Similar pumpkin stencils
View all stencils βAbout this stencil
This free Lone Star pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. One broad five-point star fills the front of the pumpkin as a single dramatic cutout. The entire star is pierced through, leaving a clean rim of pumpkin around it, so a candle inside turns the whole shape into a lantern window. As an easy design it is ideal for beginners; draw a guide dot at each of the five points before cutting, then connect them with straight strokes so the star stays symmetrical. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Beginner-friendly. Estimated time: 25-40 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 25-40 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Trace the five outer points. Cut region 1, following the tall top point, broad side arms and two lower points. Keep each inward white notch attached to the surrounding shell.
- Finish the inward corners. Use short strokes toward each notch. Preserve the slightly uneven lower points and broad central opening; avoid bending the white tips between the star arms.
- Release the single star plug. Leave a small tab on a broad edge while completing the points. Support the plug, sever that tab and lift the piece free without twisting against the five white notches.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyShooting Star Pumpkin Stencil
One big five-pointed star dominates the pumpkin with three small round dots arcing beneath it, like a shooting star leaving a trail. Both the star and the dots are straightforward cut-through openings, making this a perfect first stencil for young helpers with an adult on the knife. Drill or poke the three dots first as warmups, then saw the star point to point, backing out at each corner.
Beginner-friendlyStar & Four Dots
One big five-pointed star sits at the center of the pumpkin, ringed by four round polka-dot holes above, below, and to each side. Every shape is cut fully through, turning the pumpkin into a cheerful lantern that throws star and dot patterns onto nearby walls. This easy design is a great first carve; drill or scoop the four circles first, then saw the star point to point so the tips stay sharp.
IntermediateSunrise Rainbow Pumpkin Stencil
Three nested rainbow arcs curve over a low half circle sun, filling the bottom of the pumpkin with stacked bands of light. Each arc is cut through while narrow ribs of rind stay between the bands, which is what creates the layered glow. Keep those ribs at least half an inch wide as you carve this medium design, since they carry all the structure.
IntermediateMartini Glass with Olive
A tall martini glass with a skewered olive resting on the rim, drawn in clean bar-sign style from the wide conical bowl down the slender stem to the round base. It carves as skin-shave shading, so the glass appears as smooth pale relief against the dark rind with no pierced openings. A medium project overall; keep your peeling depth even across the big bowl, and leave the thin stem for careful last strokes.
IntermediateLittle Constellation Pumpkin Stencil
Three five point stars in different sizes drift diagonally across the pumpkin, joined by a scatter of small round dots like distant starlight. Each star and dot is cut fully through, turning the whole pumpkin into a little constellation lantern. The medium challenge is the stars' inner corners; use a thin blade, cut point to point, and finish the tiny dots with a drill or apple corer.
IntermediateStarburst Sparkle Pumpkin Stencil
A large eight point star anchors the center while small diamonds and dots scatter around it like a burst of night sky sparkle. Every shape is a clean cut-through opening, so the pumpkin throws star shaped light across nearby walls and steps. Cut the big star's inner corners with a fine blade and pop the little diamonds out gently to keep their sharp points intact on this medium pattern.





