Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
111 results · Page 2 of 4
Fluffy Kitten Pumpkin Stencil
A wide-eyed, fluffy kitten sits upright with its front paws tucked forward in this expert-level pumpkin stencil. The fur is rendered as dozens of short jagged cut-outs that texture the entire head and body, with two large round eyes and a small tongue-out mouth pierced through in the face. Lit from within, the cat's face glows clearly while the fur detail creates a speckled halo of light around it. Cut all the inner facial features before the outer fur ring, since the edge fringe is fragile and removing those last keeps the face from shifting while you work.
Flying Bats Pumpkin Stencil
Five bats in mid-flight are scattered across the pumpkin face in this hard pumpkin stencil, ranging from a large swooping bat in the upper left down to a small one at the lower right, each drawn with jagged, pointed wing edges and tiny body details. All five bats are cut through as separate open shapes, so candlelight spills through each one individually and the pumpkin reads as a night sky full of swooping shadows. Cut the smallest bottom-right bat first while the pumpkin surface is fully rigid, then work upward to the largest.
Flying Saucer Pumpkin Stencil
A classic flying saucer seen from a three-quarter angle fills this hard space pumpkin stencil. The domed cockpit on top, the wide flat disc with a raised rim, three small round indicator lights on the underside, and three diverging tractor-beam rays below all read clearly as carved shapes. The beam rays are solid pumpkin strips between large open triangular cutouts, so lit from inside the beam glows as three bright triangular shafts pointing downward. Carve the three beam triangles first since they are the largest open areas, then work upward through the disc details and finish with the small circular indicator lights.
Football Pumpkin Stencil
An American football seen at a slight angle fills this pumpkin stencil, showing the oval ball body with a central lace strip of intersecting horizontal and vertical bars, plus two pointed corner panels at upper left and lower right that indicate the ball's tips extending beyond the oval. The entire ball outline, including the lace grid, is a single large pierced-through area that blazes with light against the solid pumpkin skin. Keep the lace crossbar strips intact while carving the surrounding oval by making your entry cuts along the ball's outer edge rather than through the lace bars.
French Bulldog Pumpkin Stencil
A front-facing French Bulldog puppy sits with large upright ears, wide cartoon eyes with round pupils, a flat pushed-in nose, spot-marked cheeks with tiny freckle dots, and chunky paws crossed at the bottom in this dog pumpkin stencil. The cut-away areas around the ears, inside the eyes, and across the chest give the glowing jack-o-lantern a strong portrait effect with plenty of warm orange pumpkin skin defining the Frenchie's wrinkled face. Carve the freckle dots and pupil circles before the ear openings so the delicate face detail is cut while the surrounding skin is at its firmest.
French Bulldog Pumpkin Stencil
A French Bulldog face stares straight out in this hard dog pumpkin stencil, its large upright bat ears, flat wrinkled muzzle, deep-set eye hollows, pushed-in nose, and jowl folds all captured as a continuous linework design with the open channels carved through and the skin ridges left intact. The ears are wide and open, connecting to the head via two curving lines that form thin bridges at the ear base. Carve the interior face details, including the eye hollows, nose curl, and jowl lines, before cutting the outer ear outlines, so the head stays rigidly attached while you work the delicate inner linework.
Fuzzy Monster Pumpkin Stencil
A round, fuzzy cartoon monster with stubby arms and legs dominates this hard pumpkin stencil, set inside a large circular frame with small scattered cut-outs suggesting a speckled texture. The creature has crescent-shaped eyes, a wide open mouth rimmed with ragged teeth, and a tongue poking out, while splatter-like shapes burst from the sides. The monster's body is largely solid orange with the negative space around it carved out, so light escapes the outer circle and the scattered texture dots, keeping the face readable. Cut the circular outer border and the scatter dots before tackling the detailed mouth.
Garden Gnome Pumpkin Stencil
A garden gnome with a tall floppy pointed hat, round rosy cheeks, and a tiny curved smile stands front-facing in this easy pumpkin stencil. The hat brim curls at its tip, the face is framed by a bushy beard rendered as rounded overlapping lobes, and small feet peek out at the base. Cut-through openings define the hat interior, the beard lobes, and the body, while the face circle, hat brim, and outer silhouette stay solid. The small smile curve and cheek details are the most delicate pieces, cut them before opening the large beard sections below.
