Similar pumpkin stencils
View all stencils →About this stencil
The Puking Jack-o-Lantern pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. This Halloween pumpkin stencil shows a scowling jack-o-lantern face above a wide open mouth with a round bowl shape inside, from which a blob of chunky dripping gunk spills downward in an irregular mass. Narrow slash-shaped eyes and angular brow lines above the mouth convey disgust, while the dripping mass below is a single large pierced area with ragged edges. Cut the small eye and brow slashes first, then tackle the wide drip outline last, since it spans most of the lower pumpkin and removing it early would destabilize the wall for the detail work above. It makes a fun jack-o'-lantern design for Halloween night. It is rated Beginner-friendly. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the angry brow slashes. Open the six tapered slash marks, three above each side of the face. Cut toward each fine point from both directions; these thin wedges snap if the blade twists.
- Carve the small nose. Cut the little curved nose shape at the center between the slashes.
- Open the mouth rim. Cut the wide oval above the drip. The wavy white strip between the oval and the gunk below it must stay attached; it separates the lip from the spill.
- Release the big drip last. The chunky dripping mass is the largest piece and spans most of the lower pumpkin. Cut its ragged outline, working each drip lobe at the bottom individually, and leave a small section on one side attached until the end. Support the heavy plug with your hand and push it out from inside.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyCrooked Scowler Pumpkin Stencil
Two steeply sloping eyes scowl above a crooked grin holding two chunky square teeth, one notched into the top lip and one into the bottom. The eyes and mouth are pierced through, with the blocky teeth left as shell inside the mouth opening. Cut the outline of each tooth before clearing the rest of the mouth, and the asymmetry of the design means small wobbles only add to the attitude.
Beginner-friendlyThe Grand Grump Pumpkin Stencil
Two fierce slanted triangle eyes glare above a deep downturned crescent frown, turning the whole pumpkin into one magnificent scowl. All three shapes are clean cut-throughs, with the eyes angled sharply inward to sell the anger. This easy carve lives or dies on those angles: keep the inner eye points low and sharp, and cut the frown in one steady arc so the grump reads clearly from across the street.
Beginner-friendlyGoogly Grin Pumpkin Stencil
One round eye and one sideways triangle eye give this pumpkin its delightfully goofy, mid-wink expression, finished with a huge upswept smile and two square teeth hanging from the upper lip. All shapes cut straight through for a bright, cartoonish glow. It is an easy crowd-pleaser; cut around each square tooth carefully, since they stay attached to the top of the mouth, and round off the smile's corners for extra charm.
Beginner-friendlyHollow Eyes Pumpkin Stencil
Two big blank circle eyes stare out beneath short angled brow slits, while the wide mouth is broken into six upright rectangular slots that glow like stitched or fenced-off teeth. Everything is cut through, and the plain round eyes with no pupils give the face its unsettling, vacant charm. The vertical mouth bars keep this an easy carve; cut every slot top-down in the same direction so the strips between them stay straight and even.
Beginner-friendlyLittle Jack Pumpkin Stencil
Sized for small pumpkins, this friendly face uses two triangle eyes, a tiny triangle nose, and a rectangular mouth with two square teeth notched into the top edge. All openings cut straight through, and the compact layout keeps every feature close together so it reads clearly on a little gourd. On thin-walled mini pumpkins, use a fine serrated blade and light pressure to avoid splitting the shell between cuts.
Beginner-friendlyOld Irish Lantern Pumpkin Stencil
A nod to the original Irish lanterns: a simple startled face with two triangle eyes and a small arched mouth, designed to suit a turnip, rutabaga, or small pale pumpkin. All three openings cut straight through the wall. Root vegetables are much denser than pumpkins, so hollow the inside generously first and use short, firm saw strokes; on a regular pumpkin this carves in minutes.