Similar to This
View all stencils →About this stencil
Three round eyes line up across the brow of this cheerful monster, above a wide grinning mouth with four rounded teeth hanging from the top lip and a small diamond accent cut on each cheek. The eyes, diamonds, and mouth are cut through, with the teeth left attached to the upper mouth edge. At medium difficulty, the main care point is those hanging teeth: cut around each one gently, and try it on a green or warty pumpkin for extra monster energy. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateThree Eyes and Four Teeth
Three round eyes of different sizes line up above a small rectangular nose and a wavy grin broken by four square teeth, giving this mutant jack-o'-lantern a delightfully goofy personality. The eyes, nose, and mouth are all cut through, with the teeth left as tabs, and tiny freckle dots may be etched shallow on the cheeks. A medium carve mainly for tooth care; cut into the grin from between the teeth so each square tab keeps its corners.
Beginner-friendlyThree Eyes and Wide Oval Mouth
A delightfully weird mutant face with three round eyes arranged in a triangle above one huge wide oval mouth. All four shapes are pierced through, and the extra eye instantly turns an ordinary pumpkin into a little alien visitor. This is an easy carve with no fragile parts; leave at least an inch of rind between the eyes and the mouth rim so the bridge stays strong.
IntermediateOne-Eye Arched-Brow Smile
A single giant eye dominates this friendly monster face, with a dark round pupil left in place at its center and a curved brow arched above. Below, a huge grin sweeps ear to ear with pointed dimples at each corner. The eye ring, brow, and smile are cut through while the pupil stays as an island of shell, which is what earns the medium rating; anchor that pupil with a toothpick from behind if it feels loose.
AdvancedGoofy Pupils and Twelve Dots
A freckle-faced goofball with lifted eyebrow cuts, big eyes crossed by full-width pupil tabs, a round nose, twelve freckle dots, and a huge open grin with mismatched teeth. The openings are cut through while the pupil bars, teeth, and surrounding freckle rind stay intact. It rates hard because those wide pupil tabs span the entire eye: cut each eye as separate top and bottom windows, drill the freckles with a small round bit, and save the eyebrows for last.
IntermediateCyclops Eye and Five Teeth
A goofy cyclops with one giant round eye under a curly brow, a small triangle nose, freckle dots on each cheek, and a huge laughing mouth with five stubby teeth. The features are cut through, and the pupil stays in place as an attached tab hanging inside the enormous eye. That pupil bridge is the medium-level test; cut both sides of the tab before freeing the rest of the eye circle.
IntermediateCrossed Eyes and Buck Teeth
Huge crossed googly eyes sit under raised brow slots while a gaping oval mouth shows off two goofy buck teeth, with freckle dots on each cheek. The eyes, brows, mouth, and dots are all pierced through, and the dark pupils and teeth are rind left attached inside the openings. Those attached pupils and teeth are the tricky bit; cut around them slowly and leave their connecting bridges generously wide.