Similar to This
View all stencils →About this stencil
A playful winking face with one big round open eye, one crescent-shaped winking eye, and a broad open smile showing two square teeth. All the features are simple pierced openings with plenty of solid pumpkin between them, so the face is sturdy and beginner friendly. For this easy carve, cut the large smile first while the wall is strongest, then finish with the crescent wink, angling your blade slightly outward for a clean curve. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 45-65 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the open eye and wink. Cut both regions marked 1. The large left eye is an uneven oval; the right eye is a low curved wink. Preserve the attached white area beneath the wink and the wide white bridge between the eyes.
- Keep the two upper teeth. Cut region 2 around the two square white teeth hanging from the upper lip. Preserve both attachments and the raised right smile corner. Follow the broad lower curve, supporting the plug before the final cut.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedGoofy Pupils and Twelve Dots
A freckle-faced goofball with lifted eyebrow cuts, big eyes crossed by full-width pupil tabs, a round nose, twelve freckle dots, and a huge open grin with mismatched teeth. The openings are cut through while the pupil bars, teeth, and surrounding freckle rind stay intact. It rates hard because those wide pupil tabs span the entire eye: cut each eye as separate top and bottom windows, drill the freckles with a small round bit, and save the eyebrows for last.
Beginner-friendlyUnequal Eyes and Opposed Teeth
A lovably lopsided face: one huge round eye beside one small one, over a wide wavy smile with a single square tooth poking down and another poking up from opposite sides. Every shape is a cut-through, and the deliberate asymmetry is the whole joke. This easy design forgives wobbly lines since crooked only makes it funnier; just keep the two teeth attached by cutting around them, not across their bases.
IntermediateRound-Eyed Clown With Brows
A cheerful clown face with raised curving brows, big round eyes, a round button nose, small dot cheeks, and a huge sweeping smile. Every feature is a straightforward cut-through opening, and the little cheek dots on each side add extra sparkle at night. At medium difficulty the challenge is spacing: transfer the stencil carefully so the brows sit clear of the eyes, then drill the small dots with a pumpkin drill or apple corer for perfect circles.
Beginner-friendlyRound and Square Eyes
A goofy lopsided face with one big round eye and one square eye, a small triangle nose, and a huge open smile interrupted by two buck teeth hanging from the upper lip. All shapes are cut fully through, and the mismatched eyes do all the comedic work. An easy, forgiving carve for kids and beginners; cut the smile last and leave the two tooth tabs of rind attached so they dangle into the glow.
Beginner-friendlyRound and Triangle Goofy Eyes
One round eye and one sideways triangle eye give this pumpkin its delightfully goofy, mid-wink expression, finished with a huge upswept smile and two square teeth hanging from the upper lip. All shapes cut straight through for a bright, cartoonish glow. It is an easy crowd-pleaser; cut around each square tooth carefully, since they stay attached to the top of the mouth, and round off the smile's corners for extra charm.
IntermediateLovestruck Heart Eyes Face
This lovestruck face beams with two big heart-shaped eyes under curved brows, a wide open smile showing three square teeth, and playful dot dimples on each cheek. All the features are cut through the wall, so the hearts glow brightest and instantly read as the classic heart-eyes expression. Cut the notch at the top of each heart carefully with short strokes, since that little dip is what makes the shape.