50 Cool Pumpkin Carving Patterns
50 printable cool pumpkin carving patterns — ready to download, trace, and light up the porch.
1. Wisconsin Pumpkin Stencil
Wisconsin's distinctive outline fills the center of this pumpkin stencil, its jagged northern coastline and small Door Peninsula peninsula cut cleanly away to glow as a single solid state shape when lit. The entire interior of the state boundary is pierced through, casting a bold Wisconsin silhouette in light against the dark pumpkin. Score the sharp indentations along the Lake Superior shoreline slowly, since those tight interior corners are where the blade most easily wanders and widens the cut.
See template →2. Winged Heart Pumpkin Stencil
A large heart with feathered wings spread wide anchors this hard pumpkin stencil, with a scrolling banner ribbon below carrying decorative curl accents. The heart is kept solid as pumpkin flesh while the wing feather gaps and banner interior are cut through, creating a tattoo-style composition that glows with intricate layered detail. The individual feather separations along each wing are narrow and numerous; carve them starting at the outermost wingtip and working toward the heart so the wing stays attached to the body of the pumpkin longest.
See template →3. Rocket and Stars Pumpkin Stencil
A retro rocket ship blasting diagonally upward through a field of five-pointed stars fills this easy pumpkin stencil. The rocket body is a large solid pierce-through with a small circular porthole cut from its center, and two swept fins angle beneath it; six stars of varying sizes are scattered across the field. Lit from within, the rocket and stars all glow as bright cut-out shapes. Cut the small circular porthole in the rocket body before removing the rocket silhouette itself, since that circle is far easier to score cleanly while the surrounding wall has full support.
See template →4. Tiger Face Pumpkin Stencil
A full-face tiger portrait stares forward from this expert-level pumpkin stencil: the broad round head is ringed by a jagged fur ruff, two triangular ears with inner cutouts peek from the top corners, and the face is built from dozens of interlocking stripe-shaped cutouts that form the eyes, nose bridge, muzzle, and whisker spots. The lit result shows a photorealistic tiger rendered entirely in positive pumpkin bridges and negative glowing gaps. Work from the center of the face outward, cutting the small eye-iris pieces first before tackling the radiating stripe cuts that hold the whole design together.
See template →5. Male Portrait Pumpkin Stencil
A male portrait rendered in spare, angular linework fills this hard pumpkin stencil: a large angular head shape, a distinctive widow's peak hairline, deep-set eye sockets with small cutout irises, a long straight nose, and a square jaw with a chin dimple. The design uses wide open negative shapes separated by just a few thin structural bridges, so the lit portrait reads as a bold, high-contrast face. The narrow bridge between the nose and the upper lip is the most vulnerable point, so score it lightly before making any cuts on either side of it.
See template →6. Farm Tractor Pumpkin Stencil
A side-view farm tractor fills this hard-level pumpkin stencil: a large rear wheel with a circular hub and cross-spoke cutouts, a small front wheel with a curved fender, a boxy cab section with cut-out windows, a squared hood, and a vertical exhaust stack. The rear wheel dominates the lower half of the composition and has the most intricate internal detail. Cut the cab windows and exhaust stack openings first while the pumpkin is still fully intact, then work on the large rear wheel spokes last, since removing them will flex the surrounding skin considerably.
See template →7. Pirate Pumpkin Stencil
A grinning pirate face topped by a tricorn hat is the subject of this hard pumpkin stencil: a skull-and-crossbones badge on the hat brim, a round-brimmed hat spreading wide, a leather eye patch over one eye, a weathered face with deep laugh lines, a broad toothy smile, and a pointed goatee at the chin. The lit design reveals a cheerful swashbuckler portrait full of character. Cut the small skull-and-crossbones elements on the hat first while the surrounding skin is firm, then work down through the face, saving the wide hat brim last.
See template →8. Monster Truck Pumpkin Stencil
A side-view monster truck with massive knobby tires dominates this expert pumpkin stencil: two oversized wheels with five-spoke rims, a high-clearance suspension chassis visible between the tires, a boxy cab with window cutouts, a wide front bumper, and flame or dragon graphics on the door panel. The many narrow bridges connecting the chassis rails and the spoke details inside each wheel make this a demanding carve. Cut the interior cab windows and bumper slots first, then tackle the five spokes of each wheel one at a time, always working away from the thin axle hub at the center.