Gargoyle Pumpkin Stencil
A detailed gargoyle face stares out from this expert pumpkin stencil, with swept-back horns, pointed ears, arching eyebrows, a broad flat nose, and wide wings that flare to either side like a cathedral guardian. Dozens of separate cut-out pieces form the facial features and wing feathers, leaving solid bridges of pumpkin skin to hold each island in place. Work from the smallest interior details outward: cut the eyebrow slashes, nostril notch, and tiny chin dimple first, then the larger wing panels last, to keep the fragile facial bridges stable while you carve.
German Shepherd Pumpkin Stencil
A German Shepherd in a proud alert stance fills this pumpkin stencil as a single clean silhouette: erect pointed ears, a strong muzzle, a deep chest, and a slightly tucked hindquarter all captured in an unbroken outline with no interior cut-outs. When carved, the whole dog shape is one large pierced-through opening that glows as a pure bright silhouette against the dark night. Because the design has no internal bridges to worry about, trace the outline slowly and keep the cut continuous, paying extra attention to the sharp ear tips and the fine fur texture along the belly line, which can tear if the blade catches.
Giraffe Pumpkin Stencil
A giraffe's elongated head and neck fill this pumpkin stencil from top to bottom, its distinctive coat pattern recreated as dozens of organic blob-shaped spots scattered across the neck and face. Each spot is a separate pierced-through opening, so when lit the jack-o-lantern glows with a constellation of irregular patches that read unmistakably as giraffe markings. Because many spots sit close together, cut the smallest spots near the top of the head first and work downward toward the larger neck patches, so the thin walls between neighboring openings stay supported longest.
Googly-Eyed Ghost Pumpkin Stencil
A cartoonish goggle-eyed creature with a wide open mouth and trailing ghost-like body fills this pumpkin stencil: two circular eyes each orbit a crescent-shaped eyelid, and a broad flowing torso dissolves into wispy tendrils at the base. The large open area of the body is pierced through entirely, while the eye elements and a small beak-like mouth cutout remain as floating islands bridged by thin pumpkin walls. Cut the smallest interior eye details before the large body opening so the bridges stay supported and the delicate crescent lids don't snap under tool pressure.
Haunted Church Pumpkin Stencil
A tall, narrow haunted church or castle rises in this pumpkin stencil, with a central spire topped by a cross, two flanking branch-like towers each capped with crosses, arched windows, and square window panels scattered across the facade. The entire structure is cut out as a series of interconnected shapes against the solid pumpkin face. Carve the small window squares and the tiny cross tops first, working top to bottom, so the tall thin towers stay structurally sound until the end.
Haunted Oak Tree Pumpkin Stencil
A bare haunted oak rises inside an oval frame in this expert-level tree pumpkin stencil, its trunk split at the base into gnarled roots, its branches spiraling upward with curling scrolled tips, and a sinister face lurking at the trunk where two narrow eye-slits and a spiky mouth hide among the roots. The large background sections within the oval are cut away so the curling branch and root shapes glow as solid orange silhouettes against a dark interior. Work from the outermost curled branch tips inward toward the trunk so the delicate spirals stay supported while you remove the surrounding background.
Haunted Tree Pumpkin Stencil
A gnarled, bare-branched haunted tree with an angry face hidden in its trunk dominates this expert-level pumpkin stencil, its dozens of thin branch tips and the snarling mouth and eye details forming an intricate web of cuts. When lit, the branching silhouette glows against the pumpkin's skin with dozens of narrow passages of light. Work from the outermost branch tips inward toward the trunk face so the stencil sheet holds its shape while you cut the trickiest inner details last.
Haunted Tree Pumpkin Stencil
A gnarled, wind-blown tree trunk splits into wildly curling branches with spiral tips in this hard-rated pumpkin stencil, the entire tree canopy forming a large negative-space cut-out against a small RIP gravestone and a spider-web accent that remain solid. The swirling branch tips are the most delicate cuts in this design; save them for last and use a thin-tipped blade, approaching each spiral from the outside inward so you never cut across a completed curl.
Hawaii Pumpkin Stencil
The Hawaiian island chain appears as a scatter of eight organic island shapes across this pumpkin stencil, ranging from the tiny northwestern islets at upper left down to the large triangular mass of the Big Island at lower right, all correctly spaced in their northwest-to-southeast arc. Each island is an individual pierced-through cutout, so the lit jack-o-lantern glows with the archipelago floating in a dark pumpkin sky. Cut the three smallest islets at the upper left first before carving the larger islands, so the thin walls between the close-spaced upper shapes stay intact while you work toward the spacious lower portion.
