Similar to This
View all stencils →About this stencil
A classic jack-o'-lantern face with sharply slanted, angled eyes and a wide sinister grin punctuated by two long fangs hanging from the upper lip. The eyes, mouth, and fang gaps are all cut clean through so candlelight pours out of every opening. The fangs stay attached as pointed flaps of pumpkin wall, so an easy tip is to cut the mouth first and shape each fang last with slow, shallow strokes. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateAlmond Eyes and Seven Teeth
A wide, low jack-o'-lantern face with sly almond-shaped eyes, a small triangle nose, and a long jagged mouth packed with alternating square teeth top and bottom. Everything is pierced through, and the horizontal layout suits squat, wide pumpkins. At medium difficulty the tooth row is the main work; cut the mouth's outer outline first, then remove the gaps between teeth one at a time so each block keeps support while you work.
IntermediateAngular Seven-Tooth Grin
A sharp-edged jack-o'-lantern face with slanted triangle eyes, an angular nose, and a wide jagged mouth broken into seven pointed teeth. Every shape is cut straight through the pumpkin wall, making a bright, high-contrast face that reads perfectly from the porch steps. It is a medium pattern because of the many small tooth points, so saw into each corner from both directions instead of twisting the blade to keep the tips sharp.
Beginner-friendlySlanted Eyes and Twin Fangs
A sinister face with narrow slanted eyes, a slim angled nose, and a wide sneering mouth bristling with pointed fangs top and bottom. Eyes, nose, and mouth are pierced clean through, with the fang shapes left as solid teeth jutting into the glowing opening. Even though it rates easy, the fang tips are fragile; cut each tooth from base to point and let the waste fall away instead of pulling it free.
Beginner-friendlySlanted Eyes and Twin Fangs
A wicked jack-o'-lantern with sharply slanted eyes, a small triangle nose, and a curling grin pierced by two long fangs hanging from the upper lip. All the features cut straight through, and the fangs read as solid pumpkin left inside the glowing mouth opening. It is an easy carve overall; just remember the fangs are attached only at the top, so slice along their sides gently and never lever the knife against them.
Expert / ProHanging Pupils and Eight Bays
An elaborate theatrical face with knowing eyes whose pupils hang from the upper lids, framed by ornate teardrop flourishes across the brow and temples, above a huge grin packed with long individual teeth. Dozens of small cut-through openings build the pattern, with slim rind bridges holding every tooth and swirl in place. Number your openings and remove the smallest flourishes first, saving the big mouth bays for last so the web of bridges keeps its strength.
Expert / ProDouble Bars and Zigzag Teeth
An elaborate jack-o'-lantern face built from layered geometry: triangle eyes barred with double rind strips, arched claw-like brows, diamond accents down the cheeks, and a wide zigzag mouth of interlocking teeth flanked by curling flame flourishes. The many openings are cut through around a lattice of thin surviving rind. This expert design demands a sharp fine-tooth saw and a plan: cut from the center outward, finishing the outer flourishes last while the wall is still strong.