Similar pumpkin stencils
View all stencils βAbout this stencil
This free Starstruck Smiler pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. This starstruck face beams with two five-pointed stars for eyes, curved brows arching above them, a wide open grin with tiny teeth, and three round freckles dotting each cheek. All the features are pierced through the wall, and the star eyes are the showpieces. Cut each star from its center out to the points, and drill the six freckles with a small round bit for perfectly matched circles. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 65-95 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 65-95 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the two curved eyebrows. Cut both regions marked 1. Follow the left rising arc and right falling arc, leaving each separate from its star eye. Preserve the narrow white strips beneath them.
- Open both five-point stars. Cut both regions marked 2. Keep all five points on each star and preserve their unequal angles. Work into each corner carefully without extending the cuts into the surrounding shell.
- Cut all six freckles. Cut the six regions marked 3, three on each cheek. Follow their staggered arrangement and unequal sizes. Preserve every separator around the small holes.
- Keep three small upper teeth. Cut region 4 around the three upper square teeth. Preserve their full attachments and the wide gaps between them. Follow the compact rounded smile and support the plug during the final cut.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateLovestruck Heart Eyes Pumpkin Stencil
This lovestruck face beams with two big heart-shaped eyes under curved brows, a wide open smile showing three square teeth, and playful dot dimples on each cheek. All the features are cut through the wall, so the hearts glow brightest and instantly read as the classic heart-eyes expression. Cut the notch at the top of each heart carefully with short strokes, since that little dip is what makes the shape.
IntermediateSmug Smiley Pumpkin Stencil
A winking smiley with one open eye, one curved wink swoosh, a big grin holding a single square tooth, and a cluster of four freckle dots on each cheek. All shapes cut through, and the tiny freckles are what nudge this to medium difficulty. Punch the dots with a drill bit or apple corer before sawing the larger openings, since small circles are far easier while the wall is intact.
IntermediateBeaming Smiley Pumpkin Stencil
A big circular smiley face beams from the pumpkin, drawn with a segmented ring outline, two oval eyes, and a wide upturned smile with curled corners. The ring, eyes, and mouth are all cut through, while small bridges break the circle into sections that keep the face anchored to the shell. Leave every bridge intact until the end so the outline ring stays firmly attached.
AdvancedLove-Struck Emoji Pumpkin Stencil
The heart-eyes emoji comes to life with two big heart-shaped eyes, arched brows, and a wide toothy smile, all surrounded by seventeen small hearts and diamond accents scattered across the shell. Every heart, brow, tooth gap, and diamond is pierced through, so the whole pumpkin twinkles. Carve the large central face first while the shell is strongest, then work outward through the border hearts from biggest to smallest.
Beginner-friendlySunny Smiler Pumpkin Stencil
Two round eyes sit above a broad crescent smile that sweeps almost the full width of the pumpkin, making the friendliest face on the block. All three shapes are simple cut-throughs with no fragile pieces anywhere. It is a perfect first carve: drill or poke start holes in each eye, saw the circles smooth, then cut the long mouth curve in one relaxed pass, keeping the crescent's pointed corners crisp.
Beginner-friendlyCheeky Winker Pumpkin Stencil
A playful winking face with one big round open eye, one crescent-shaped winking eye, and a broad open smile showing two square teeth. All the features are simple pierced openings with plenty of solid pumpkin between them, so the face is sturdy and beginner friendly. For this easy carve, cut the large smile first while the wall is strongest, then finish with the crescent wink, angling your blade slightly outward for a clean curve.





