25 Awesome Classic Pumpkin Stencils

We curated 25 of the very best awesome classic pumpkin stencils so you can pick one and start carving in minutes.

1. Four Sails Above Three Waves
A pirate ship rides three rolling waves, its mast carrying four billowing sail panels and a small flag snapping at the top. The sails, hull, flag, and waves are all cut through, while the mast and yard lines are strips of rind left between the openings to hold the rigging together. Those mast strips make it a medium carve: cut the four sail windows one at a time, always slicing away from the mast strip so you never lever against it.
See template →
2. Wink and Five Rounded Gaps
One eye is a jaunty upswept crescent wink while the other stays a wide triangle, set over a small diamond nose and a lopsided grin broken into five rounded gaps by chunky teeth. The eyes, nose, and mouth gaps are cut through, leaving the tooth shapes as attached skin between them. A medium carver should cut the five mouth gaps individually rather than one big mouth, which keeps every tooth solidly connected and the crooked smile intact.
See template →
3. Triangle Eyes and Six Diamonds
This elevated take on the traditional face pairs slanted triangle eyes topped with thin brow slits, a triangle nose, and a deep zigzag grin, then adds three small diamond cutouts on each cheek for extra sparkle. Every element is pierced through the wall. The brow slits and little diamonds are what push it to medium; cut the big shapes first, then handle each diamond with a narrow saw, working point to point so they stay crisp.
See template →
4. Witch on a Left-Brushed Broom
A witch in a pointed hat rides her broom across the pumpkin, cloak trailing and broom bristles brushed out to the left as one bold glowing silhouette. The entire figure is cut through as a single connected opening, so the drama comes from the outline rather than fine interior detail. For this medium carve, start with the big body mass and work outward, cutting the hat point and individual bristle tips last so the surrounding rind supports your blade the whole way.
See template →
5. Seven-Rib Shell and Three Dots
A fan-shaped scallop shell spreads seven glowing ribs from a hinged base, crowned by three small round dots floating above like sea spray. Each rib is its own cut-through opening separated by strips of intact wall, so the shell keeps its elegant ridged look when lit. Cut the center rib first and work outward symmetrically, keeping the dividing strips at least a finger-width so the fan stays strong.
See template →
6. Almond Eyes and Seven Teeth
A wide, low jack-o'-lantern face with sly almond-shaped eyes, a small triangle nose, and a long jagged mouth packed with alternating square teeth top and bottom. Everything is pierced through, and the horizontal layout suits squat, wide pumpkins. At medium difficulty the tooth row is the main work; cut the mouth's outer outline first, then remove the gaps between teeth one at a time so each block keeps support while you work.
See template →
7. Left Wink and Six Cheek Wedges
A playful winking jack-o'-lantern: one big round open eye, one arched wink, a triangle nose, and a smiling mouth with blocky teeth, all framed by three thin whisker-like wedges slashed across each cheek. Every opening is cut through, and the six cheek wedges throw extra slivers of light. At medium difficulty, cut the large features first and finish with the skinny cheek slits, using a fine saw so each wedge tapers to a clean point.
See template →
8. Seven Stars in a Winding Trail
Seven five-pointed stars of varying sizes wind down the pumpkin in a gentle S-curve, like a constellation trailing across the night sky. Each star is a full cut-through opening, so the finished lantern twinkles from every angle. Star points are where beginners slip, so cut each arm from the outer tip inward toward the center and let the cuts meet, which keeps all five points sharp on every star.
See template →
9. Arched Eyes and Six Freckles
A vintage-style pumpkin face with tall arched eyes, a triangle nose, a gap-toothed smile, and six little freckle holes dotted across the cheeks. The eyes, nose, mouth, and freckles all cut through, and each eye keeps a rooted pupil tab attached at the bottom for old-fashioned character. Drill or poke the freckles first with a small round tool, and cut toward each pupil tab's base so those thin anchors survive.
See template →
10. Five Stars Around a Crescent
A crescent moon anchors one side while five stars and a scattering of small round dot holes twinkle across the rest of the pumpkin like a busy night sky. Every element is cut through, and the pattern wraps wide, which suits a bumpy or warty pumpkin beautifully. The medium rating comes from the sheer count of pieces, so drill or punch the little dots first as reference points, then carve the stars and finish with the big crescent.
See template →
11. Crescent Seven Stars Six Dots
A large crescent moon glows at the left while seven chunky five-point stars and six round dots scatter across the rest of the pumpkin like a full night sky. Every moon, star, and dot is pierced through, so the whole surface twinkles when lit. Space your cuts out as you go, alternating sides of the pumpkin, so the wall keeps its strength until the final star is freed.
See template →
12. Moon with Five Stars and Dots
A large crescent moon anchors the center of the pumpkin while five stars and a sprinkling of small round holes orbit around it. Every element is pierced through the wall, so the finished carve reads as a glowing night sky from across the yard. Carve the crescent first since it is the largest opening, then add the stars, sawing each point from the tip toward the center for clean corners.
