Similar to This
View all stencils →About this stencil
Two tall oval eye holes and a long horizontal stitched mouth with cross-bar teeth form the three pieces of this minimalist Skellington-style pumpkin stencil, recognizable for its sparse, elongated proportions. The eyes are simple solid ovals and the mouth is a single wide slot with evenly spaced vertical tines. Because all three cutouts are surrounded by smooth uncut pumpkin, placement matters: center the stencil higher on the pumpkin face than you think you need to, so the long mouth lands in the rounder mid-section where the wall is thickest and the tine cuts are less likely to blow out. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 30-45 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the left eye. Start with the tall tilted oval on the left. Saw it in smooth overlapping arcs and push the plug through from inside.
- Cut the right eye. Repeat with the right oval, which leans the opposite way. Keep the blade vertical so the backlit shape stays as clean as the front.
- Cut the stitched mouth. Work the long curved mouth last. Cut around each short stitch tine with its own pair of small cuts, moving along the seam one tine at a time rather than dragging the saw through the turns. Leave a section at one end attached until the whole outline is done, then support the long piece and lift it free.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedThe Bone Warden Pumpkin Stencil
This menacing bony mask glares through huge slanted eye sockets, flares a split skeletal nose, and bares a wall of long vertical teeth framed by curved fangs at each corner, with angular temple slashes radiating from the sides. The sockets, nostrils, tooth gaps, and slash marks are all cut through, leaving thin ribs of skin as the teeth. Hard-level advice: carve the eight narrow tooth slits with a fine blade and leave the outer fangs until the very end.
IntermediateBone Chomper Pumpkin Stencil
This clever skull face swaps ordinary teeth for a row of four upright dog-bone shapes beneath two big oval eyes and a small triangle nose. Eyes, nose, and each bone tooth are pierced fully through so the whole skeletal grin glows. The rounded bone ends are the trickiest part of this medium carve; drill or poke a starter hole in the center of each bone, then saw outward so the knobby tips keep their shape.
Expert / ProSkeleton Guitarist Pumpkin Stencil
A Day of the Dead skeleton musician stands full-body on this expert pumpkin stencil, wearing a wide-brimmed sombrero and playing a guitar: the skull face shows simple round eyes and a stitched nose, the ribcage is rendered as horizontal bone-slat cut-outs on the torso, the guitar strings are five parallel pierced lines, and the bony legs end in boots. The five guitar strings are the most fragile element, each a thin channel of open space; carve them last with a very sharp narrow blade in single straight strokes, and support the surrounding pumpkin skin with one finger while cutting.
Beginner-friendlySkull Face Pumpkin Stencil
A skull face pumpkin stencil built from two large circular eye sockets, a heart-shaped nasal cavity, two angled cheekbone tabs, and two rows of individual oval teeth lining an open jaw. All the white areas cut through, so the finished jack-o-lantern reads unmistakably as a skeleton against the dark. The two rows of closely packed oval teeth are the trickiest part: cut each tooth individually rather than scooping the whole jaw at once, and leave the tiny bridges between them for last so none tip inward.
Beginner-friendlyNew Jersey Heart Lettering
Show some Garden State love with this bold lettering design: the word I, a big glowing heart, and the letters N and J stacked in a classic two-row layout, all pierced fully through the pumpkin wall. The chunky serif letters are forgiving for an easy carve; cut each letter stroke as its own piece rather than one big chunk, and save the J's curved hook for last since its tail is the thinnest part.
Beginner-friendlySouth Carolina Heart Lettering
State pride spelled out plainly: a bold serif I, a big glowing heart, and the letters SC stacked in two rows across the pumpkin face. Each letter and the heart cut fully through, and the thick strokes make this an easy lettering carve with no fragile pieces. Cut the heart's top notch first to set its shape, then saw each letter stroke in straight runs, squaring the serifs from inside the openings.