Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
202 results · Page 5 of 6
Sneering Fangs and Slanted Eyes
A sinister face with narrow slanted eyes, a slim angled nose, and a wide sneering mouth bristling with pointed fangs top and bottom. Eyes, nose, and mouth are pierced clean through, with the fang shapes left as solid teeth jutting into the glowing opening. Even though it rates easy, the fang tips are fragile; cut each tooth from base to point and let the waste fall away instead of pulling it free.
Soccer Ball Pumpkin Stencil
A soccer ball rendered as a flat stencil pattern takes up the full face of this pumpkin carving design, with a central pentagon surrounded by curved hexagonal panels that radiate outward to the edges. The pentagon and several panel sections are cut through, while the curved connecting lines between panels remain as solid orange bridges, recreating the look of a classic black-and-white ball when lit. Carve the central pentagon first, then cut each surrounding hexagonal section in a clockwise order to keep even tension on the skin bridges.
Split-Nose Zigzag Frown
A classic angry jack-o'-lantern face with two sharp slanted eyes, a split two-part nose, and a jagged zigzag frown of pointed teeth. All five openings are cut straight through the wall, leaving the rest of the pumpkin untouched for maximum contrast. It is an easy pattern with only a handful of pieces, so take your time on the zigzag mouth and cut each tooth point cleanly before pushing the waste piece out.
Standing Mummy Pumpkin Stencil
A mummy figure wrapped in overlapping bandage strips stands upright in this hard pumpkin stencil: a round hooded head with two crescent eye cutouts and small circle pupils, a neck section, and a torso crisscrossed with diagonal and horizontal bandage-strip cutouts that create an intricate lattice pattern in the lower half of the design. Lit from inside, the bandage lattice glows as a grid of bright lines framed by solid pumpkin strips. Begin with the two eye crescents and pupil circles in the face, then work downward through the lattice section one row at a time to keep the remaining skin stable.
Tall Cat With Rounded Teeth
An upright cat face sized for taller pumpkins: leaf-shaped eyes, a small triangle nose, three long whisker slits on each cheek, pointed ears, and a smiling mouth with rounded teeth left in place. Every feature is a simple pierced cutout. Carve the skinny whisker slits with a fine blade before opening the larger eyes and mouth so the wall stays stiff while you work.
Tall Eyes and Crooked Tooth
Two tall rounded eyes of slightly different sizes sit high on the pumpkin above a small off center smile holding one square tooth. Only three openings get cut, which keeps this easy pattern quick and friendly rather than frightening. Leave the little tooth attached by carving carefully around it inside the mouth opening, and save the smaller eye for last while your blade is warmed up.
Tall Eyes and Deep Crescent
A tall, friendly face made of just three shapes: two upright oval eyes and one deep crescent smile sweeping nearly the full width of the pumpkin. All three openings are pierced through, and the design especially suits oblong or elongated pumpkins. It is an easy carve with big forgiving shapes; cut the wide smile in two halves that meet at the center bottom so the long curve stays smooth and the flap comes out in manageable pieces.
Tall Eyes and Twin Upper Teeth
The timeless jack-o'-lantern: two tall triangle eyes, a small triangle nose, and a broad smile notched by two square upper teeth. Every element cuts straight through with simple lines, making this the ideal very first pumpkin carve. Use long, steady saw strokes and keep the blade perpendicular to the shell so the triangle points stay sharp, then pop each piece out from the inside.
Tall Narrow Oval Surprise
A surprised, ghost-like expression designed for very tall, skinny pumpkins: two long oval eyes stacked high, with a bigger gaping oval mouth below. All three ovals are pierced through, and the stretched proportions make the face look like it is mid gasp. This easy design works best when the ovals stay vertical and parallel, so lightly trace all three before cutting and check the alignment from a step back before you commit the knife.
Tall Oval Eyes and Small Smile
Two tall oval eyes and a small curved smile make up this cheerful minimalist face. All three shapes are cut fully through the wall, so the design carves in minutes and beams warm light from every opening. It is an ideal first pumpkin for young carvers with supervision; drill or poke a starter hole inside each eye so the saw can enter without stressing the surrounding rind.
Tall Oval Surprise Face
Two tall oval eyes hover above one big oval mouth, giving a tall pumpkin a startled, ghostlike gasp that reads perfectly from the street. All three shapes are pierced through, and with no corners or fine details it is about as beginner-friendly as carving gets. Rotate the pumpkin instead of your wrist as you saw each oval so the curves stay smooth and symmetrical.