Horned Demon Skull Pumpkin Stencil
A demonic horned skull with massive curved ram-like horns and a symmetrical face composed of dozens of interlocking cut fragments makes this one of the most intricate skull pumpkin stencils available. The forehead, cheeks, and jaw are all broken into shaped segments separated by thin pumpkin bridges, and the horns are densely cross-hatched with ridged cuts. Work from the center outward, cutting the tiniest interior fragments first before opening any large jaw or eye-socket voids, to avoid collapsing the many delicate bridges that hold the design together.
Horned Devil Face Pumpkin Stencil
A snarling horned devil face bursts outward in this expert pumpkin stencil, its deeply detailed visage surrounded by wild flame-like hair, pointed ears, and curling scroll accents, while the eyes, nostrils, and sneering mouth with individual teeth are all cut through as fine interior negative spaces. Dozens of flame-fringe cuts radiate from the outer edge, creating a dense, fiery halo effect when lit. Work from the center face features outward toward the flame fringe, so the most delicate outer tips are cut last when you have the steadiest control.
Howling Werewolf Moon Pumpkin Stencil
A howling werewolf perched on a rocky cliff dominates this expert pumpkin stencil, with a large full moon carved as an open oval behind the creature. The moon's interior is a solid pumpkin island held in place by a narrow strip at the top where the wolf's body bridges it. Scraggly pine trees and scattered bat silhouettes flank the scene, their fine spiky branches adding delicate pierced detail against the candlelit opening. Carve the large moon opening first to anchor the composition, then work outward through the bats and trees, leaving the thin bridge at the wolf's neck for last.
I Love Delaware Pumpkin Stencil
Delaware's stencil displays the four-element "I Love DE" grid: block I, heart, and the letters D and E in squared slab-serif type. The D has a large open interior that cuts away as a single rounded rectangle, while the E has three horizontal teeth that remain as solid bridges within its rectangular frame. Those E teeth are the most structurally delicate part of this carve; cut the three open slots between them with short controlled strokes moving away from the center tooth to avoid widening a gap.
I Love Missouri Pumpkin Stencil
The Missouri pumpkin stencil arranges "I [heart] MO" across two rows in chunky rounded type, with a large open heart as the visual center. The letter "O" in "MO" is a round shape with a solid ring of pumpkin left between its outer edge and the surrounding wall, making it the most structurally delicate piece of this design. Score the outer circle of the "O" before the inner opening, then carefully extract the ring section to keep the thin bridge intact.
Illinois State Shape Pumpkin Stencil
Illinois carves as a single bold silhouette on this pumpkin stencil: a gently irregular vertical shape wider at the top, with a notched northwest corner and a distinctive southward-pointing tip at the lower right where the state meets the Ohio River confluence. The entire outline is pierced through, so the glowing window reads cleanly as Illinois's unmistakable profile. Work the concave northwest notch with short controlled strokes, and save the delicate southern tip for last to keep the stencil firmly attached during the earlier cuts.
Jesus Portrait Pumpkin Stencil
A front-facing portrait of Jesus with long flowing hair, a short beard, and softly rendered facial features fills this expert-level pumpkin stencil. The background and hair are pierced through as large open sections, while thin bridges of solid pumpkin skin form the eyes, nose, and beard details. Lit from inside, the face glows with warmth against the dark cut-out surround. Cut the large hair sections first to ease tension in the skin before tackling the delicate facial feature bridges.
Jolly Roger Pumpkin Stencil
A classic Jolly Roger design fills this pumpkin stencil: a grinning skull topped by a pirate hat bearing a tiny skull-and-crossbones badge sits above two crossed cutlass swords with curled hand-guards. The eye sockets, the hat badge, the small triangular nose cavity, and the gaps between the sword blades are all pierced through. Cut the miniature hat badge first since it is the most delicate isolated element, then the eye sockets and sword gaps, before finishing with the outer hat and blade silhouette.
Kawaii Acorn Pumpkin Stencil
A kawaii-style acorn character fills the stencil: the domed cap is covered in a dense diamond lattice of cut-out shapes, while the rounded body below carries two crescent-shaped eyes, a small curved smile, and delicate arm curves along each side. Lit from within, the hatched cap glows like a lantern screen and the face reads warmly against the solid body. Carve the lattice diamonds from the center of the cap outward, and avoid cutting the thin grid lines between them until all surrounding diamonds are removed.
Kentucky State Shape Pumpkin Stencil
Kentucky's silhouette on this pumpkin stencil is immediately recognizable: a wide horizontal shape with a jagged, highly irregular northern border formed by the Ohio and Big Sandy River lines, a relatively smooth southern edge, and a narrow western tail that extends down and to the left. The northern border has the most intricate linework of any state stencil in this series; work those small notches with a narrow pointed blade, making short plunge cuts at each concave corner rather than trying to sweep around them.
