Similar to This
View all stencils →About this stencil
Bold block lettering spells out I, a big heart, and KY across two rows, declaring love for the Bluegrass State in glowing letters. Each letter and the heart are cut fully through, and the chunky serif strokes are wide enough to saw comfortably even for newer carvers. Print at full size and transfer carefully so the letters stay aligned, then cut each stroke from the inside corners outward. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 40-65 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the upper I. Cut region 1 around its slightly tilted serifs and narrow tall stem. Preserve the white strip between the upper and lower rows.
- Trace the broad heart. Cut region 2 along its shallow center cleft, unequal lobes and downward point. Keep the heart separate from the upper I and lower Y.
- Open the KY initials. Cut both regions marked 3. Follow the K diagonal arms and the Y fork, preserving their rounded top and bottom serifs. Keep all open letter recesses and the white strip between K and Y intact.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlyFlorida Heart Lettering
A bold I sits beside a big full heart, with the letters F and L stacked underneath, spelling out Florida love in thick serif type. The heart and all three letters are cut completely through for a bright, readable message after dark. This easy carve suits first-time letter cutters; keep the serifs slightly chunky rather than trimming them thin, and cut the heart's inner notch before removing the rest of the shape.
Beginner-friendlyMississippi Heart Lettering
This hometown tribute stacks I heart on the top line and MS below in thick block letters, with a plump heart doing the talking. Each letter and the heart are pierced as separate bold shapes with plenty of shell between them, keeping the wall strong. For this easy design, cut the S from the center outward in two hooked passes so its curves stay even, then finish with the heart.
Beginner-friendlyMichigan Heart Lettering
A big I, a solid heart, and the letters MI glow in two stacked rows, spelling out hometown pride for the Great Lakes State. Every letter and the heart are cut fully through, with thick serif strokes that hold up well in a real pumpkin wall. It is an easy carve for tailgates and porch season; transfer the letters with a poked outline so the baselines stay level.
Beginner-friendlyWyoming Heart Lettering
Show your Wyoming pride with bold block lettering: a big capital I and a chunky heart across the top row, with large W and Y letters beneath. Each letter and the heart are cut fully through, so the message glows like a marquee at night. An easy lettering carve with one classic tip: tape the stencil securely and cut slightly inside the traced lines, since letters look cleaner when the strokes stay uniform in width.
Beginner-friendlyNorth Carolina Heart Lettering
A bold I-heart-NC design with a chunky letter I beside a big solid heart on the top row and the letters N and C below, echoing the famous love-your-city logo. All four elements are cut fully through in thick slab-serif strokes that glow brightly and stay sturdy. An easy lettering carve; trace the letters carefully when transferring, since straight, even strokes are what make text look sharp.
Beginner-friendlyTexas Heart Lettering
Big serif letters read I, heart, T, X, stacked in two rows with a bold heart doing the talking. Each character is its own clean cut-through opening, making a Lone Star porch statement you can finish in one sitting. Keep the letter strokes at least a finger wide as you carve; the thin serifs are the only place this easy pattern can get fussy.