Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
66 results · Page 2 of 2
Round Eyes and Two Short Teeth
Round eyes, a small triangle nose, and a broad grin with two stubby square teeth give this jack-o'-lantern a warm, welcoming personality. The eyes, nose, and mouth are cut through, while the two little teeth stay attached along the top of the smile. On this easy carve, cut carefully around each tooth so it remains anchored to the wall; everything else is simple circles and one flowing mouth curve.
Seven-Rib Shell and Three Dots
A fan-shaped scallop shell spreads seven glowing ribs from a hinged base, crowned by three small round dots floating above like sea spray. Each rib is its own cut-through opening separated by strips of intact wall, so the shell keeps its elegant ridged look when lit. Cut the center rib first and work outward symmetrically, keeping the dividing strips at least a finger-width so the fan stays strong.
Shell Fan With Two Dots
Five elongated petal-shaped openings fan out from a point near the base, forming a glowing scallop shell topped by two small round dots below. Each opening is fully pierced, and the ribs of shell left between them create the fan effect. Keep those dividing ribs at least half an inch wide as you cut so the fan holds its structure, working from the center petal outward.
Simple Glowing Cross
A tall Christian cross glows from the center of the pumpkin, with slightly tapered arms that give the shape a hand-hewn, rustic feel. The entire cross is cut through, so candlelight pours out in one bold symbol while the rest of the shell stays untouched. Since this is an easy single-opening design, take the vertical beam in two long, steady strokes and the crossbar last to keep every edge crisp.
Six Waves Sun and Starfish
A half-sun sets over two rows of curling surf, six stylized waves in all, with a chunky starfish tucked at the end of the bottom row. Each wave curl, the sun, and the starfish are individual cut-through openings separated by healthy strips of skin. For a medium carve like this, work top row first and keep the skin bridges between waves at least finger-width so the pattern stays strong through the whole session.
Sleeping Moon, Stars & Cloud
A sleepy crescent moon with a gentle closed-eye face drifts above a puffy cloud, with two twinkling stars floating at its side. Most of the design is shaded by shaving the skin so the moon and cloud glow softly, while the stars can be etched to match. Keep your shave shallow on the facial features, going just deep enough on the eyelid and lips that they read as darker lines.
Snowcap Peaks and Moon
A wide arched window is carved through the pumpkin with three mountain peaks left standing in dark silhouette, while a full moon glows from a separate round opening above. The sky area around the peaks gets cut away and small snowcap notches pierce the summits, so light outlines the whole range. Keep the peak silhouettes attached at the base as you saw the sky sections, since they anchor the entire scene.
Star Above Two Chevrons
A six-point badge star shines above two stacked chevron stripes, with three small dots arcing over the top like a crest. Every shape is cut fully through the wall, giving the design the crisp look of a service badge or rank insignia glowing on the porch. Cut the chevrons from their outer ends toward the center points, and keep the rind strip between the two stripes intact for a clean military edge.
Sun With Eight Rays
A bold sun built from a glowing circular ring surrounded by eight fat triangle rays, evenly spaced like a compass. Every ray and the ring band are cut fully through, so the whole emblem blazes with candlelight while the center disc and surrounding skin stay dark. This easy design suits first-time carvers; cut the ring in short arc sections rather than one continuous pass to keep the circle round.
Tall Eyes and Deep Crescent
A tall, friendly face made of just three shapes: two upright oval eyes and one deep crescent smile sweeping nearly the full width of the pumpkin. All three openings are pierced through, and the design especially suits oblong or elongated pumpkins. It is an easy carve with big forgiving shapes; cut the wide smile in two halves that meet at the center bottom so the long curve stays smooth and the flap comes out in manageable pieces.
Tall Eyes and Twin Upper Teeth
The timeless jack-o'-lantern: two tall triangle eyes, a small triangle nose, and a broad smile notched by two square upper teeth. Every element cuts straight through with simple lines, making this the ideal very first pumpkin carve. Use long, steady saw strokes and keep the blade perpendicular to the shell so the triangle points stay sharp, then pop each piece out from the inside.
Tall Triangles and Open Smile
Two tall triangle eyes and a wide open smile with a single pointed upper notch make up this timeless jack-o'-lantern face, shown here glowing warmly from an ivory white pumpkin. Every shape is a straightforward cut-through with no attached pieces to protect. It is as easy as carving gets: make long straight cuts for the triangles and let the knife follow the smile's curve in smooth strokes, and it looks brilliant on white or orange pumpkins alike.
Tall Triangles and Twin Teeth
The timeless jack-o'-lantern: two tall triangle eyes, a smaller triangle nose, and a wide friendly smile interrupted by two blocky teeth, one dropping from the top lip and one rising from the bottom. All four shapes are cut straight through for that classic warm glow. This easy pattern is ideal for a child's first supervised carve; make each triangle in three straight cuts and push the pieces out from inside the pumpkin.
Three Mountains and Moon
A minimalist night landscape made of three simple triangle peaks in a row with a full round moon floating above them. Each triangle and the circle are cut cleanly through, turning the pumpkin into a tiny glowing mountain scene. This is one of the easiest patterns to carve; keep the triangle points sharp by cutting into each corner from both directions instead of turning the blade.
Three Rainbow Arches
Three nested arches stack like a glowing rainbow, each band cut fully through so the pumpkin lights up in bright concentric ribbons. The strips of pumpkin left between the arches form the rainbow's dark bands and keep the wall sturdy. It is an easy design with big visual payoff; cut the smallest inner arch first and work outward, and keep the leftover ribs at least half an inch wide so they stay strong.