See template →9. Ninja Warrior Pumpkin Stencil
A stocky ninja warrior in a fighting stance holds a broad katana raised overhead in this easy pumpkin stencil. The figure is nearly a solid silhouette pierce-through, with just a few interior slots carved at the belt sash and the chest opening to add definition. The diagonal sword blade extends well above the head, making it the widest point of the design. Transfer the sword line with care and cut it in a single continuous stroke so the blade stays perfectly straight when lit.
See template →10. Bearded Man Portrait Pumpkin Stencil
A bearded man shown from chest up is rendered in this expert pumpkin stencil with fine portrait linework: tousled spiked hair, narrow cut-out lines for expressive eyes with visible irises, a trimmed goatee built from small isolated patches, an open jacket collar, and a table or surface line at the bottom. The face relies on dozens of thin pumpkin bridges to hold the portrait together, creating a detailed likeness when lit. Carve the small goatee patches and eye details first, before the larger jacket and background cuts are made, to keep the face area stable throughout.
See template →11. Man Portrait Pumpkin Stencil
A scowling man's portrait rendered in tight linework stares out from this expert pumpkin stencil, one hand raised in a defiant gesture with a skeleton hand overlaid on it, the figure's jacket and muscular build conveyed through angled slash cuts below the face. The design relies on many small interior cuts to build the facial features, making it a demanding carve. Tackle the densely detailed face first, cutting the brow wrinkles, nostril, and lip cuts before opening any of the larger torso voids.
See template →12. Peace Sign Pumpkin Stencil
A large peace sign fills the pumpkin face in this easy pumpkin stencil: a bold outer ring interrupted by four gaps, a vertical center bar, and two diagonal lower bars all pierced through, with the spaces between them staying solid. When lit, the candlelight glows through the ring segments and the three bar slots, mapping the familiar peace symbol in orange light. Because the ring has four gaps that nearly isolate four arc sections, cut the two lower arcs last to keep them braced while the upper cuts are made.
See template →13. Pirate Skull Pumpkin Stencil
A grinning pirate skull wearing a broad tricorn hat dominates this expert-level pumpkin stencil, with a second miniature skull-and-crossbones badge emblazoned on the hat brim. Dense cutwork in the teeth row, eye sockets, and hat badge creates many small isolated pieces held together by narrow bridges of pumpkin flesh. Begin with the tiny crossbone details on the hat badge while your hands are freshest, then move to the eye sockets and finally the toothed lower jaw.
See template →14. Rainbow Arch Pumpkin Stencil
Five concentric rainbow arcs are centered on this pumpkin stencil, each band separated by a narrow uncut strip so the finished jack-o-lantern glows with layers of orange between bands of dark. The arcs are wide and smoothly curved, making every cut a long gentle sweep with no tight corners. To keep all five bands from sagging after carving, work from the innermost arc outward so the outer wall stays thick and supportive while you remove each layer.
See template →15. Pirate Skull with Parrot Pumpkin Stencil
A weathered pirate skull in a battered tricorn hat stares out from this expert pumpkin stencil, a parrot perched on the skull's head and tattered coat lapels framing its hollow cheeks. The skull-and-crossbones badge on the hat, individual finger bones along the bottom, and ragged coat edges create dozens of intricate cut sections. Carve the small hat badge first, then the interior face hollows, before moving outward to the flowing coat edges where the thinnest bridges live.
See template →16. Lion Head Pumpkin Stencil
A majestic lion's head fills this pumpkin stencil from edge to edge, its full flowing mane rendered in sweeping curved cuts that radiate outward like flames, with the face centered and features defined by pierced nostrils, brow lines, and an open lower jaw. Lit from inside, the solid orange pumpkin forms the mane and facial structure while the cut gaps create the dramatic shading between mane locks. Begin carving in the outermost mane tips, where cuts are shortest, and work inward toward the face so the central wall remains stable while you navigate the most intricate facial detail cuts.
See template →17. Queen Portrait Pumpkin Stencil
An elderly queen in full regalia looks forward from this pumpkin stencil, her curly hair framing a detailed face with distinct brows, eyes, and lips, topped by an ornate crown bearing a cross, leaf shapes, and decorative elements. The portrait is built from dozens of small and medium cut sections across the hair, face, and jeweled bodice, with thin orange bridges holding the likeness together. Begin with the smallest crown ornament shapes at the very top before moving to the face, since removing the large hair sections early would flex the wall and risk tearing the delicate facial bridges.
