Similar to This
View all stencils →About this stencil
An alien face with a wide oval cranium fills this pumpkin stencil, featuring two large bulging almond-shaped eyes with small hooked inner corners, a two-dot nose, a curved smile, and a rounded forehead band rendered as arcing cut-through lines. The eye shapes and facial features are each separate pierces, while the outer oval head outline is also cut away, framing everything in open light. The narrow forehead arc is the most fragile element, so score it fully before pushing through to avoid it snapping midway. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateTeardrop Eyes and Three Stars
Two enormous teardrop eyes dominate this quirky alien mug, floating above a tiny triangle nose and a crooked grin made of separate oval mouth slots, with three little stars sprinkled around the face. Every eye, slot, and star is cut through, giving the pumpkin a goofy otherworldly stare. At medium difficulty, carve the huge eyes last since removing that much wall weakens the face, and keep the small oval grin slots evenly spaced.
IntermediateThree Eyes and Rounded Teeth
Three round eyes line up across the brow of this cheerful monster, above a wide grinning mouth with four rounded teeth hanging from the top lip and a small diamond accent cut on each cheek. The eyes, diamonds, and mouth are cut through, with the teeth left attached to the upper mouth edge. At medium difficulty, the main care point is those hanging teeth: cut around each one gently, and try it on a green or warty pumpkin for extra monster energy.
IntermediateThree Eyes and Four Teeth
Three round eyes of different sizes line up above a small rectangular nose and a wavy grin broken by four square teeth, giving this mutant jack-o'-lantern a delightfully goofy personality. The eyes, nose, and mouth are all cut through, with the teeth left as tabs, and tiny freckle dots may be etched shallow on the cheeks. A medium carve mainly for tooth care; cut into the grin from between the teeth so each square tab keeps its corners.
Beginner-friendlyThree Eyes and Wide Oval Mouth
A delightfully weird mutant face with three round eyes arranged in a triangle above one huge wide oval mouth. All four shapes are pierced through, and the extra eye instantly turns an ordinary pumpkin into a little alien visitor. This is an easy carve with no fragile parts; leave at least an inch of rind between the eyes and the mouth rim so the bridge stays strong.
IntermediateSmiling Oval Alien Face
A big-eyed alien stares out from a smooth oval head, framed by a bold outline band that arcs over the brow. The huge almond eyes, brow lines, nostril dots, mouth, and head outline are all pierced through, with small connecting tabs holding the face pieces to the shell. Do not cut those tabs: the little bridges are what keep the eyes and outline from collapsing inward.
AdvancedUFO Flying Saucer Pumpkin Stencil
A cartoon flying saucer floats in this hard-difficulty pumpkin stencil, with a domed cockpit at the top showing a simple ghost-like alien face inside. A wide flattened disc body below features a row of oval porthole cutouts around its rim and sweeping curved rings beneath. The alien inside the dome and the porthole ovals are each separate pierced shapes. Cut the dome interior and the alien face details before opening the porthole ovals around the rim, so the dome remains attached and stable while you navigate the narrow disc body.