Kitten Pumpkin Stencil
A chubby kitten head in silhouette is the subject of this easy cat pumpkin stencil, showing one ear, a round face, and a small curled tail peeking below, with four delicate whisker lines extending from either side. The main body is cut away as one large opening; the whisker lines are narrow positive strips of pumpkin skin that must not be cut. When carving, leave the whisker lines until you have removed the large body void on each side, then carefully define their outer edges with a single shallow scoring pass.
Lion Head Pumpkin Stencil
A majestic lion's head fills this pumpkin stencil from edge to edge, its full flowing mane rendered in sweeping curved cuts that radiate outward like flames, with the face centered and features defined by pierced nostrils, brow lines, and an open lower jaw. Lit from inside, the solid orange pumpkin forms the mane and facial structure while the cut gaps create the dramatic shading between mane locks. Begin carving in the outermost mane tips, where cuts are shortest, and work inward toward the face so the central wall remains stable while you navigate the most intricate facial detail cuts.
Little Devil Pumpkin Stencil
A small cartoonish devil figure with horn nubs, a pointed tail, and a three-pronged trident stands with a mischievous grin on this devil pumpkin stencil, the body and limbs carved as a tight cluster of connected cutouts. The trident tines and the arrowhead tail tip are the narrowest elements in the design. Carve those thin trident prongs and the pointed tail tip before cutting the larger body void, as opening the chest area too early weakens the wall near those delicate outer points.
Maryland Pumpkin Stencil
Maryland's instantly recognizable outline appears as a single cut-through silhouette on this pumpkin stencil, showing the state's wide rectangular body, the deeply indented Chesapeake Bay notch along the right side, the narrow Eastern Shore peninsula, and the small western panhandle extending to the left. Because the Bay notch splits the right edge into two separate lobes, the wall between them is slender. Cut the inner Bay-notch corners first using a pointed blade so that delicate section doesn't flex and tear while you remove the larger open areas.
Michigan Pumpkin Stencil
Michigan's Lower Peninsula occupies most of this pumpkin stencil, its mitten-like silhouette instantly recognizable with the distinctive thumb peninsula on the upper right. A small notch at the top indicates where the Upper Peninsula begins, adding geographic accuracy to the outline. The entire shape is carved as a single open cutout, letting candle glow illuminate the full state contour. The thumb peninsula's base is a narrow waist of pumpkin wall, so cut the outer edge of the thumb with a slow controlled stroke before removing the larger lower-peninsula body.
Monster Tree Pumpkin Stencil
A menacing anthropomorphic tree creature with clawed outstretched arms, a roaring jagged-toothed mouth, and swirling branch-tentacle hair stands silhouetted inside a large circular moon in this expert pumpkin stencil. The entire moon disc interior is cut away and glows with light, while the creature silhouette and the area outside the moon ring remain as solid pumpkin skin. The swirling hair tendrils at the top create the finest detail against the glowing backdrop. Cut those wispy curling tips before clearing the large moon interior, to avoid cracking the delicate spiral ends once the surrounding wall is weakened.
Moon and Stars Pumpkin Stencil
A slim crescent moon curves on the left side of this space pumpkin stencil while seven five-pointed stars of varying sizes are scattered across the open field to its right, all shapes cut through as separate glowing elements. The smallest stars are only an inch or so across and sit as isolated islands on the pumpkin face; carve those tiny stars first with a craft knife tip or small saw while the wall is at full stiffness, then remove the larger crescent and remaining stars in order from smallest to largest.
Mummy Pumpkin Stencil
A mummy figure wrapped in overlapping bandage strips stands upright in this hard pumpkin stencil: a round hooded head with two crescent eye cutouts and small circle pupils, a neck section, and a torso crisscrossed with diagonal and horizontal bandage-strip cutouts that create an intricate lattice pattern in the lower half of the design. Lit from inside, the bandage lattice glows as a grid of bright lines framed by solid pumpkin strips. Begin with the two eye crescents and pupil circles in the face, then work downward through the lattice section one row at a time to keep the remaining skin stable.
North Carolina Pumpkin Stencil
North Carolina's distinctive silhouette fills this state pumpkin stencil: a wide, roughly trapezoidal body with a notched southwestern corner, a stepped northern border, and the ragged Outer Banks barrier-island coastline jutting into the Atlantic on the right. The entire state outline is pierced through as one connected opening so candlelight floods through the recognizable shape. Because the Outer Banks coastline is the most intricate edge on this stencil, cut that section last using short, controlled strokes to keep the thin peninsular points intact.