See template →18. Motorcycle Pumpkin Stencil
A side-profile motorcycle fills this hard pumpkin stencil with mechanical detail: the front fork and handlebars, a sculpted fuel tank, streamlined seat fairing, and two large concentric-ring wheels. The design uses a mix of solid pumpkin bridges and open cut areas so the bike reads as a crisp silhouette when the jack-o-lantern is lit. The thin fork tubes and the thin strip separating the seat from the rear fairing are the most fragile elements. Carve the two large wheel ring sections first to establish the bottom of the composition before working inward through the frame details.
See template →19. Great Horned Owl Face Pumpkin Stencil
A fierce great-horned owl face looms forward in this expert pumpkin stencil, with two large almond-shaped eye cavities framed by heavy curved brow ridges, a sharp pointed beak at center, ear tufts sweeping upward and outward, and dense spiky feather tips radiating outward from the face. The background within each eye cavity and around the brow is cut away in multiple sections, while the beak, brow ridges, and outer feather spikes stay solid as orange bridges. Begin with the eye cavities early to anchor symmetry, then cut the spiky outer feather tips last since they are the most likely to snap.
See template →20. Handlebar Mustache Pumpkin Stencil
A wide, curling handlebar mustache is the sole design element of this introductory pumpkin stencil, carved as a single large open shape that sweeps across the pumpkin face. The ends curl upward and outward in tight spirals, while the center dips in a gentle U. The entire mustache is pierced through as one connected opening, so the glow reads as a bold, immediately legible silhouette. Because the cut is one continuous piece, score the center dip first and work outward toward each curled tip to keep the shape from shifting as material is removed.
See template →21. Cruise Ship Pumpkin Stencil
A large cruise ship viewed from a slight bow-angle fills this hard pumpkin stencil. Four tall rectangular smokestacks rise from the upper deck, the bridge superstructure runs along the top, and five circular portholes line the hull below the waterline. The design reads as a series of rectangular and circular cutouts separated by solid pumpkin strips. When lit, the port holes and superstructure windows glow individually like a ship at sea. Carve the five round portholes first since circular cuts benefit most from a fresh blade, then work upward through the rectangular deck openings.
See template →22. Flying Saucer Pumpkin Stencil
A classic flying saucer seen from a three-quarter angle fills this hard space pumpkin stencil. The domed cockpit on top, the wide flat disc with a raised rim, three small round indicator lights on the underside, and three diverging tractor-beam rays below all read clearly as carved shapes. The beam rays are solid pumpkin strips between large open triangular cutouts, so lit from inside the beam glows as three bright triangular shafts pointing downward. Carve the three beam triangles first since they are the largest open areas, then work upward through the disc details and finish with the small circular indicator lights.
See template →23. Maryland Pumpkin Stencil
Maryland's instantly recognizable outline appears as a single cut-through silhouette on this pumpkin stencil, showing the state's wide rectangular body, the deeply indented Chesapeake Bay notch along the right side, the narrow Eastern Shore peninsula, and the small western panhandle extending to the left. Because the Bay notch splits the right edge into two separate lobes, the wall between them is slender. Cut the inner Bay-notch corners first using a pointed blade so that delicate section doesn't flex and tear while you remove the larger open areas.
See template →24. Rearing Horse Pumpkin Stencil
A powerful horse rears up on its hind legs in this detailed pumpkin stencil, its flowing mane and arched neck rendered in sweeping cut-through lines while the body remains largely solid orange. Thin bridges of pumpkin between the leg cuts and the belly keep the composition intact, so light escapes in dramatic slashes rather than one big opening. Cut the fine mane strands at the top first before tackling the larger body sections, to avoid flexing those delicate cuts while the rest of the work is underway.
See template →25. LGBTQIA2S+ Heart Pumpkin Stencil
A large bold heart silhouette is the main shape, with the text "LGBTQIA2S+" set in thick stencil letters running horizontally across the heart's center. The heart is cut in two halves separated by the text band, which itself is cut through except for the letter bridges. Lit from inside, the whole heart glows with the text reading as solid orange stripes across the opening. Carve the upper and lower heart halves before the text strip to keep the letter bridges from tearing while the wall is still reinforced.
