Similar pumpkin stencils
View all stencils →About this stencil
This free Portal Spiral pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. Three swirling ribbons frame floating stepping stones. Print this cosmic portal pumpkin stencil with two-depth shading and individual scraping steps. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 60 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
Print both pages at 100% / Actual Size and check the one-inch ruler. The artwork box is 7 x 7 inches.
Carving key
White / K: leave skin and flesh intact. Light gray / 1: shallow scrape for a softer glow. Dark gray / 2: deeper scrape for brighter light. Never cut through. These are relative depth levels, not millimeters.
1. Trace the open portal
Transfer all three ribbon contours and the three stones. Preserve the large white central opening as untouched skin.
2. Start with shallow rims
Scrape the light-gray ribbon edges and stone tops in thin passes. Keep these surfaces broad and even.
3. Deepen the inner currents
Scrape the darker ribbon cores and stone faces more deeply. Use the gray boundary to separate the two light levels.
4. Balance the floating stones
Check the smallest stone with an LED before deepening it. Maintain the wall beneath every stone and the ribbon tips.
Previews are simulated. This design has not been physically test-carved. Brightness depends on remaining wall thickness.
Related stencils
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateMeteor Mender Pumpkin Stencil
A space repair hero wears a magnetic rescue glove. Print this original shaded pumpkin stencil with a two-depth key and detailed carving guide.
IntermediateDream Big Pumpkin Stencil
Reach for the stars with bold Dream Big lettering and a soaring figure. Print the numbered pumpkin stencil and follow the two-page carving guide.
IntermediateTeardrop Eyes Alien Pumpkin Stencil
Two enormous teardrop eyes dominate this quirky alien mug, floating above a tiny triangle nose and a crooked grin made of separate oval mouth slots, with three little stars sprinkled around the face. Every eye, slot, and star is cut through, giving the pumpkin a goofy otherworldly stare. At medium difficulty, carve the huge eyes last since removing that much wall weakens the face, and keep the small oval grin slots evenly spaced.
IntermediateMoonbeam Sparkle Pumpkin Stencil
A large crescent moon anchors the center while six diamond sparkles and a scattering of small round dots twinkle around it, turning the whole pumpkin into a patch of night sky. Every moon, diamond, and dot is a separate pierced opening, so the pattern wraps light in all directions. Carve the crescent first, then the diamonds from largest to smallest, using a drill or apple corer for the tiny circles.
IntermediateCosmic Pinwheel Pumpkin Stencil
Five curved galaxy arms swirl around a solid dark core, each tapered blade cut fully through so the design spins like a glowing cosmic pinwheel, with five small round star holes drilled between the arms. The center circle stays as untouched shell, anchored by the skin between the arms. At medium difficulty, the keys are the tapered arm tips; saw from the wide end of each arm toward its point, and drill the star holes before cutting the arms nearby.
IntermediateStardust Trail Pumpkin Stencil
Seven five-pointed stars of varying sizes wind down the pumpkin in a gentle S-curve, like a constellation trailing across the night sky. Each star is a full cut-through opening, so the finished lantern twinkles from every angle. Star points are where beginners slip, so cut each arm from the outer tip inward toward the center and let the cuts meet, which keeps all five points sharp on every star.