Similar pumpkin stencils
View all stencils →About this stencil
The Devil in Flames pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. A snarling devil or demon figure dissolves into horizontal flame streaks in this expert pumpkin stencil, the upper body and bared-teeth face rendered in dense interlocking cuts while dozens of thin parallel flame lines trail outward to the right, tapering to points. Lit from inside, the flames read as a cascading burst of light across the pumpkin surface. Cut the face details first, then work along the flame lines from the body toward the outermost tips, always cutting from the thick base of each flame toward its thin pointed end. It makes a fun jack-o'-lantern design for Halloween night. It is rated Expert / Pro. Actual time varies with preparation, pumpkin size and experience. Intricate details and fragile supports need patience. Technique depends on the design; follow its PDF rather than assuming multiple depth layers.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Begin with the face: cut the eye openings and bared-teeth mouth gaps, keeping the small nasal bridge solid.
- Carve the fur or hair detail lines around the skull using short controlled strokes, working outward from the face edge.
- Cut the upper body claw and shoulder fragments next, removing each irregular piece individually.
- Start the flame trails at the body shoulder, cutting each horizontal flame strip from its widest end near the body outward toward its pointed tip.
- Finish the outermost flame tips last; use a fresh blade and cut with the tip angled slightly toward the pumpkin interior so the point stays sharp rather than crumbling.
Tools you'll need
For a expert / pro carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and detail gouges if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Expert / ProTrident Devil Pumpkin Stencil
A stocky cartoon devil crouches in a lunging pose, holding a trident horizontally across his body while lightning bolts crackle at his feet. Horns, pointed ears, and a wide-toothed grin are all rendered in open cutouts, and the overall figure is surrounded by enough white space to read crisply as a lit jack-o-lantern. The three prongs of the trident sit very close together, so cut the two narrow gaps between them with a thin detail blade before removing the larger body sections to keep the surrounding pumpkin from flexing.
Expert / ProFlaming Devil Pumpkin Stencil
A muscular devil figure with curved horns and a snarling face is wreathed in jagged flame tongues that radiate outward from his body. The stencil uses large pierced areas for the flames and the open silhouette around his torso, while thin solid bridges define the horns, facial features, and the clawed hands. When lit, the jack-o-lantern blazes with a crescent of fire around a dark demonic form. Cut the outer flame spikes first so the central figure stays anchored while you work.
Expert / ProHorned Devil Face Pumpkin Stencil
A snarling horned devil face bursts outward in this expert pumpkin stencil, its deeply detailed visage surrounded by wild flame-like hair, pointed ears, and curling scroll accents, while the eyes, nostrils, and sneering mouth with individual teeth are all cut through as fine interior negative spaces. Dozens of flame-fringe cuts radiate from the outer edge, creating a dense, fiery halo effect when lit. Work from the center face features outward toward the flame fringe, so the most delicate outer tips are cut last when you have the steadiest control.
AdvancedTrident Trickster Pumpkin Stencil
A cartoon devil character stands full-body, holding a trident in one hand and sporting a curled pointed tail behind it, with two horns curving above its round head, arched eyebrows, stubby fang teeth, and small cloven-hoof feet visible below its tunic. The scattered cut pieces, including the trident tines, horns, and eyebrow slots, are separated by solid pumpkin bridges that outline each body part clearly when the jack-o-lantern is lit. Cut the three narrow trident tines first since they sit away from the body and are easiest to control while the surrounding pumpkin is still rigid.
AdvancedLittle Devil Pumpkin Stencil
A small cartoonish devil figure with horn nubs, a pointed tail, and a three-pronged trident stands with a mischievous grin on this devil pumpkin stencil, the body and limbs carved as a tight cluster of connected cutouts. The trident tines and the arrowhead tail tip are the narrowest elements in the design. Carve those thin trident prongs and the pointed tail tip before cutting the larger body void, as opening the chest area too early weakens the wall near those delicate outer points.
IntermediateDapper Devil Pumpkin Stencil
A devilish face with two curved horns sprouting from the brow, narrow slanted eyes glaring beneath them, a wide grin studded with square teeth, and a diamond goatee stamped under the chin. Every piece is cut through so the whole sinister face burns bright. A medium carve with lots of payoff; cut the horn tips slowly since their curved points are the thinnest cuts, and finish with the easy diamond chin.