See template →26. Crescent Moon Pumpkin Stencil
A crescent moon shape faces left, its body filled with a texture of small irregular cut-out marks that suggest the pitted surface of the moon, while a faint face profile is visible along the inner curve of the crescent. The large crescent itself is the main pierced shape, and the small interior texture dots pepper the body, creating a glowing stippled effect when lit from inside. To keep the many small interior marks from causing the crescent body to crumble, carve the outer crescent boundary first, then pick out the texture dots from largest to smallest using a small round drill bit or detail blade.
See template →27. Mountain Wolf Scene Pumpkin Stencil
This expert-level pumpkin stencil presents a layered wilderness panorama: jagged mountain peaks and a partially obscured moon sit above a mid-ground of ridgelines, while the foreground holds a row of spiky pine trees and a tiny howling wolf on a plateau. Dozens of separate cut-through shapes at varying scales build depth across the whole composition. Tackle the tiny wolf and the narrowest tree spires first, as those fragile points are easiest to cut cleanly before surrounding sections are removed and the pumpkin wall softens.
See template →28. LOVE Block Pumpkin Stencil
"LOVE" is arranged in a two-by-two block format, with "LO" on the top row and "VE" below, echoing the famous Robert Indiana sculpture. Each letter is cut through in rounded, chunky sans-serif type and the four characters together form a near-square composition. The internal counters of the "O" and the enclosed angle of the "V" need to be freed as islands; carve those interior pieces before removing the surrounding letter bodies so they stay fixed in place by the adjacent wall material.
See template →29. USA Map Pumpkin Stencil
The contiguous United States is carved as a single large pierced shape, with the internal state borders rendered as narrow solid ridges that remain after cutting away all the negative space inside each state. Alaska and Hawaii appear as separate inset shapes below the main landmass. When lit, each state glows individually, separated by hairline orange lines. The narrow state borders in the Northeast are the most fragile: carve those tiny states before removing the surrounding pumpkin wall so you have maximum support.
See template →30. Locs Portrait Pumpkin Stencil
A close-up portrait of a man with long twisted locs, rendered in bold cut-through shapes that frame his eyes, cheekbones, and jaw in dramatic silhouette. The face is built from large negative spaces separated by solid orange bridges, so candlelight floods the features when lit. Start by cutting the forehead and cheek openings first; leave the thin vertical bridge between the nose and mouth intact until last to prevent the whole face from sagging during carving.
See template →31. Jolly Roger Pumpkin Stencil
A classic Jolly Roger composition fills this hard pumpkin stencil: a large tricorn pirate hat at the top with an X emblem on its band, a grinning skull face below with oval eyes and a row of small separated teeth, and two crossed cutlass swords extending diagonally from behind the skull. The swords are cut as wide open shapes that frame the face, while the skull's eye sockets and the gaps between each tooth are the smallest, most fragile details. Carve the broad sword shapes first to release the large areas of pumpkin skin, then work inward to the fine tooth gaps using a narrow pointed blade.
See template →32. I Love Arkansas Pumpkin Stencil
The Arkansas stencil uses the standard "I Love" pumpkin layout: a block I, a full heart, and the two-letter abbreviation AR in rounded type. Both letters are open silhouettes with no interior counters, making this a clean, beginner-friendly carve with four distinct glowing shapes. The R's open leg curves slightly inward, so trace it with a pin tool before cutting to confirm the exact endpoint of that stroke before committing the blade.
See template →33. Cowboy Skull Pumpkin Stencil
A grinning cowboy-hat skull faces three-quarters toward the viewer, its wide-brimmed hat battered and torn along the crown. Hollow eye sockets and an open jaw with individually delineated upper and lower teeth are pierced through, while the hat brim, cheekbones, and nose cavity form a complex arrangement of solid bridges. Flame wisps curl at the chin. When lit, the teeth row and eye sockets glow against the dark skull mass, creating a hard-boiled undead outlaw look. Cut each tooth gap individually rather than sweeping through the whole row to keep the ridges crisp.
