Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Cartoon Skull and Crossbones pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A cartoonish skull-and-crossbones fills this pumpkin stencil: a round skull with raised eyebrow lines, two large circular eye sockets, and a lower jaw bearing six stitched teeth sits at the center, while four bone ends with rounded knobs extend diagonally from behind it. The eye sockets, teeth gaps, and bone end circles are all pierced through, creating rings of glowing light that contrast with the solid skin bridges holding the design together. Carve the six small tooth gaps before tackling the larger eye socket circles to preserve the jaw structure. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the eyes and brows. Start with the two round eye circles in the center of the skull. Then cut the thin arched eyebrow above each eye; these slivers taper to fine points, so saw slowly and never twist the blade.
- Carve the stitched mouth. Cut the mouth piece below the eyes, working around each vertical tooth bar and the horizontal cross strip as one connected shape. Take the corners in from both sides so the narrow bars release cleanly.
- Cut the skull dome outline. The top of the skull is a long curved strip. Cut it in two or three sections rather than one continuous pass, and let each section fall free before starting the next.
- Cut the four bone outlines. Each crossbone end is a looping outline strip in a corner of the design. Do one bone at a time, keeping the white pumpkin inside each loop untouched; it stays in place.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyKing of the Crypt Pumpkin Stencil
A round skull face wearing a crumbling castle battlement crown tops this ghost pumpkin stencil. Large angry eyes with flame-shaped pupils, a small cracked nose bridge, and a row of jagged teeth fill the circular face, all pierced as cut-throughs while the surrounding ring frame and crown teeth remain as solid pumpkin. The lit jack-o-lantern glows through the eyes and mouth in a fierce scowl. Carve the crown battlements first before cutting the circle frame below, so the narrow wall sections holding the crown have full support while you work.
Beginner-friendlySkull Pumpkin Stencil
Two wide almond-shaped eye sockets with small fang-like lower details, a paired nasal cavity of two thin vertical slots, and a broad rectangular mouth with chunky upper and lower teeth make up this straightforward skull pumpkin stencil. The five main shapes are spread across the face with generous pumpkin skin between them, making this a stable carve. Cut the narrow nasal slots first since they are easiest to lose track of; follow with the eye sockets, and save the wide mouth for last so the pumpkin face remains solid while you finish the upper details.
Beginner-friendlyMean Skull Pumpkin Stencil
Two large angled triangular eyes slash across the upper face of this jack-o-lantern stencil, pointing sharply inward to give the skull an aggressive, furrowed scowl. Below, two narrow rectangular fang-tips drop from the center, and a wide jagged mouth with three upward-pointing teeth stretches across the bottom. All six shapes are cut through individually, leaving solid orange between them to hold the face together. The small central fang-tips are easy to snap, so cut each one from the outer corner inward and avoid side pressure on the blade.
AdvancedSkull and Crossbones Pumpkin Stencil
A skull-and-crossbones design with a feminine twist fills this pumpkin stencil: a small round skull wears a decorative bow on top, its large eye sockets rendered as open flame shapes, while a pair of crossed bones extends to the left and right behind it. The cut-out eye flames and a tiny tooth row are pierced through against the solid skull mass, and four rounded bone ends glow as separate openings at the corners. Cut the small decorative bow petals at the crown before opening the larger eye shapes, so the thin pumpkin wall connecting the bow to the skull doesn't flex and tear.
AdvancedCowboy Skull Pumpkin Stencil
A grinning cowboy-hat skull faces three-quarters toward the viewer, its wide-brimmed hat battered and torn along the crown. Hollow eye sockets and an open jaw with individually delineated upper and lower teeth are pierced through, while the hat brim, cheekbones, and nose cavity form a complex arrangement of solid bridges. Flame wisps curl at the chin. When lit, the teeth row and eye sockets glow against the dark skull mass, creating a hard-boiled undead outlaw look. Cut each tooth gap individually rather than sweeping through the whole row to keep the ridges crisp.
Beginner-friendlyCute Skull Pumpkin Stencil
A cute, stylized skull face looks straight out of this beginner pumpkin stencil, with two large round eye sockets and a small triangular nose cut through, all enclosed in a rounded skull outline broken into arc segments. The lower jaw shows four chunky teeth separated by gaps, and small curved cheekbone accents frame the face. Because the skull outline is split into separate arcs rather than one continuous ring, carve each arc segment individually so the gaps between them stay crisp.





