart, and the double abbreviation WV below, every piece carved fully through. The two matching V shapes in WV share a similar silhouette but sit side by side with a narrow gap between them; keep that gap cleanly cut so the two letters read as distinct when lit. A bright LED puck placed low inside the pumpkin casts the WV letters into sharp relief against the glowing heart above.
AdvancedI Love New Hampshire Pumpkin Stencil
Rated advanced, this New Hampshire pumpkin stencil presents "I [heart] NH" in two rows with oversized block letters. The "N" and "H" are rendered in wide rounded caps: the "N" has a diagonal stroke creating a narrow wedge, while the "H" has a horizontal crossbar suspended between two uprights, leaving two open windows on either side. Tackle the "H" crossbar with plunge cuts at each end before sawing across to prevent the bridge from snapping under blade pressure.
AdvancedI Love Maine Pumpkin Stencil
This Maine pumpkin stencil carves the bold "I [heart] ME" layout made famous by state-pride apparel: a tall serif "I" and a large smooth heart sit above the wide two-letter abbreviation "ME" in chunky rounded type. All four shapes are fully pierced through, so the jack-o-lantern glows with bright, clean cutouts against the orange wall. Because the heart is the largest single opening, carve it last to preserve structural support while you work through the tighter letter forms first.