Similar to This
View all stencils →About this stencil
A round-bellied witch's cauldron sits on a small tripod base while a large plume of swirling smoke and flame rises above it, branching into curling tendrils with scattered circular bubble cutouts floating free in this witch pumpkin stencil. The cauldron interior is a large open void, the smoke tendrils are narrow pierced ribbons, and each bubble is a tiny individual circle punched through the skin. Cut the cauldron body first, then remove the larger smoke ribbons; leave the small bubble circles for last and use a round drill bit or small gouge to keep them clean. This design is rated Expert / Pro and takes most carvers around 240 minutes from trace to glow. Sculpting-grade work. Three or more depth layers, fine detail.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery tea lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Transfer the stencil; mark each small bubble circle with a center dot so none are missed.
- Cut the large cauldron interior as a single oval, removing the piece cleanly.
- Carve the tripod base legs, using short controlled cuts at each foot.
- Work up through the smoke column: cut the widest central ribbon first, then the branching side tendrils from bottom to top.
- Finish with the bubble circles; a round leather punch or small drill bit makes cleaner holes than a knife for these tiny shapes.
- Place the light source low inside so smoke tendrils glow from below, making the bubbles appear to float upward.
Tools you'll need
For a expert / pro carve like this you'll want a full ribbon tool set, clay sculpting loops, x-acto knife, and dremel (optional). Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Homemory LED Tea Lights
24-pack of battery-operated lights
Battery-operated, flickering lights for a candle-like glow inside your finished pumpkin.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
- Advanced
Howling Wolf Moon Pumpkin Stencil
A wolf howling at a large crescent-shaped moon fills this hard pumpkin stencil, with a trio of jagged pine trees to the left and the wolf's body set as a solid orange silhouette inside the open pierced moon arc. The moon itself is the glowing background that frames the wolf and trees, while the animal and pines remain as uncut pumpkin skin. When carving the pine tree segments, cut each zigzag branch notch one at a time using a small detail blade, since the tight repeated angles along the tree edges are easy to over-cut and merge into a single straight line.
- Expert / Pro
Witch with Staff Pumpkin Stencil
A robed witch figure stands holding a tall staff topped with a flame in this expert pumpkin stencil, her pointed hat bearing a spiral curl at the tip and wisps of energy trailing her cloak and pooling at her feet. The design reads as a solid silhouette with strategic interior cuts for the face, flame, and cloak detail, so candlelight halos the entire figure while the fine interior strips glow separately. Keep the narrow bridge connecting the flame to the staff intact until last, as it is the most likely point to snap under blade pressure.
- Advanced
Witch Silhouette Pumpkin Stencil
A full-length witch silhouette fills this jack-o-lantern pumpkin stencil: pointed hat, flowing robes, and a broomstick are all rendered as pierced cut-through shapes, with the surrounding robe fabric left as solid orange pumpkin wall. On the lit pumpkin the broomstick and cloaked figure read as glowing orange forms against a dark background. The witch's hat brim is a narrow horizontal bridge; cut that piece last and work inward from the wider robe sections to keep it from snapping under tool pressure.
- Advanced
Witch on Broomstick Moon Pumpkin Stencil
A classic Halloween silhouette of a witch on a broomstick crossing a full moon fills this pumpkin stencil. The large circle is carved out as a single open pierce, leaving the witch and cat riding the broom as raised orange pumpkin forms within the glowing moon. Wisps of hair or cloak stream behind the figure, and a black cat perches at the broom's tip. Because the witch's streaming hair separates into narrow strips, cut those final wisps with a fine detail blade and work from the broom tip toward the figure to avoid breaking them.
- Expert / Pro
Witch on Broomstick Moon Pumpkin Stencil
A witch on a broomstick flies across a full moon in this expert pumpkin stencil, her pointed hat, flowing robes, and broom bristles silhouetted against a circular background of ragged cloud cutouts. The witch figure is solid orange skin set against the large glowing moon disc, and the cloud tears around the moon's edge are pierced through. Carve the small jagged cloud tears around the moon perimeter first, then carefully outline the witch silhouette, leaving her as an uncut island of skin inside the open moon.
- Advanced
Witch on Moon Pumpkin Stencil
A tall oval moon dominates this hard witch pumpkin stencil, with a thin vertical broomstick cutting through the center and a small witch figure silhouetted at the bottom, surrounded by four-pointed star cutouts. The moon is carved as a large open oval, so the broom handle remains as a solid pumpkin bridge crossing the glow. Stars scattered inside and outside the moon add sparkling pinhole light around the scene. Cut the large moon oval first to establish the dominant glow, but do not sever the broomstick bridge at the center until the very last pass.