See template →34. Flaming Skull Pumpkin Stencil
A compact cartoon skull wearing a crown of jagged flame spikes fills this pumpkin stencil, its round head showing two circular eye sockets, a small curved smile, and a row of three square teeth below, all surrounded by an aggressive ring of pointed flames and lightning-bolt tabs. The flames and most features are pierced-through openings, leaving solid bridges between the skull face and the outer flame ring. Cut the small oval and teardrop-shaped flame scatter pieces at the very top first, then work down through the zigzag flame ring before tackling the skull face openings, to keep the narrow bridges between flames intact as long as possible.
See template →35. Flexed Bicep Emoji Pumpkin Stencil
A muscular arm bent at the elbow in the classic flexed-bicep emoji pose fills this easy emoji pumpkin stencil, with the large upper arm and forearm cut away as open voids and the thin wrist and elbow-crease lines left as pumpkin-skin bridges. The two sections of the arm void are separated by the elbow-crease bridge, which is the slimmest part of the design. Carve the forearm section below the crease first, then remove the upper arm, so the crease bridge is never cut from two sides at once.
See template →36. Alien Pumpkin Stencil
An extraterrestrial figure with an oversized oval head, large almond-shaped eyes, delicate facial features, and a lean torso covered in fine ribbed line-work fills this expert-level pumpkin stencil. The alien holds up one three-fingered hand in a peace sign, and the entire upper head is decorated with small curved slash marks suggesting brain-like texture. Each fine interior line across the torso and head must be cut precisely to retain the many thin bridges that keep the design from collapsing. Cut the small curved head-texture marks first before any large area is removed, as they rely on a full wall for support.
See template →37. Dollar Sign Pumpkin Stencil
A bold dollar-sign symbol fills the center of this pumpkin stencil, its curved S-shape and two vertical bar segments carved through entirely so candlelight blazes through the open silhouette. The thick outer outline stays solid, holding the shape firmly on the pumpkin wall. Because the two short horizontal bars at top and bottom are separate cut-outs, cut those small pieces first before tackling the large curved body so the surrounding wall stays supported throughout.
See template →38. Eiffel Tower Pumpkin Stencil
The Eiffel Tower fills this easy pumpkin stencil as a symmetrical stack of horizontal rectangular cutouts that grow wider toward the base, with a pointed antenna tip at the top, paired diagonal leg sections, and a large arched base opening at the bottom. All the horizontal bars and the arch are pierced through while the thin vertical struts between them remain solid. Work from the antenna tip downward, cutting each horizontal bar in turn, so the struts stay braced by the surrounding uncut skin until the very last base arch is removed.
See template →39. Bigfoot Pumpkin Stencil
A full-body Bigfoot figure strides confidently to the right on this hard-difficulty pumpkin stencil, rendered in a chunky outline style with shaggy fur edges, a broad face with heavy brow ridges and small eyes, swinging arms, and large flat feet. The body outline and fur texture gaps are all pierced, while a central vertical strip of skin connects the figure's torso to the pumpkin background on each side. Preserve the narrow fur-edge bridges along the arms by cutting inward from the outer contour rather than slicing along the bridge line itself.
See template →40. Eastern Dragon Pumpkin Stencil
A highly detailed Eastern-style dragon in a crouching, four-legged stance fills this expert pumpkin stencil, with a horned and whiskered head, rows of dorsal spines, a scaled underbelly rendered as oval cutouts along the torso, clawed feet, and a coiling tail with a spiral tip. An intricate network of thin bridges holds the isolated scale ovals and spine shapes in place. Work from the outermost tail spiral inward, and cut the tiny dorsal spine gaps only after all larger surrounding areas are removed, so the skin doesn't flex and crack prematurely.
See template →41. Cartoon Dragon Pumpkin Stencil
A cartoon-style dragon stands upright with a crested head, open toothy grin, round eye, segmented belly, and a curling tail, all rendered in a chunky outline style on this pumpkin stencil. The body outline, crest spines, and scattered limb shapes are pierced through, while narrow bridges at the belly segments and tail curl remain solid to hold the design together. Cut the largest body cavity first, then the outer wing and limb fragments; save the tiny belly-rib slits for last so the structure stays rigid while you finish the surrounding cuts.
See template →42. E=MC2 Pumpkin Stencil
Einstein's famous equation is carved as bold block letters spelling E = MC2 across this easy pumpkin stencil, with the superscript "2" rendered in smaller fragments to the upper right of the C. Each letter is a chunky stencil-style cutout with internal bridges holding counter shapes such as the horizontal bars inside the E. The superscript "2" has two small separate island pieces; cut the main letters first and save those two small fragments for last so they don't shift before the surrounding skin is stable.