Tall Triangles and Broad Smile
This is the timeless jack-o'-lantern: two tall triangle eyes, a small triangle nose, and a broad crescent smile, all cut straight through the shell. With only four openings and no fragile details, it is an ideal first carve for a new pumpkin carver. Poke pilot holes at each triangle corner before sawing so your straight lines meet exactly where they should.
Tall Triangles and Open Smile
Two tall triangle eyes and a wide open smile with a single pointed upper notch make up this timeless jack-o'-lantern face, shown here glowing warmly from an ivory white pumpkin. Every shape is a straightforward cut-through with no attached pieces to protect. It is as easy as carving gets: make long straight cuts for the triangles and let the knife follow the smile's curve in smooth strokes, and it looks brilliant on white or orange pumpkins alike.
Tall Triangles and Twin Teeth
The timeless jack-o'-lantern: two tall triangle eyes, a smaller triangle nose, and a wide friendly smile interrupted by two blocky teeth, one dropping from the top lip and one rising from the bottom. All four shapes are cut straight through for that classic warm glow. This easy pattern is ideal for a child's first supervised carve; make each triangle in three straight cuts and push the pieces out from inside the pumpkin.
Tears of Joy Emoji Pumpkin Stencil
This emoji pumpkin stencil captures the classic tears-of-joy face: a large circular outline frames squinting crescent eyes, a wide open-mouth smile, and two teardrop shapes streaming from the outer eye corners. Most of the interior is pierced through, leaving thin curved bridges for the eyes, brow shapes, and a tongue strip inside the mouth. When lit, the laughing face reads instantly from across a porch. Keep the two small teardrop cutouts for last, as they are isolated from the main body and can shift if the stencil loosens.
Tennessee Heart Lettering
Bold serif lettering spells out I heart TN in the classic love-declaration layout, with a chunky letter I and heart on the top row and big TN initials below. Every letter and the heart are cut fully through, and the thick strokes make the sawing forgiving for a lettering design. Trace the serifs carefully when transferring the pattern, then cut each letter's inside corners with a fine blade for crisp typography.
Tennessee State Shape
Tennessee's long parallelogram runs nearly the full width of the pumpkin, flat across the top with the jagged mountain border stepping down the eastern end. The entire state is removed as one wide glowing band. Since the opening is long and shallow, cut the straight top and bottom edges first, then work the stepped eastern corner in small bites to keep every notch sharp.
Texas State Shape
The unmistakable outline of Texas, panhandle and all, cut clean through the pumpkin wall so the whole state glows as one bold window of light. Everything inside the border is removed and the surrounding skin is left untouched, making the shape pop from across the yard. At medium difficulty, take the jagged Rio Grande border slowly in short strokes so the wiggly southern edge stays recognizable.
Three Crescents and Five Stars
Three crescent moons stack down the center of the pumpkin, each curving the same direction, with five little five-point stars scattered around them like a night sky. Every moon and star is cut cleanly through, so the whole face twinkles once the candle is in. A pleasant medium carve; punch the small stars first with a detail saw, then cut each crescent from the inner curve outward to keep the horn tips sharp.
Three Stars and Six Dots
Three five-pointed stars descend in a vertical column, each one paired with small round dots scattered alongside like sparkling companions. Designed for tall, narrow pumpkins, every star and dot is a clean cut-through opening that fills the height of the fruit with light. Poke the dots first, then cut each star from its center outward toward the points so the tips stay sharp and intact.
Three-Opening Surprised Face
A hilariously startled face built from just three openings: two round wide-open eyes and one big oval gasping mouth. All three shapes are cut clean through, making this one of the fastest faces you can carve. With no sharp corners anywhere, it is perfect for first-timers; drill a starter hole in each shape and saw outward to the traced line for smooth, even circles.
Tilted Baseball & Crossed Bats
A big tilted baseball sits front and center over two crossed bats, with the ball's curved stitch seams and the bats' wood grain all rendered in shaved skin. This is a continuous-wall shading design, so you peel the skin to different depths rather than piercing holes; deeper shaving makes the ball glow brightest. Rated hard for its layered detail, it rewards patience: establish the crossed-bat outlines first, then texture stitches and grain last.
Triangle Eyes and Crescent Grin
A bold traditional design pairing two big triangle eyes with a wide crescent grin crossed by chunky square teeth top and bottom. All openings pierce the wall completely, so the face burns bright on any pumpkin, including green or white varieties. An easy carve with generous shapes; free the tooth gaps first, then cut the long smile curve in sections so the grin keeps its clean sweep.
Triangle Eyes and Deep Frown
Two fierce slanted triangle eyes glare above a deep downturned crescent frown, turning the whole pumpkin into one magnificent scowl. All three shapes are clean cut-throughs, with the eyes angled sharply inward to sell the anger. This easy carve lives or dies on those angles: keep the inner eye points low and sharp, and cut the frown in one steady arc so the grump reads clearly from across the street.
