Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Simple Daisy Flower pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A cheerful five-petal daisy with a round center, sized to fill the front of a medium pumpkin. Nothing is pierced through: you shave the skin off each petal and the center circle so they glow softly while the outlines stay as untouched rind. Because this is an easy shading design, scrape each petal to an even depth of about half the wall thickness so all five light up with the same warm tone. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Expose the flower. Remove skin and scrape a shallow layer from all gray areas. Keep the white ring around the center, the gaps between the five petals and the surrounding skin intact.
- Round the five petals. Deepen the broad dark-gray areas marked 2. Leave each light-gray rim shallower and blend the depth gradually toward it. Follow the petal curves; keep the pumpkin wall unbroken.
- Light the round center. Deepen the central circle marked 3 a little at a time. Leave its light-gray edge and white outer ring intact. Check all six glowing areas with an LED before increasing the depth.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateSunny Bloom Pumpkin Stencil
Eight oval petals radiate from a dotted center like a stylized sunflower, with three small seed holes in the middle and a leafy stem opening anchoring the bloom below. Each petal is a pierced oval, and the skin spokes left between them hold the flower together while letting light pour through. Cut opposite petals in pairs, top then bottom, left then right, so the spokes never take uneven strain.
IntermediateFive Petal Flower
A five petal flower with slender veins radiating from a round center fills the front of the pumpkin. Nothing is pierced; you shave away only the skin inside each petal and the center disc so the flesh glows softly while the wall stays solid. Use a loop tool and keep the shaving depth even across all five petals so the whole bloom lights at the same brightness.
Beginner-friendlyHospital Lights Pumpkin Stencil
A bold medical plus sign glows at the top while a row of small square windows and a larger doorway below turn the pumpkin into a tiny lit-up hospital. Every shape cuts straight through, and the straight-edged squares make this an easy, tidy carve, perfect for healthcare workers or a first-responder porch display. Score each square with a ruler before cutting so the windows line up in a neat row.
Beginner-friendlyWhispering Pines Pumpkin Stencil
Three tiered evergreen trees of different heights stand side by side, each with a short trunk, forming a tidy little glowing forest. Every tree is cut through as its own complete silhouette, and since none of the shapes touch, each cutout releases cleanly on its own. It is an easy, satisfying carve; start with the tall center tree, cut each stepped branch layer from the outside tip inward, and finish with the little trunks.
Beginner-friendlyHeirloom Smiley Pumpkin Stencil
Two big round eyes and one broad crescent smile make up this whole cheerful design, glowing warm amber against the shell. All three shapes are cut cleanly through with no teeth or interior details, so the face works on any pumpkin color, and it looks especially striking on a blue or white heirloom variety. As an easy carve, use a round cookie cutter or drill bit to keep the eyes perfectly circular, then saw the wide grin in two relaxed passes.
Beginner-friendlyThe Gentle Beam Pumpkin Stencil
A tall, friendly face made of just three shapes: two upright oval eyes and one deep crescent smile sweeping nearly the full width of the pumpkin. All three openings are pierced through, and the design especially suits oblong or elongated pumpkins. It is an easy carve with big forgiving shapes; cut the wide smile in two halves that meet at the center bottom so the long curve stays smooth and the flap comes out in manageable pieces.





