Similar pumpkin stencils
View all stencils βAbout this stencil
This free Sunny Bloom pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. Eight oval petals radiate from a dotted center like a stylized sunflower, with three small seed holes in the middle and a leafy stem opening anchoring the bloom below. Each petal is a pierced oval, and the skin spokes left between them hold the flower together while letting light pour through. Cut opposite petals in pairs, top then bottom, left then right, so the spokes never take uneven strain. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 55-85 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 55-85 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Open the three unequal seed holes. Cut the three regions marked 1 in the retained center. Keep the upper and right holes smaller than the lower one, with every white gap intact.
- Cut the five upper and side petals. Cut all five regions marked 2: one upright top petal, two diagonal upper petals and two broad side petals. Preserve their different lengths and the thick white connections to the center.
- Open the three lower petals. Cut all three regions marked 3. Follow the two diagonal petals and the long upright bottom petal. Keep each opening separate from the center and the pointed leaves below.
- Trace both pointed leaves. Cut both regions marked 4 at the base. Keep their inward-pointing lower ends and long sweeping outside curves. Preserve the white center stem and the full gap beneath the lowest petal.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateGolden Sunflower Pumpkin Stencil
A tall sunflower blooms across the whole pumpkin face, with eleven glowing petals radiating around a dark seed disc dotted with tiny pinprick holes, plus a straight stem and two leaves below. The petals, stem, and leaves are shaved to the flesh rather than pierced, while the seed dots are drilled through for sparkle. For this medium shading design, etch all the petal outlines first, then peel each petal evenly and finish by drilling the seed dots in a loose spiral.
IntermediateOak Leaf Tumble Pumpkin Stencil
Two oak leaves of different sizes drift diagonally across the pumpkin, their lobed edges captured in crisp detail. Both leaves are cut fully through the wall, so each one glows like a lantern-lit leaf caught mid-fall. This medium design's challenge is the wavy lobed outline, so use a fine-tooth saw and pivot at every lobe notch, removing each leaf in two or three pieces instead of forcing out one large chunk.
IntermediateFive Petal Flower
A five petal flower with slender veins radiating from a round center fills the front of the pumpkin. Nothing is pierced; you shave away only the skin inside each petal and the center disc so the flesh glows softly while the wall stays solid. Use a loop tool and keep the shaving depth even across all five petals so the whole bloom lights at the same brightness.
Beginner-friendlyBroad Cap Mushroom
A single broad-capped mushroom with a sturdy stem glows from the center of the pumpkin in this cozy woodland design. The whole mushroom is removed as one connected cutout, cap and stem together, so there are no fragile bridges to protect. That makes it a great easy project for porch-step decorating; cut the smooth dome of the cap in one continuous pass, then square off the stem base last for a clean silhouette.
AdvancedHarvest Sunflower Pumpkin Stencil
A sixteen-petal sunflower blooms across the whole face of the pumpkin, complete with a dotted seed head, layered leaves, and a curving stem. This is a skin-shave design: you peel the skin inside every petal and leaf while leaving orange outlines and vein lines untouched, so no light shines through. Sharpen your tools before starting and shave the big petals in long strokes from base to tip for smooth, even texture.
Beginner-friendlyBroad Autumn Leaf
A single broad maple-style leaf glows from the pumpkin's face, its rounded lobes and short stem cut fully through as one connected opening. The design leans seasonal rather than spooky, making it a lovely choice for fall porches from October through Thanksgiving. As an easy one-piece cutout, just poke transfer dots along the lobed outline, saw slowly around each curve, and push the waste piece out from inside in a single pop.





