Similar pumpkin stencils
View all stencils βAbout this stencil
Download the The Dapper Count pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A vampire face shown from the shoulders up dominates this hard pumpkin stencil, featuring a high widow's peak hairline with two swept horns of hair, large pointed ears, a monocle over one eye, a hawkish nose, a thin mustache, and a jagged collar below the chin. Each facial feature is a separate cut-through piece held apart by solid pumpkin lines, so when lit the face reads as a patchwork of glowing angular shapes. The monocle circle is the most isolated piece; carve it first before the eye socket cuts nearby remove the surrounding support. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Advanced. Estimated time: 2-3 hours. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this designβs PDF.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 2-3 hours from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Start with the eye details. Cut the small circle in the eye and the thin crescents that surround it first, then the eyebrow stroke above. These are the most fragile pieces; use a fine saw and light pressure.
- Cut the nose and mouth shards. Remove the narrow slivers that form the nose, the grim mouth line, and the chin shadow. Pierce each shard at its widest point and saw toward the tips.
- Work the ears and head outline. Cut the pointed ear shapes and the thin arcs that trace the bald head. Work every long arc in short sections; the white strips between arcs must stay intact.
- Cut the collar and shoulder pieces. Remove the zigzag collar shards below the chin, one shard at a time, keeping the white ridges between them.
- Free the large shoulder shadows last. The big angular blocks at the lower left and lower right are the largest plugs. Cut each with a tab left attached, support the plug from behind, then slice the tab and push it out from inside.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedCaped Dracula Pumpkin Stencil
A cartoonish Dracula figure stands arms raised and cape spread wide in this hard pumpkin stencil, with pointed ears, a brow furrowed in menace, two prominent fangs, and clawed hands at the tips of the outstretched arms. The head, torso, and cape folds are rendered as separate cut-through pieces held together by solid pumpkin outlines, so the finished jack-o-lantern reads as a sharp, angular vampire silhouette when backlit. Cut the claw tips at each arm end first since they are the most isolated and will be hardest to control once the large cape areas are removed.
AdvancedDracula's Prize Pumpkin Stencil
A bald, hollow-cheeked Dracula figure holds a grinning carved jack-o-lantern to his chest in this hard vampire pumpkin stencil. The face has arching brow ridges, deeply cut cheekbones, fang-edged lips, and small pointed ear nubs. Below the chin the figure's open cape forms a bat-wing shape, and the jack-o-lantern the vampire cradles shows its own triangular eyes and jagged smile as inner cutouts. The composition creates two overlapping scenes: a vampire face above and a glowing pumpkin face below. Work from the outside edge of the cape inward, and carve the inner pumpkin face last to avoid over-thinning the chest wall.
AdvancedVampire Pumpkin Stencil
A snarling vampire face in three-quarter view fills this hard-difficulty pumpkin stencil, with wild flame-like hair, hollow sunken eye sockets, a sharp cheekbone, and an open fang-lined mouth all cut through as negative space. The remaining solid pumpkin flesh forms the angular features of a classic Dracula visage. Lit from behind, the empty eye sockets and open mouth glow fiercely. Carve the eye sockets and mouth interior before tackling the outer hair flames, so the face stays firmly anchored while you work the thin wispy points.
Expert / ProVampire Count Pumpkin Stencil
A vampire count shown from the waist up dominates this expert pumpkin stencil: a swept-back widow's peak hairline, arched expressive brows, sharp angular cheekbones, a sneering half-open mouth, and a high-collared cape spread wide at the bottom. The face is built from many disconnected cut-out islands separated by thin pumpkin bridges, giving the lit design a dramatic stained-glass quality. Before cutting any facial details, map all the bridge lines carefully: the narrow strip between the brow and the cheek is the most fragile connector and must be preserved until the end.
Beginner-friendlyVampire Face Pumpkin Stencil
A close-up vampire face dominates this witch-category pumpkin stencil, featuring wide circular eyes with small pupils, a widow's-peak hairline, swept-back collar wings, and a gaping mouth with prominent fangs. The large open areas of the eyes, collar, and mouth are pierced through, while the face itself stays solid so the features read clearly when lit. Cut the two eye circles first to anchor your registration, then work outward to the collar wings before tackling the mouth and fang gaps.
Beginner-friendlyHappy Vampire Pumpkin Stencil
A cheerful jack-o-lantern face with vampire character fills this beginner-friendly pumpkin stencil: two large arching eye openings each cradle a small solid half-moon pupil, a small heart-shaped nose cutout sits in the center, and a wide grinning mouth shows two prominent pointed fangs flanked by rows of square teeth. Each feature is a distinct pierced-through shape separated by solid pumpkin bridges. Start with the heart-shaped nose and the small pupil islands inside each eye before opening the bigger eye arches, so those internal solid pieces stay anchored while you work.





