Similar pumpkin stencils
View all stencils →About this stencil
This free Vampire Face pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A close-up vampire face dominates this witch-category pumpkin stencil, featuring wide circular eyes with small pupils, a widow's-peak hairline, swept-back collar wings, and a gaping mouth with prominent fangs. The large open areas of the eyes, collar, and mouth are pierced through, while the face itself stays solid so the features read clearly when lit. Cut the two eye circles first to anchor your registration, then work outward to the collar wings before tackling the mouth and fang gaps. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Beginner-friendly. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Print and tape the stencil to your cleaned, dry pumpkin surface.
- Transfer the design by poking transfer holes along all cut lines with a pin tool.
- Cut the two large circular eye openings first to confirm the stencil is positioned correctly.
- Move to the collar wings on each side, cutting cleanly through the swept-back shapes.
- Cut the wide crescent mouth and the individual fang gaps last; the narrow bridges between fangs are the most fragile point, so use a thin-blade detail saw and cut each one in a single controlled stroke.
- Light from inside with a small LED puck to make the widow's-peak shadow read against the glowing eyes.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyHappy Vampire Pumpkin Stencil
A cheerful jack-o-lantern face with vampire character fills this beginner-friendly pumpkin stencil: two large arching eye openings each cradle a small solid half-moon pupil, a small heart-shaped nose cutout sits in the center, and a wide grinning mouth shows two prominent pointed fangs flanked by rows of square teeth. Each feature is a distinct pierced-through shape separated by solid pumpkin bridges. Start with the heart-shaped nose and the small pupil islands inside each eye before opening the bigger eye arches, so those internal solid pieces stay anchored while you work.
Beginner-friendlyVampire Jack-o-Lantern Pumpkin Stencil
A classic jack-o-lantern face with a vampire twist fills this pumpkin stencil: arched brows made of two angular patches over each eye, two large irregular triangular eye openings, a small v-shaped nose cutout, and a wide gaping mouth with jagged upper fangs and a rounded lower lip. All features are separate pierced-through shapes, so the candle-lit face shows glowing eyes, nose, and teeth against the solid orange pumpkin skin. Cut the small v-shaped nose notch and the two narrow eyebrow patches first so you can use the surrounding wall for leverage when carving the larger mouth and eye shapes.
Beginner-friendlyDracula Pumpkin Stencil
This easy vampire pumpkin stencil shows a classic jack-o-lantern face with two arched, angry eyes sporting jagged inner cuts, a small triangular nose, and a wide curved mouth lined with sharp teeth including prominent fangs at each corner. All the facial elements are carved through as open voids, leaving the surrounding face solid. The wide-open mouth is the largest single cut; take it in two or three sections, pausing at each tooth point, to keep the thin tooth tips from snapping off.
Beginner-friendlyVampire Fangs Pumpkin Stencil
Three simple shapes make up this easy vampire pumpkin stencil: two large angular eye cuts that taper to sharp inner corners and a wide crescent grin with two pointed fangs hanging from the upper lip. The design is spare and confident, leaving most of the pumpkin surface solid, so the three glowing openings read as a sinister smirk from a distance. When lit, the fang tips glow brightest; cut the fangs from the inside of the mouth outward so your blade exits the shell cleanly without cracking the narrow points.
AdvancedCaped Dracula Pumpkin Stencil
A cartoonish Dracula figure stands arms raised and cape spread wide in this hard pumpkin stencil, with pointed ears, a brow furrowed in menace, two prominent fangs, and clawed hands at the tips of the outstretched arms. The head, torso, and cape folds are rendered as separate cut-through pieces held together by solid pumpkin outlines, so the finished jack-o-lantern reads as a sharp, angular vampire silhouette when backlit. Cut the claw tips at each arm end first since they are the most isolated and will be hardest to control once the large cape areas are removed.
AdvancedThe Dapper Count Pumpkin Stencil
A vampire face shown from the shoulders up dominates this hard pumpkin stencil, featuring a high widow's peak hairline with two swept horns of hair, large pointed ears, a monocle over one eye, a hawkish nose, a thin mustache, and a jagged collar below the chin. Each facial feature is a separate cut-through piece held apart by solid pumpkin lines, so when lit the face reads as a patchwork of glowing angular shapes. The monocle circle is the most isolated piece; carve it first before the eye socket cuts nearby remove the surrounding support.