See template →43. Swift in Flight Pumpkin Stencil
A swift in full dive displays wide-spread wings and a deeply forked tail in this bird pumpkin stencil, its entire silhouette carved as one large open shape. The wing tips show a ragged, feathered edge that gives the design energy when lit; that serrated border is the most fragile detail. Score those feathered wingtip notches with short, shallow plunge cuts before removing the main wing mass, so the delicate points separate cleanly rather than tearing.
See template →44. Saturn Pumpkin Stencil
Saturn's ringed profile rendered in a loose, sketchy style fills this expert space pumpkin stencil, with the planet body shown as a series of jagged horizontal band cuts and the elliptical ring system sweeping through as two curving arcs, all separated by thin skin bridges that suggest atmospheric cloud layers. The ring bands are the trickiest element: each arc is a narrow, isolated strip that connects to the planet body only at two small points. Cut the planet body bands first, working from the equator outward toward the poles, then carefully score the ring arcs from their inner connection points toward the outer tips.
See template →45. Flying Saucer Pumpkin Stencil
A flying saucer pumpkin stencil with a domed upper hull made of stacked horizontal band segments separated by narrow orange ribs, creating a layered effect that suggests a ringed spacecraft in profile. The bands alternate between cut and solid, so when lit the saucer appears to glow with horizontal light stripes rather than as a flat shape. Cut the widest central band first to anchor your position, then work upward band by band toward the dome, keeping each thin rib intact so the layers do not collapse mid-carve.
See template →46. Crescent Moon and Star Pumpkin Stencil
A large crescent moon curves across most of the design while a single five-pointed star sits nestled in the open interior of the crescent in this easy space pumpkin stencil, both shapes carved as open silhouettes. The crescent is a large single cut, and the small star inside it is a separate isolated piece that must be removed independently. Cut the star's five points with precise plunge cuts at each tip before slicing the connecting straight sides, then remove the star before carving the surrounding crescent so your hand has room to maneuver.
See template →47. Einstein Portrait Pumpkin Stencil
An Albert Einstein portrait pumpkin stencil rendered in bold linework: wild tufts of windswept hair radiate from both sides, deeply set eyes under heavy brow lines, a rounded nose, and an open mouth with the tongue sticking out. The linework approach leaves the face mostly solid orange with thin cut lines defining the wrinkles, hair tufts, and collar diagonals below, so the finished pumpkin reads as a recognizable portrait even in dim light. Cut the hair tufts from the tips inward toward the head to reduce leverage on those fragile points.
See template →48. Witch with Staff Pumpkin Stencil
A robed witch stands arms wide inside a large circular moon, gripping a tall staff crowned with a starburst, while jagged flame shapes rise from the ground at her feet in this expert-level witch pumpkin stencil. The large moon disc is pierced open, and the witch figure is left as a solid pumpkin-skin silhouette within it, creating a glowing halo effect around her when lit. The staff is the most isolated element, connected to the composition only by a thin wrist bridge, so leave it uncut until every surrounding section is finished.
See template →49. Cool Dude Sunglasses Pumpkin Stencil
A cartoon face with swept-back windswept hair, heavy brow, and large wraparound sunglasses fills this hard halloween pumpkin stencil, the lenses, hair wisps, and facial contours all rendered as separate cut sections connected by thin skin bridges. Lit from inside, the open sunglasses lenses glow brightly while the raised brow and cheek lines stay solid, giving the face a streetwise, sunlit look in reverse. The thin strands of hair near the temple are the most fragile bridges, so cut them after all the larger facial sections are removed.
See template →50. Carbon Element Pumpkin Stencil
A periodic-table tile for carbon (element 6) fills the stencil: a rounded-corner square border frames a large bold letter C with an interior negative crescent carved away, the atomic number 6 in superscript at the upper right, and the word "carbon" in lower-case across the bottom. The border, the C glyph, the numeral, and the text letters are all pierced through. Lit from within, the design reads as a glowing science reference card. Leave the thin horizontal shelf of pumpkin skin between the C body and the "carbon" text block intact until all the letter-O counters in "carbon" are punched out.
See template →
Pick one, print it, carve it. 50 cool pumpkin carving patterns should be enough for any porch.
Browse all pumpkin carving patterns →