Similar to This
View all stencils →About this stencil
A large crescent moon anchors the center while six diamond sparkles and a scattering of small round dots twinkle around it, turning the whole pumpkin into a patch of night sky. Every moon, diamond, and dot is a separate pierced opening, so the pattern wraps light in all directions. Carve the crescent first, then the diamonds from largest to smallest, using a drill or apple corer for the tiny circles. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 75-110 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the eight accent holes. Open all eight regions marked 1 at their scattered heights. Preserve the flattened top and bottom ovals and the smaller side holes. The blue exterior color is not part of the transfer pattern.
- Trace the six diamond sparkles. Cut every region marked 2, following the curved sides and unequal tips of each four-point sparkle. Keep the large right sparkle separate from the small inner one and all neighboring dots.
- Finish the broad low crescent. Cut region 3 around the large crescent at the lower left. Retain its open right side and the white shell beside both tips. Support the broad curved plug before releasing its final edge.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateRinged Planet and Four Stars
A big ringed planet dominates the middle of the design, its ring sweeping behind the glowing globe as two side wings, surrounded by four pointed stars and a few round dot holes. The planet, ring segments, and stars are all cut through for a bright cosmic display. A great medium pick for space-obsessed kids and tweens; carve the planet circle first, then add the ring wings so the thin rind gap between them stays even.
IntermediateFour Trailing Stars and Dots
Four five-pointed stars in descending sizes sweep diagonally across the pumpkin, joined by a few small round dots that read like distant sparkles. Each star and dot is cut fully through, so the cluster twinkles convincingly once a candle goes in. The star points are what make this a medium carve; drill a starter hole at the center of each star and always saw from the middle out toward each tip to keep the points sharp.
Expert / ProGalaxy with Three Planets
A sweeping spiral galaxy wraps across the entire pumpkin face, its curved arms shaved in graduated depths so the core glows brightest, while three ringed planets and scattered stars orbit the edges in raised relief. Nothing is pierced; every effect comes from continuous-wall shading at different thicknesses. Expert-level patience pays off here: establish the spiral arms as broad shallow bands first, then deepen toward the center in passes to build the luminous gradient.
Expert / ProSpiral Galaxy and Four Stars
A sweeping spiral galaxy with two luminous arms curling around a bright core, surrounded by four-point stars and a scatter of small stardust dots. The entire scene is skin-shave work with no pierced holes: the arms are shaved wide and shallow while the dots and stars are picked out individually. An expert pattern because of its long tapering curves; keep your gouge moving in smooth continuous strokes along each arm.
Beginner-friendlyPlus Above Four Windows
A bold medical plus sign glows at the top while a row of small square windows and a larger doorway below turn the pumpkin into a tiny lit-up hospital. Every shape cuts straight through, and the straight-edged squares make this an easy, tidy carve, perfect for healthcare workers or a first-responder porch display. Score each square with a ruler before cutting so the windows line up in a neat row.
IntermediateEight Hearts and Eight Dots
Eight hearts arranged in a ring, each one pointing outward like petals on a wreath, with eight small round dots glowing in the gaps between them; the center of the pumpkin stays solid. Every heart and dot is cut through, turning the whole design into a radiant circular pattern. A medium carve that rewards accuracy: trace the stencil carefully so the ring stays even, and drill the dots before sawing the hearts around them.