See template →
13. Crescent and Eight Stars
A large crescent moon curves along one side of the pumpkin while eight stars of varied sizes scatter across the rest of the face. Moon and stars are all cut-through openings, turning the pumpkin into a bright celestial lantern with plenty of glow for a dark porch. Eight stars push this to a medium carve simply on repetition, so rotate the pumpkin as you go and cut every star point with a pull stroke toward the center for clean tips.
See template →
14. Crescent and Four-Ray Sun
A tall crescent moon pairs with a four-ray sun whose points frame a solid circle of rind at its center, creating a striking celestial emblem. The crescent and the four triangular rays are pierced through, while the sun's middle disc stays attached as a floating island of pumpkin skin. At medium difficulty, cut the four rays individually and avoid nicking the center circle's edge, since that untouched disc is what makes the sun read.
See template →
15. Three Crescents and Five Stars
Three crescent moons stack down the center of the pumpkin, each curving the same direction, with five little five-point stars scattered around them like a night sky. Every moon and star is cut cleanly through, so the whole face twinkles once the candle is in. A pleasant medium carve; punch the small stars first with a detail saw, then cut each crescent from the inner curve outward to keep the horn tips sharp.
See template →
16. Three Stars and Six Dots
Three five-pointed stars descend in a vertical column, each one paired with small round dots scattered alongside like sparkling companions. Designed for tall, narrow pumpkins, every star and dot is a clean cut-through opening that fills the height of the fruit with light. Poke the dots first, then cut each star from its center outward toward the points so the tips stay sharp and intact.
See template →
17. Sloping Eyes and Unequal Fangs
A classic evil jack-o'-lantern with steeply slanted triangle eyes glaring downward and a wide jagged mouth of uneven fangs, some long and some short for extra menace. All shapes are pierced through for a fiery glow. Rated medium because of the zigzag mouth; cut each fang point with two clean strokes meeting at the tip, and bevel the eye edges outward so more light escapes upward.
See template →
18. Cross With Ten Rays
A bold cross anchors the center of the design while ten tapered rays burst outward around it like beams of light. The cross and every ray are pierced through, leaving dark shell between them that frames the radiating pattern. Cut the large cross first to relieve pressure on the wall, then work each ray from its wide outer end toward the narrow tip so the points finish clean.
See template →
19. Angular Seven-Tooth Grin
A sharp-edged jack-o'-lantern face with slanted triangle eyes, an angular nose, and a wide jagged mouth broken into seven pointed teeth. Every shape is cut straight through the pumpkin wall, making a bright, high-contrast face that reads perfectly from the porch steps. It is a medium pattern because of the many small tooth points, so saw into each corner from both directions instead of twisting the blade to keep the tips sharp.
See template →
20. Brows and Six Cheek Dots
A classic jack-o'-lantern face with slanted triangle eyes topped by separate angled brow cuts, a diamond nose, and a wide grin broken by six blocky teeth, plus three small round holes dotting each cheek. Every element is cut fully through so the whole face blazes at night. A solid medium project; drill or punch the cheek dots first while the wall is strongest, then saw the eyes, brows, and mouth.
See template →
21. Arched Eyes and Seven Slots
This cheerful face pairs tall arched eyes, each with a round pupil left attached at the top, with a triangle nose and a huge grin broken by seven tooth slots. The eyes, nose, and mouth are pierced while the pupils and tooth bars remain as connected shell. The attached pupils are the trickiest part, so cut around each one carefully and leave a generous bridge so they stay anchored.
See template →
22. Sleeping Moon, Stars & Cloud
A sleepy crescent moon with a gentle closed-eye face drifts above a puffy cloud, with two twinkling stars floating at its side. Most of the design is shaded by shaving the skin so the moon and cloud glow softly, while the stars can be etched to match. Keep your shave shallow on the facial features, going just deep enough on the eyelid and lips that they read as darker lines.
See template →
23. Notched Brows and Jagged Grin
A characterful jack-o'-lantern with heavy notched brows sitting over sly almond eyes, and a huge open mouth whose top edge is a row of jagged zigzag teeth above a broad curling lower lip. Eyes, brow slits, and the mouth are all pierced through for a bright, expressive glow. At medium difficulty, the key move is cutting each zigzag tooth point cleanly; slice into every corner from both directions instead of turning the blade.
See template →
24. Maine State Shape
Maine's craggy outline fills the pumpkin as a single glowing cutout, from the pointed northern crown down to its famously jagged coastline. The entire state interior is removed while the rind around it stays solid, so the border reads crisply once lit. The ragged coastal edge is what makes this a medium carve: trace it slowly with a fine saw and do not worry about tiny inlets, since the overall shape sells the design from a few feet away.
See template →
25. Arched Brows and Single Tooth
A wholesome grinning face with arched eyebrows, round eyes that keep their pupils as uncut dots, a small triangle nose, and a big open smile showing two square teeth. The brows, eye rings, nose, and mouth are pierced through while the pupils and teeth remain as attached pumpkin. Cut the eyes slowly so each floating pupil keeps a solid connecting bridge to the shell.
See template →