DIY Witch Pumpkin Carving Patterns
Looking for diy witch pumpkin carving patterns? You're in the right place. Print at 100% scale, tape it to your pumpkin, and poke through the lines with a pin.
Preview the design and choose one that matches your carving experience.
Howling Wolf Moon Pumpkin Stencil
A wolf howling at a large crescent-shaped moon fills this hard pumpkin stencil, with a trio of jagged pine trees to the left and the wolf's body set as a solid orange silhouette inside the open pierced moon arc. The moon itself is the glowing background that frames the wolf and trees, while the animal and pines remain as uncut pumpkin skin. When carving the pine tree segments, cut each zigzag branch notch one at a time using a small detail blade, since the tight repeated angles along the tree edges are easy to over-cut and merge into a single straight line.
Witch with Staff Pumpkin Stencil
A robed witch figure stands holding a tall staff topped with a flame in this expert pumpkin stencil, her pointed hat bearing a spiral curl at the tip and wisps of energy trailing her cloak and pooling at her feet. The design reads as a solid silhouette with strategic interior cuts for the face, flame, and cloak detail, so candlelight halos the entire figure while the fine interior strips glow separately. Keep the narrow bridge connecting the flame to the staff intact until last, as it is the most likely point to snap under blade pressure.
Witch Silhouette Pumpkin Stencil
A full-length witch silhouette fills this jack-o-lantern pumpkin stencil: pointed hat, flowing robes, and a broomstick are all rendered as pierced cut-through shapes, with the surrounding robe fabric left as solid orange pumpkin wall. On the lit pumpkin the broomstick and cloaked figure read as glowing orange forms against a dark background. The witch's hat brim is a narrow horizontal bridge; cut that piece last and work inward from the wider robe sections to keep it from snapping under tool pressure.
Witch on Broomstick Moon Pumpkin Stencil
A classic Halloween silhouette of a witch on a broomstick crossing a full moon fills this pumpkin stencil. The large circle is carved out as a single open pierce, leaving the witch and cat riding the broom as raised orange pumpkin forms within the glowing moon. Wisps of hair or cloak stream behind the figure, and a black cat perches at the broom's tip. Because the witch's streaming hair separates into narrow strips, cut those final wisps with a fine detail blade and work from the broom tip toward the figure to avoid breaking them.
Witch on Broomstick Moon Pumpkin Stencil
A witch on a broomstick flies across a full moon in this expert pumpkin stencil, her pointed hat, flowing robes, and broom bristles silhouetted against a circular background of ragged cloud cutouts. The witch figure is solid orange skin set against the large glowing moon disc, and the cloud tears around the moon's edge are pierced through. Carve the small jagged cloud tears around the moon perimeter first, then carefully outline the witch silhouette, leaving her as an uncut island of skin inside the open moon.
Witch on Moon Pumpkin Stencil
A tall oval moon dominates this hard witch pumpkin stencil, with a thin vertical broomstick cutting through the center and a small witch figure silhouetted at the bottom, surrounded by four-pointed star cutouts. The moon is carved as a large open oval, so the broom handle remains as a solid pumpkin bridge crossing the glow. Stars scattered inside and outside the moon add sparkling pinhole light around the scene. Cut the large moon oval first to establish the dominant glow, but do not sever the broomstick bridge at the center until the very last pass.
Vampire Face Pumpkin Stencil
A close-up vampire face dominates this witch-category pumpkin stencil, featuring wide circular eyes with small pupils, a widow's-peak hairline, swept-back collar wings, and a gaping mouth with prominent fangs. The large open areas of the eyes, collar, and mouth are pierced through, while the face itself stays solid so the features read clearly when lit. Cut the two eye circles first to anchor your registration, then work outward to the collar wings before tackling the mouth and fang gaps.
