Similar pumpkin stencils
View all stencils →About this stencil
Download the Little Devil pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A small cartoonish devil figure with horn nubs, a pointed tail, and a three-pronged trident stands with a mischievous grin on this devil pumpkin stencil, the body and limbs carved as a tight cluster of connected cutouts. The trident tines and the arrowhead tail tip are the narrowest elements in the design. Carve those thin trident prongs and the pointed tail tip before cutting the larger body void, as opening the chest area too early weakens the wall near those delicate outer points. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Advanced. Estimated time: 90-150 minutes. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 90-150 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the trident tips and tail arrowhead. Start with the three thin trident tines at the upper left and the arrowhead at the tip of the tail on the right. These are the narrowest pieces on the pattern and must be cut while the wall is fully solid.
- Cut the small face pieces. Remove the two small eyes, the crescent nose, and the fanged grin. Cut around each pointed fang on the grin edge carefully; the white gaps between the face pieces must stay intact.
- Cut the horns and brow. Remove the two curved horns at the top and the brow patch between them, sawing into each horn point from both sides.
- Cut the trident shaft and tail segments. Cut the thin diagonal shaft pieces that run through the body and the curved tail segments down the right side. These are long, skinny slots; use the tip of the blade and light pressure.
- Cut the arms and hands. Remove the bent arm on the left with its small fingers and the arm segment on the right, keeping the white strips between arm, shaft, and body intact.
- Release the body and legs last. Finish with the chest wedge, hips, and the two boots. These are the largest plugs; leave a small tab on each until its neighbors are done, then slice the tabs and push each piece out with support.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedTrident Trickster Pumpkin Stencil
A cartoon devil character stands full-body, holding a trident in one hand and sporting a curled pointed tail behind it, with two horns curving above its round head, arched eyebrows, stubby fang teeth, and small cloven-hoof feet visible below its tunic. The scattered cut pieces, including the trident tines, horns, and eyebrow slots, are separated by solid pumpkin bridges that outline each body part clearly when the jack-o-lantern is lit. Cut the three narrow trident tines first since they sit away from the body and are easiest to control while the surrounding pumpkin is still rigid.
IntermediateDapper Devil Pumpkin Stencil
A devilish face with two curved horns sprouting from the brow, narrow slanted eyes glaring beneath them, a wide grin studded with square teeth, and a diamond goatee stamped under the chin. Every piece is cut through so the whole sinister face burns bright. A medium carve with lots of payoff; cut the horn tips slowly since their curved points are the thinnest cuts, and finish with the easy diamond chin.
IntermediateHorned Havoc Pumpkin Stencil
Two curved horns rise from the crown while fierce slanted eyes, each split by a solid bar of rind, glare above a jagged toothy grin. The horns, eyes, nose, and mouth are all pierced through, with the eye bars and pointed teeth left as uncut bridges. On this medium carve, do the eye interiors in two halves around each bar so the thin strip never bends.
Expert / ProTrident Devil Pumpkin Stencil
A stocky cartoon devil crouches in a lunging pose, holding a trident horizontally across his body while lightning bolts crackle at his feet. Horns, pointed ears, and a wide-toothed grin are all rendered in open cutouts, and the overall figure is surrounded by enough white space to read crisply as a lit jack-o-lantern. The three prongs of the trident sit very close together, so cut the two narrow gaps between them with a thin detail blade before removing the larger body sections to keep the surrounding pumpkin from flexing.
Expert / ProFlaming Devil Pumpkin Stencil
A muscular devil figure with curved horns and a snarling face is wreathed in jagged flame tongues that radiate outward from his body. The stencil uses large pierced areas for the flames and the open silhouette around his torso, while thin solid bridges define the horns, facial features, and the clawed hands. When lit, the jack-o-lantern blazes with a crescent of fire around a dark demonic form. Cut the outer flame spikes first so the central figure stays anchored while you work.
Expert / ProDevil in Flames Pumpkin Stencil
A snarling devil or demon figure dissolves into horizontal flame streaks in this expert pumpkin stencil, the upper body and bared-teeth face rendered in dense interlocking cuts while dozens of thin parallel flame lines trail outward to the right, tapering to points. Lit from inside, the flames read as a cascading burst of light across the pumpkin surface. Cut the face details first, then work along the flame lines from the body toward the outermost tips, always cutting from the thick base of each flame toward its thin pointed end.