Similar to This
View all stencils →About this stencil
A five petal flower with slender veins radiating from a round center fills the front of the pumpkin. Nothing is pierced; you shave away only the skin inside each petal and the center disc so the flesh glows softly while the wall stays solid. Use a loop tool and keep the shaving depth even across all five petals so the whole bloom lights at the same brightness. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 90-120 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Expose petals and center. Remove the skin and scrape shallowly across all gray regions. Preserve every white streak, the white ring around the center and the gaps between petals. The slender white streaks remain raised rind.
- Make the petals glow. Deepen the five dark-gray petal areas marked 2. Work around the retained radial streaks with a narrow scraper. Leave the light-gray outer rims shallow and never cut through the pumpkin wall.
- Add the center texture. Deepen the six small dark-gray seed circles inside the center. They are intentionally unnumbered to keep the shapes readable. Leave the light-gray center shallow and the white outer ring untouched; check the illumination with an LED.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateEight Petals and Three Seeds
Eight oval petals radiate from a dotted center like a stylized sunflower, with three small seed holes in the middle and a leafy stem opening anchoring the bloom below. Each petal is a pierced oval, and the skin spokes left between them hold the flower together while letting light pour through. Cut opposite petals in pairs, top then bottom, left then right, so the spokes never take uneven strain.
IntermediateEight Petals with Leaf Pair
Eight almond-shaped petals radiate around a solid center in this graceful flower design, with a pair of pointed leaves below and small accent holes dotting each side like falling seeds. All the petals, leaves, and dots are pierced through while the round flower center stays intact, held by the uncut spokes between petals. For this medium carve, cut opposite petals in pairs as you work around the circle so pressure stays balanced and the center never loosens.
Beginner-friendlyBroad Cap Mushroom
A single broad-capped mushroom with a sturdy stem glows from the center of the pumpkin in this cozy woodland design. The whole mushroom is removed as one connected cutout, cap and stem together, so there are no fragile bridges to protect. That makes it a great easy project for porch-step decorating; cut the smooth dome of the cap in one continuous pass, then square off the stem base last for a clean silhouette.
Beginner-friendlySimple Daisy Flower
A cheerful five-petal daisy with a round center, sized to fill the front of a medium pumpkin. Nothing is pierced through: you shave the skin off each petal and the center circle so they glow softly while the outlines stay as untouched rind. Because this is an easy shading design, scrape each petal to an even depth of about half the wall thickness so all five light up with the same warm tone.
Expert / ProFour Woodland Toadstools
Four spotted woodland toadstools cluster among curling leaves and grasses, carved in deep relief so the caps, gills, and stems stand out from the shell in true sculptural layers. Nothing is pierced; the design is built entirely by shaving and sculpting the wall to different depths, with the tall center mushroom's gilled underside as the showpiece. Rough out the deepest background first, then refine the gill lines last with a V-gouge while the ridges are still thick.
Expert / ProWoodland Toadstool Relief
An enchanted cluster of spotted toadstools carved in deep relief: one grand mushroom with a striped, gilled underside towers over smaller caps, ribbed stems, and leafy ground cover below. There are no pierced holes; the whole scene is sculpted by shaving the wall to different depths so light glows warmest under the big cap. This expert design rewards planning, so rough out the major cap shapes first and save the fine gill lines and spots for last.