Similar pumpkin stencils
View all stencils βAbout this stencil
This free Snowcap Peaks and Moon pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A wide arched window is carved through the pumpkin with three mountain peaks left standing in dark silhouette, while a full moon glows from a separate round opening above. The sky area around the peaks gets cut away and small snowcap notches pierce the summits, so light outlines the whole range. Keep the peak silhouettes attached at the base as you saw the sky sections, since they anchor the entire scene. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 65-90 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 65-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Open the separate moon. Cut region 1 around the tilted round moon at the upper right. Preserve the white gap separating it from the broad arched sky opening.
- Carve the three notched snowcaps. Cut the three regions marked 2 inside the peaks. Preserve each white lower notch and the thick white mountain sides; these small openings must remain separate from the sky.
- Trace the sky above the peaks. Cut region 3 along the broad outer arch and around the three retained white peaks. Follow the tall center peak and two shorter side peaks. Keep the mountain mass connected to the full white base.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateSunny Bloom Pumpkin Stencil
Eight oval petals radiate from a dotted center like a stylized sunflower, with three small seed holes in the middle and a leafy stem opening anchoring the bloom below. Each petal is a pierced oval, and the skin spokes left between them hold the flower together while letting light pour through. Cut opposite petals in pairs, top then bottom, left then right, so the spokes never take uneven strain.
IntermediateTeacher's Apple Pumpkin Stencil
A plump apple with a stem and single leaf glows at the front, trailed by a diagonal line of four round holes like tumbling seeds. The apple body, leaf, and dots are all pierced through, with the stem notch left as dark shell between them. A great pick for classrooms and teacher gifts; punch the four small holes with a corer first, then saw the apple outline in slow curves.
IntermediateModern Mosaic Pumpkin Stencil
Nine triangles in alternating sizes form a tidy three-by-three grid, with six small round dots tucked into the gaps between rows. Each triangle and dot is cut straight through, producing a clean modern lantern that glows like patterned tilework. This medium design is all about alignment, so tape the template securely, transfer every corner point before cutting, and carve the triangles row by row to keep the grid looking sharp and even.
IntermediateSunset Surf Pumpkin Stencil
A half-sun sets over two rows of curling surf, six stylized waves in all, with a chunky starfish tucked at the end of the bottom row. Each wave curl, the sun, and the starfish are individual cut-through openings separated by healthy strips of skin. For a medium carve like this, work top row first and keep the skin bridges between waves at least finger-width so the pattern stays strong through the whole session.
IntermediateComet Chaser Pumpkin Stencil
A five-pointed star streaks diagonally across the pumpkin with four curved trails tapering away behind it, like a comet caught mid-flight. The star and each sweeping trail are cut fully through, with strips of rind left between the trails to keep the motion lines distinct. On this medium carve, the tapering trail tips are the tricky spots: cut each trail from its wide end toward the point and stop just short, finishing the tip with a single small stab cut.
IntermediateLaurel Wreath Glow Pumpkin Stencil
Fifteen almond-shaped leaves sweep upward in two mirrored arcs, curving around the pumpkin's face like a laurel wreath opening toward the stem. Each leaf is cut fully through, so the whole design becomes an elegant pierced lantern with no face at all. Alternate sides as you cut, removing one leaf on the left and then its mirror on the right, to keep the wall's strength balanced throughout.