Tree Pose with Raised Arms
A serene figure balances in yoga tree pose, arms raised overhead and one foot tucked against the standing leg, flanked by leafy sprigs on a shaved ground line. The design is entirely skin-shave shading with no pierced holes, so the figure glows in pale relief against the dark rind. Shave the torso and legs in long continuous strokes for smooth lines, then detail the thin arms and leaves with a fine gouge.
Triangle Eyes and Crescent Grin
A bold traditional design pairing two big triangle eyes with a wide crescent grin crossed by chunky square teeth top and bottom. All openings pierce the wall completely, so the face burns bright on any pumpkin, including green or white varieties. An easy carve with generous shapes; free the tooth gaps first, then cut the long smile curve in sections so the grin keeps its clean sweep.
Triangle Eyes and Long O Mouth
Two crisp triangle eyes sit above a tall oval mouth frozen mid-gasp, the three-hole formula that has decorated doorsteps for generations. All three shapes cut straight through, so the whole face can be finished in minutes, making it the ideal last-minute design. Cut each triangle with three straight strokes that overlap slightly at the corners so the points pop out cleanly.
Triangle Eyes and Twin Teeth
The timeless jack-o'-lantern: two bold triangle eyes, a matching triangle nose, and a wide friendly smile with two square teeth breaking the curve. Every feature is cut fully through, leaving the rest of the pumpkin smooth so the glowing shapes do the talking. Straight lines make this an ideal easy carve; score the triangles with a ruler edge first and the cuts will fall right in place.
Triangle Face and Lower Teeth
The most traditional face in the patch: two triangle eyes, a triangle nose, and a wide smile interrupted by two square teeth rising from the lower lip. All five shapes cut straight through with no curves to fight, making this an ideal first carve. Push the saw in straight vertical strokes and finish each triangle corner cleanly from both sides before popping the piece out.
Triangle Ring and Jagged Grin
An ornate expert-level face framed by a full ring of small triangle cutouts circling the pumpkin, with chevron-crested brows, barred flame-shaped eyes, a diamond nose, and a huge jagged grin holding fourteen zigzag teeth. Everything pierces through, so the finished lantern sparkles from every angle like carved lace. Plan your order: punch the border triangles first while the wall is rigid, then work inward, saving the long fragile grin for the very end.
Turnip Triangle Surprise Face
A nod to the original Irish lanterns: a simple startled face with two triangle eyes and a small arched mouth, designed to suit a turnip, rutabaga, or small pale pumpkin. All three openings cut straight through the wall. Root vegetables are much denser than pumpkins, so hollow the inside generously first and use short, firm saw strokes; on a regular pumpkin this carves in minutes.
Twin Crescent Eyes and Smile
This vintage-style face uses two curved crescent eyes that seem to squint with delight, a small triangle nose, and a broad smile interrupted by one chunky hanging tooth. Every shape cuts fully through the wall, and the pieces are large enough that a keyhole saw handles them easily. Cut the inner curve of each crescent first so the thin points at the tips release cleanly without tearing.
Twin Crosses Beneath Arches
Two crosses stand side by side, each framed beneath its own tall rounded arch like twin chapel windows. The arch outlines and the crosses are cut through the wall as narrow channels, so light traces the frames while the solid rind inside each arch makes the crosses read boldly. At medium difficulty the slim arch bands are the fragile part, so cut them in short segments and leave the interior panels firmly attached.
Uneven Eyes and One-Tooth Grin
A timeless porch-ready jack-o'-lantern with two slightly uneven oval eyes, a small triangle nose, and a long friendly smile broken by a single square tooth. All four openings are generous cut-through shapes, so beginners can saw steadily without worrying about fragile bridges. Angle your blade slightly outward as you cut so each piece pops free toward you and the glow spreads wider at night.
Vintage Arches and Round Grin
Arched triple line brows curl above big eyes divided by rind bars, a long triangle nose drops between them, and a huge grin shows a full row of rounded teeth with dotted curlicue accents swirling at each cheek. All the openings are cut through in a cheerful retro style straight off an old holiday postcard. Rated hard for its many small dots and thin brow lines, it rewards a fine detail saw and a drill for the dots.
White-Pumpkin Happy Face
A cheerful jack-o'-lantern face with big rounded eyes, a small triangle nose, and a wide crescent smile with a single square tooth. Every feature is fully cut through, so the whole face glows once a candle goes in. It looks especially striking on a white pumpkin, where the warm light pops against the pale skin. An easy first carve; just leave the little bridge above the tooth intact so the grin holds its shape.
Wide Crescent and Short Teeth
The timeless jack-o'-lantern: two triangle eyes, a triangle nose, and a wide crescent grin broken by a few short square teeth left in place. Every shape is a straightforward cut-through, making this an ideal first carve of the season. Cut each triangle in three straight strokes that meet at the corners, and leave the teeth generous so they do not snap off.
Wide Smile on a Warty Pumpkin
Two big triangle eyes and a huge upturned crescent smile turn any bumpy heirloom pumpkin into a cheerful classic jack-o'-lantern. All three shapes are simple cut-through openings, so warts and ridges on the shell only add character around the glow. This easy pattern is perfect for a first carve; make long smooth strokes along the smile and pop each triangle out in one clean piece.
Wink and Five Rounded Gaps
One eye is a jaunty upswept crescent wink while the other stays a wide triangle, set over a small diamond nose and a lopsided grin broken into five rounded gaps by chunky teeth. The eyes, nose, and mouth gaps are cut through, leaving the tooth shapes as attached skin between them. A medium carver should cut the five mouth gaps individually rather than one big mouth, which keeps every tooth solidly connected and the crooked smile intact.