Witch Silhouette Pumpkin Stencil
A full-length witch figure stands in this expert pumpkin stencil, crowned by a tall pointed hat with a wide brim, her long flowing robes splitting into jagged tapered strips that trail toward the ground, bony fingers extending from her sleeves, and a curling decorative element at the hem. The design is built from many narrow vertical cut-through strips separated by very thin orange bridges, giving the finished carving an almost lace-like quality when lit. Work from the hat point downward, cutting each robe strip individually before widening cuts near the base where the shapes are broader.
Witch Hat Pumpkin Stencil
This witch-hat pumpkin stencil reduces the classic Halloween icon to its boldest shapes: a wide, wavy brim in two swooping cut-out bands, a trapezoidal crown, and a tight spiral curl at the hat's tip. The large open areas mean the design reads clearly even on a small pumpkin, and the lit result is a silhouette-style hat floating against glowing orange. Cut the lower brim band first, then the upper brim, and finally the crown, so the spiral finial stays supported until the end.
Witch Cauldron Pumpkin Stencil
A round-bellied witch's cauldron sits on a small tripod base while a large plume of swirling smoke and flame rises above it, branching into curling tendrils with scattered circular bubble cutouts floating free in this witch pumpkin stencil. The cauldron interior is a large open void, the smoke tendrils are narrow pierced ribbons, and each bubble is a tiny individual circle punched through the skin. Cut the cauldron body first, then remove the larger smoke ribbons; leave the small bubble circles for last and use a round drill bit or small gouge to keep them clean.
Witch with Staff Pumpkin Stencil
A robed witch stands arms wide inside a large circular moon, gripping a tall staff crowned with a starburst, while jagged flame shapes rise from the ground at her feet in this expert-level witch pumpkin stencil. The large moon disc is pierced open, and the witch figure is left as a solid pumpkin-skin silhouette within it, creating a glowing halo effect around her when lit. The staff is the most isolated element, connected to the composition only by a thin wrist bridge, so leave it uncut until every surrounding section is finished.
Witch Cauldron Pumpkin Stencil
A witch's cauldron viewed straight on forms this easy witch pumpkin stencil, with three bubble circles floating above the pot, a wide rectangular opening for the cauldron mouth, a thick rim strip, and two claw-footed legs flanking a centered spout at the base. All the shapes are cut through as separate open pieces, glowing independently when lit to suggest a bubbling brew. Cut the three small bubble circles near the top of the design first, since they sit in isolation and are easiest to control before the larger cuts below loosen the wall.
Trick or Treat Pumpkin Stencil
A bold typographic pumpkin stencil spelling out TRICK OR TREAT in three stacked lines of wide block stencil letters, each character separated by narrow bridges that keep the letterforms readable when carved through. The large open interiors of the letters glow with even, full-face brightness when lit. Cut enclosed letter counters, the circular center of the R and the inside of the O, before removing the surrounding letter bodies, so those islands stay in position while you work.
Witch Silhouette Moon Pumpkin Stencil
A silhouette witch pumpkin stencil showing a tall, elegant witch figure standing inside a large oval moon shape, holding her broomstick upright at her side with its bristle end resting on the ground and a small curled wisp near her feet. The witch silhouette stays solid orange while the surrounding oval moon area is carved away, creating a glowing halo effect that frames the dark figure. Carve the large oval background sections on either side of the witch's body in two passes, leaving the thin bridges at her hat brim and broomstick handle intact to keep the figure anchored.
Frequently asked
- How long do these pumpkin carving patterns take?
- Easy designs take 20–40 minutes. Hard and expert designs can take 2+ hours, but the result is worth it.
- What size pumpkin works best for diy witch pumpkin carving patterns?
- A medium-sized round pumpkin (about 8–10 inches tall) works for most pumpkin carving patterns. Larger pumpkins make detailed cuts easier.
- How do I transfer the pumpkin carving pattern to my pumpkin?
- Print the PDF at 100% scale, tape it to your pumpkin, and poke through the lines with a pin or pencil. Then connect the dots with your knife.