Similar to This
View all stencils →About this stencil
Two droopy eyes with dark bottom-rooted pupils weep streams of teardrop cutouts down the cheeks, all above a deep frown split into glowing segments. Every tear, eye, brow, and frown gap is pierced through, so the whole face drips with light in the most dramatic pout of the season. Carve the small teardrops with a fine saw and finish the frown segments last, keeping the rind bridges between them thick. This design is rated Advanced and takes most carvers around 150 minutes from trace to glow. Multi-layer cuts with skin-peel shading. Plan your cuts first.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 95-130 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Raise the two inner brow ends. Cut both regions marked 1. Preserve the high inward tips and the long low outer ends, keeping the white shell bands above the eyes.
- Keep the lower pupils attached. Cut both regions marked 2 around the tall rounded pupils. Preserve their full lower attachments and follow the unequal slanting eye outlines. There is no nose hole.
- Open tears and scattered dots. Cut all regions marked 3: ten pointed tears and seven round dots. Preserve their unequal sizes, staggered heights and full white gaps. Keep the tiniest tears separate from the eye edges.
- Form the six-part frown. Cut all six regions marked 4. Follow the high central slots down toward both low outer ends. Keep all five white dividing bars attached and preserve the broad uncut area beneath the frown.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a linoleum cutter set, x-acto knife, peel tool, and pin transfer wheel. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateRaised Brows and Four Tears
A theatrically miserable pumpkin with worried brows arched high, drooping oval eyes, four teardrops sliding down the cheeks, and a deep downturned frown showing a hint of teeth. Every brow, eye, tear, and the big frown is cut through so the whole sob story glows. A medium carve that lands the joke best when the tears line up; cut the small teardrops first, then the eyes, saving the wide mouth for the end.
Expert / ProSorrow Brows and Falling Tears
A theatrically miserable face with layered droopy brow wrinkles stacked like ribs above two barred, half-lidded eyes, a long drooping nose, and a deep striped frown, all surrounded by cascading columns of teardrops. Every wrinkle, bar, and tear is cut through, creating an ornate pattern of dozens of small openings. This expert carve is all about sequence: work from the center outward and leave the fragile tear columns at the edges for last.
Expert / ProThumbs Up with a Burst
A giant thumbs-up hand bursting from a starburst of radiating lines, complete with a rolled sleeve cuff, four curled fingers, and a proudly raised thumb. The whole emblem is continuous-wall relief carving, sculpted in layered depths with no cut-through openings, so the hand looks almost three-dimensional. This expert design depends on smooth rounded knuckles: rough out the fist as one mass, then separate the fingers with deep V-grooves before final smoothing.
Beginner-friendlyTeardrop Eyes and Broad Frown
Two drooping teardrop eyes slump toward a broad downturned crescent frown, giving this pumpkin the most theatrical pout on the block. All three features are pierced through, and the big simple shapes make it an easy carve with instant comedic payoff. Angle each teardrop eye so both tips point down and outward, and cut the frown from the middle toward each raised corner to keep the curve even.
IntermediateWide Eyes and Eight Cheek Dots
Raised eyebrow slivers arc over two huge oval eyes, while a big O shaped mouth gasps below and four round dots freckle each cheek. All the openings are simple pierced shapes, but their sheer number bumps this into medium territory. Drill or core the eight cheek dots first while the wall is still strong, then cut the large eyes and mouth so the face keeps its comic shocked stare.
Beginner-friendlyUneven Eyes and Tall Mouth
A comically startled face built from two round eyes set at slightly uneven heights and one tall oval mouth frozen in an open gasp. The three openings are pierced through, and the design shines on bumpy or warty pumpkins where the texture adds to the goofy shock. As an easy carve with only three shapes, the tip is to embrace the asymmetry: keep the eyes deliberately offset rather than trying to level them perfectly.