Similar to This
View all stencils →About this stencil
A large crescent moon anchors the center of the pumpkin while five stars and a sprinkling of small round holes orbit around it. Every element is pierced through the wall, so the finished carve reads as a glowing night sky from across the yard. Carve the crescent first since it is the largest opening, then add the stars, sawing each point from the tip toward the center for clean corners. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 70-100 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Open the five round holes. Cut all five regions marked 1 above, beside and below the star group. Keep the uneven circle sizes and their original scattered positions.
- Trace the five unequal stars. Cut the five regions marked 2, keeping two above the crescent, one to its right and two below. Follow every individual five-point outline and preserve each inward white notch.
- Finish the central crescent. Cut region 3 along the broad left edge and open right curve. Leave the inward white area connected to the outer shell. Preserve the narrow gap below the upper-right star and support both crescent tips.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateSeven Stars in a Winding Trail
Seven five-pointed stars of varying sizes wind down the pumpkin in a gentle S-curve, like a constellation trailing across the night sky. Each star is a full cut-through opening, so the finished lantern twinkles from every angle. Star points are where beginners slip, so cut each arm from the outer tip inward toward the center and let the cuts meet, which keeps all five points sharp on every star.
IntermediateRinged Planet and Four Stars
A big ringed planet dominates the middle of the design, its ring sweeping behind the glowing globe as two side wings, surrounded by four pointed stars and a few round dot holes. The planet, ring segments, and stars are all cut through for a bright cosmic display. A great medium pick for space-obsessed kids and tweens; carve the planet circle first, then add the ring wings so the thin rind gap between them stays even.
IntermediateThree Crescents and Five Stars
Three crescent moons stack down the center of the pumpkin, each curving the same direction, with five little five-point stars scattered around them like a night sky. Every moon and star is cut cleanly through, so the whole face twinkles once the candle is in. A pleasant medium carve; punch the small stars first with a detail saw, then cut each crescent from the inner curve outward to keep the horn tips sharp.
Beginner-friendlyMortar and Tilted Pestle
A footed mortar bowl with a tilted pestle resting across its rim, the timeless symbol of pharmacists and potion mixers alike. The bowl, base, and pestle are carved as one connected cutout so the whole emblem glows in a single bright shape. An easy pattern with mostly smooth curves; keep the narrow bridge where the pestle meets the bowl rim intact, and this one is done in a single relaxed sitting.
Beginner-friendlyRocket Flame and Three Dots
A chunky rocket blasts diagonally upward with a flickering flame bursting from its tail and three round dots floating alongside like distant planets. The rocket body, fins, flame, and dots are each cut fully through, and the gap between the ship and its flame creates a fun sense of motion. Cut the flame's wavy points carefully with short strokes, since those narrow tips are the most fragile part.
Beginner-friendlyCrescent and Four Stars
A thick crescent moon anchors the left side of the pumpkin while four five-pointed stars drift across the remaining space. All five elements are clean cut-through openings, so the pumpkin becomes a night-sky lantern with the untouched rind acting as the dark sky between them. It is an easy carve overall; the only care point is the star tips, so cut each star point-to-center in single strokes rather than trying to steer around the whole outline at once.