Similar pumpkin stencils
View all stencils →About this stencil
This free Witch Hat pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. This witch-hat pumpkin stencil reduces the classic Halloween icon to its boldest shapes: a wide, wavy brim in two swooping cut-out bands, a trapezoidal crown, and a tight spiral curl at the hat's tip. The large open areas mean the design reads clearly even on a small pumpkin, and the lit result is a silhouette-style hat floating against glowing orange. Cut the lower brim band first, then the upper brim, and finally the crown, so the spiral finial stays supported until the end. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Beginner-friendly. Estimated time: 45-60 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 45-60 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the spiral curl. Start with the curled tip at the upper right. Follow the spiral inward with short passes; the hook at its center is the tightest turn in the design.
- Open the two crown pieces. Cut the rounded top segment of the hat, then the larger segment below it. Keep the white band between them intact; it is what makes the hat read as striped.
- Cut the small lower crown band. Remove the narrow wedge above the brim. Saw toward its pointed right end from both sides rather than turning the blade at the tip.
- Cut the two brim waves last. Open the upper brim band and then the long lower brim band, working each pointed tip from both directions. The thin white strip between the two brim pieces must stay attached, so keep the blade centered in each gray band and support the long plugs as they come free.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyThe Crooked Witch Hat Pumpkin Stencil
A classic witch hat fills the pumpkin face, its tall crown bending over at the tip above a broad, gently curved brim. The whole hat is removed as one pierced piece, making a big bright silhouette with no interior details to fuss over. As an easy single-cut design, just keep your blade angled slightly inward as you saw so the large panel pulls free without wedging.
IntermediateWindswept Witch Pumpkin Stencil
A witch in a pointed hat rides her broom across the pumpkin, cloak trailing and broom bristles brushed out to the left as one bold glowing silhouette. The entire figure is cut through as a single connected opening, so the drama comes from the outline rather than fine interior detail. For this medium carve, start with the big body mass and work outward, cutting the hat point and individual bristle tips last so the surrounding rind supports your blade the whole way.
IntermediateThe Bewitched Hat Pumpkin Stencil
A tall witch hat with a jauntily bent tip glows from the pumpkin, its wide oval brim carved as a separate opening beneath the crown so the solid hatband reads as a dark stripe between them. Around the hat, small circles and diamonds sparkle like scattered magic. This medium design hinges on that hatband bridge; cut the crown and brim as two independent openings and never saw across the band, then finish with the little sparkle shapes using a drill and detail knife.
Beginner-friendlyCrooked Cap Witch Hat Pumpkin Stencil
Print the Crooked Cap Witch Hat pumpkin stencil with a numbered cutting pattern and step-by-step guide. Easy design; print at actual size.
Beginner-friendlyBubbling Brew Pumpkin Stencil
A round-bellied witch's cauldron with side handles and little legs, carved as one big glowing cutout, while three round bubble holes rise above the rim like escaping brew. Everything cuts fully through, so the pot blazes and the bubbles float as bright dots. One of the easiest spooky designs going; punch the three bubbles first, then saw the cauldron body in sections, leaving the handle nubs attached to the main opening.
Beginner-friendlyWitch Hat Jack-o-Lantern Pumpkin Stencil
A grinning jack-o-lantern face wearing a small pointed witch hat sits at the center of this easy funny pumpkin stencil. The face features two large crescent-shaped eyes with small round highlight dots inside each, a triangular nose, a wide upward-curving mouth with a center tooth drip, and wispy curl accents at the cheek corners. The hat brim and crown are solid while the eye crescents, nose, and mouth are cut through. Carve the two small round eye-highlight dots before removing the larger crescent eye shapes so those tiny circles stay intact and the eye reads with dimension when lit.