Similar pumpkin stencils
View all stencils →About this stencil
This free Skeleton Ghost pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A skeletal ghost charges forward with clawed hands outstretched, its skull face showing hollow eyes and a jagged open mouth, the lower body dissolving into flowing tattered shroud wisps in this hard pumpkin stencil. The cut pieces include the eye and mouth openings in the skull, the gaps between the outstretched claw fingers, and several large void areas within the billowing shroud body. The thin strips between the claw fingers are fragile; cut each finger gap fully before moving to the large shroud openings below. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Advanced. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Scoop walls to 3/4 inch, especially in the claw and skull areas.
- Transfer the full design including every finger-gap line and skull feature.
- Cut the eye sockets and jagged mouth in the skull first while the head is fully intact.
- Carve each finger-gap slot in both clawed hands before moving lower.
- Work down through the upper shroud void areas, cutting each opening individually.
- Open the large lower shroud wisps last; they are the biggest cuts and removing them early would let the pumpkin flex during the delicate skull and claw work.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedLittle Boo Pumpkin Stencil
A wide-eyed little ghost with curled hands and a wavy hem floats in front of a big round glow, its startled O-shaped mouth mid-boo. The circular background is cut through around the ghost, so the figure stays as connected rind while light floods the disc behind it. Those slim connector bridges at the hands and hem are the whole design; cut the large background sections first and save every bridge for careful final passes.
AdvancedGhost with BOO Balloon Pumpkin Stencil
A small ghost holds a round balloon with the word BOO written on it in this hard ghost pumpkin stencil, the balloon rendered as a thin open circle with letter cutouts and the ghost below it as a rounded blob with oval eyes and a wavy hemline. Both figures are outlined by thin curved lines that remain solid orange, so when lit the design shows glowing ribbons of light tracing the balloon string, the ghost body, and the BOO lettering. The string connecting the balloon to the ghost's hand is a single narrow line that must be cut last to keep the two halves of the stencil from shifting apart mid-carve.
AdvancedSkeletal Ghost Pumpkin Stencil
A skeletal ghost figure with a domed, skull-like head, jagged mouth slits, and broad swept wings dominates this pumpkin stencil. The design carves as widely spaced curved pierce-through sections that fan across both sides, leaving bold orange bridges to define the creature's torso and face. Lit from inside, the jack-o-lantern reads as a dark specter bursting outward. Cut the inner face details first before tackling the large wing panels so shifting your grip doesn't crack the delicate center column.
AdvancedGhost Reaper Pumpkin Stencil
A faceless hooded ghost figure clutching a large scythe stands amid swirling ground-level mist and gnarled branch tendrils in this hard ghost pumpkin stencil, the entire composition built from one connected silhouette with the robe edges and mist tendrils forming narrow cut points. When lit, the reaper-ghost and the curling ground fog glow together as a single haunting shape. Cut the thin mist tendrils at the base and the ragged robe hem first, then work upward to the broader robe body and the diagonal scythe shaft.
AdvancedFriendly Ghost Pumpkin Stencil
A cheerful, cartoonish ghost with a round pudgy body, wide grinning face with crinkled eyes and rosy cheeks, and wavy trailing edges floats center-stage in this ghost pumpkin stencil. The ghost's body is a network of flowing curved solid lines, the outline, the cheek arcs, the eye detail curls, set against cut-through areas that form the glow around the figure. Wispy curl accents appear on both sides. The crinkle details inside the eyes and the small cheek curves are the narrowest solid bridges; cut those first before removing any of the surrounding open areas.
AdvancedTombstone with Ghost Pumpkin Stencil
A weathered tombstone with a cross relief, set inside a crumbling rectangular frame with broken corners, forms the centerpiece of this pumpkin stencil. A wispy ghost flame rises from the lower left and a skeletal hand or root tendril emerges from the lower right. The cross and tombstone body stay solid while the frame edges, ghost flame curls, and surrounding areas are cut through. Cut the looping ghost-flame curls on the lower left before removing the wide rectangular frame opening, so those thin curving lines have maximum wall support.