Triangle Eyes and Long O Mouth
Two crisp triangle eyes sit above a tall oval mouth frozen mid-gasp, the three-hole formula that has decorated doorsteps for generations. All three shapes cut straight through, so the whole face can be finished in minutes, making it the ideal last-minute design. Cut each triangle with three straight strokes that overlap slightly at the corners so the points pop out cleanly.
Triangle Eyes and Six Diamonds
This elevated take on the traditional face pairs slanted triangle eyes topped with thin brow slits, a triangle nose, and a deep zigzag grin, then adds three small diamond cutouts on each cheek for extra sparkle. Every element is pierced through the wall. The brow slits and little diamonds are what push it to medium; cut the big shapes first, then handle each diamond with a narrow saw, working point to point so they stay crisp.
Triangle Eyes and Twin Teeth
The timeless jack-o'-lantern: two bold triangle eyes, a matching triangle nose, and a wide friendly smile with two square teeth breaking the curve. Every feature is cut fully through, leaving the rest of the pumpkin smooth so the glowing shapes do the talking. Straight lines make this an ideal easy carve; score the triangles with a ruler edge first and the cuts will fall right in place.
Triangle Face and Lower Teeth
The most traditional face in the patch: two triangle eyes, a triangle nose, and a wide smile interrupted by two square teeth rising from the lower lip. All five shapes cut straight through with no curves to fight, making this an ideal first carve. Push the saw in straight vertical strokes and finish each triangle corner cleanly from both sides before popping the piece out.
Triangle Ring and Jagged Grin
An ornate expert-level face framed by a full ring of small triangle cutouts circling the pumpkin, with chevron-crested brows, barred flame-shaped eyes, a diamond nose, and a huge jagged grin holding fourteen zigzag teeth. Everything pierces through, so the finished lantern sparkles from every angle like carved lace. Plan your order: punch the border triangles first while the wall is rigid, then work inward, saving the long fragile grin for the very end.
Trick or Treat Pumpkin Stencil
A bold typographic pumpkin stencil spelling out TRICK OR TREAT in three stacked lines of wide block stencil letters, each character separated by narrow bridges that keep the letterforms readable when carved through. The large open interiors of the letters glow with even, full-face brightness when lit. Cut enclosed letter counters, the circular center of the R and the inside of the O, before removing the surrounding letter bodies, so those islands stay in position while you work.
Turnip Triangle Surprise Face
A nod to the original Irish lanterns: a simple startled face with two triangle eyes and a small arched mouth, designed to suit a turnip, rutabaga, or small pale pumpkin. All three openings cut straight through the wall. Root vegetables are much denser than pumpkins, so hollow the inside generously first and use short, firm saw strokes; on a regular pumpkin this carves in minutes.
Twin Crescent Eyes and Smile
This vintage-style face uses two curved crescent eyes that seem to squint with delight, a small triangle nose, and a broad smile interrupted by one chunky hanging tooth. Every shape cuts fully through the wall, and the pieces are large enough that a keyhole saw handles them easily. Cut the inner curve of each crescent first so the thin points at the tips release cleanly without tearing.
Two Dice & Pawn Game Path
A game-night tribute showing two tumbling dice with action lines beside a classic rounded game pawn, all sitting on a curving track of board spaces. The whole scene is skin-shave shading: you peel the rind away inside each shape while the wall stays solid, so the design shows as pale relief in daylight. For this hard piece, outline every shape with shallow score cuts first, then peel, keeping the dice pips crisp and round.
Two Lower Teeth Smile
This cheerful jack-o'-lantern face pairs two big round eyes with a wide open grin interrupted by a pair of goofy buck teeth. The eyes and mouth are cut all the way through, while the two square teeth are left attached to the top lip. Since it is an easy carve, just take care around those teeth: cut the mouth opening around them and leave each tooth anchored so it does not snap off.
Two Profiles Within a Heart
A large heart is cut out of the pumpkin, but two facing profiles are left standing in the middle of the opening, so a couple appears to lean toward each other in silhouette against the glow. The heart interior is removed while the joined profile column stays attached at the bottom point. This is a hard carve because those noses, lips, and chins are thin; use a fresh fine blade and cut away from the profiles, never into them.
Uneven Eyes and One-Tooth Grin
A timeless porch-ready jack-o'-lantern with two slightly uneven oval eyes, a small triangle nose, and a long friendly smile broken by a single square tooth. All four openings are generous cut-through shapes, so beginners can saw steadily without worrying about fragile bridges. Angle your blade slightly outward as you cut so each piece pops free toward you and the glow spreads wider at night.