Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
91 results · Page 1 of 3
Alien Pumpkin Stencil
An extraterrestrial figure with an oversized oval head, large almond-shaped eyes, delicate facial features, and a lean torso covered in fine ribbed line-work fills this expert-level pumpkin stencil. The alien holds up one three-fingered hand in a peace sign, and the entire upper head is decorated with small curved slash marks suggesting brain-like texture. Each fine interior line across the torso and head must be cut precisely to retain the many thin bridges that keep the design from collapsing. Cut the small curved head-texture marks first before any large area is removed, as they rely on a full wall for support.
Animal Skeleton Pumpkin Stencil
An expert-level animal skeleton pumpkin stencil showing a four-legged creature in profile, likely a large cat or prehistoric predator, with every bone individually rendered: elongated ribcage with many parallel curved ribs, shoulder and hip joints, individual leg bones, and a detailed skull with open jaws. The composition fills the entire pumpkin face diagonally with dozens of separate cut-through bone shapes. Because the ribs are thin parallel strips, cut them from the spine outward rather than across, and leave the connecting spine strip uncut to hold them all in line.
Bandaged Mummy Pumpkin Stencil
A stout, squat mummy character dominates this expert pumpkin stencil, its entire body layered in spiraling bandage wraps that read as a dense web of curved negative-space cuts. Two round eyes peek out as small circles near the top, and wild tattered bandage ends fly from both arms and along the ground line. The arms, made up of irregular claw-like bandage shreds, are the most fragile sections; cut them after the body core is fully carved so the pumpkin stays stable throughout.
Bearded Man Portrait Pumpkin Stencil
A bearded man shown from chest up is rendered in this expert pumpkin stencil with fine portrait linework: tousled spiked hair, narrow cut-out lines for expressive eyes with visible irises, a trimmed goatee built from small isolated patches, an open jacket collar, and a table or surface line at the bottom. The face relies on dozens of thin pumpkin bridges to hold the portrait together, creating a detailed likeness when lit. Carve the small goatee patches and eye details first, before the larger jacket and background cuts are made, to keep the face area stable throughout.
Black Cat Pumpkin Stencil
A crouching cat rendered in fluid streaks of fur fills this expert pumpkin stencil: the compact face with pointed ears and dot whiskers anchors the left, while the body dissolves into dozens of flowing slash-shaped cuts representing individual fur strands, a high arched tail, and extended claws. The striped fur pattern creates many thin orange bridges between the cuts, giving the carved pumpkin a dramatically textured look when lit. Cut the face details first while the surrounding wall is intact, then work the fur slashes from the body outward toward the tail tip.
Bride of Frankenstein Pumpkin Stencil
A portrait-style bust of the Bride of Frankenstein dominates this expert-level Frankenstein pumpkin stencil, her wild electrified hair radiating outward in dozens of jagged flame-like spikes. Solid gray masses define the face and shoulders, while the surrounding tendrils are carved as individual pierced channels that let candlelight filter through in a scattered, dramatic halo. Many of the hair tips are freestanding islands connected by thin pumpkin bridges. Carve the facial features and solid facial mass last, after clearing all the surrounding hair spikes, to avoid distorting the face while your hands are still working near it.
Corgi Pumpkin Stencil
A fluffy corgi puppy sits front-facing on this dog pumpkin stencil, its large upright ears, round eyes with pupils, small round nose, and thick fur ruff all rendered in fine irregular cut lines that break the coat into tufts of light and shadow. The design has many small to medium cut sections across the face and body connected by thin fur-texture bridges. When lit, the corgi face glows warmly with every fur gap illuminated. Cut the small facial features first: the pupil circles inside the eyes, the nose, and the mouth line, before tackling the broader chest and body sections.
Dancing Skeleton Dia de Muertos Pumpkin Stencil
A skeletal Dia de los Muertos figure wearing a flower-crowned hat dances atop a row of pointed picket-fence stakes in this expert sugar-skull pumpkin stencil, with crossbones at its sides, a lacy ruffled collar, and small flower rosettes scattered at the fence tops. Dozens of small isolated cut pieces, including the fence picket slots, collar ruffles, and flower details, create a composition that must be carved in strict order to avoid structural collapse. Start with the fence picket slots at the bottom of the design and work upward, finishing the skeleton body details last.
Demon Face Pumpkin Stencil
A demon face stares out from this expert pumpkin stencil, its two curved ram-like horns sweeping upward and outward, wild hair radiating from the sides, a bearded chin, and glaring deeply set eyes framed by heavy brow lines. Wing-like shoulder shapes flare wide at either side. The dense interlocking cuts form dozens of small glowing slivers around the retained face features, which remain as solid orange skin. Carve the narrow hair fringe pieces on each side first to release the outer sections, then work inward toward the eyes and beard.
Demon Tree Pumpkin Stencil
A demonic tree creature roars from this expert pumpkin stencil: a gnarled trunk rises from spreading roots, branching into twisted limbs with curling twig tendrils, while a menacing face with jagged saw-tooth teeth and hollow eye cavities glares from the center. Dozens of thin, curving cut sections radiate outward, separated by very narrow orange bridges. Work from the outermost twig tips inward toward the central face to avoid snapping the thin outer branches while the interior is still supported.
Devil in Flames Pumpkin Stencil
A muscular devil figure with curved horns and a snarling face is wreathed in jagged flame tongues that radiate outward from his body. The stencil uses large pierced areas for the flames and the open silhouette around his torso, while thin solid bridges define the horns, facial features, and the clawed hands. When lit, the jack-o-lantern blazes with a crescent of fire around a dark demonic form. Cut the outer flame spikes first so the central figure stays anchored while you work.
Devil in Flames Pumpkin Stencil
A snarling devil or demon figure dissolves into horizontal flame streaks in this expert pumpkin stencil, the upper body and bared-teeth face rendered in dense interlocking cuts while dozens of thin parallel flame lines trail outward to the right, tapering to points. Lit from inside, the flames read as a cascading burst of light across the pumpkin surface. Cut the face details first, then work along the flame lines from the body toward the outermost tips, always cutting from the thick base of each flame toward its thin pointed end.
Devil with Trident Pumpkin Stencil
A stocky cartoon devil crouches in a lunging pose, holding a trident horizontally across his body while lightning bolts crackle at his feet. Horns, pointed ears, and a wide-toothed grin are all rendered in open cutouts, and the overall figure is surrounded by enough white space to read crisply as a lit jack-o-lantern. The three prongs of the trident sit very close together, so cut the two narrow gaps between them with a thin detail blade before removing the larger body sections to keep the surrounding pumpkin from flexing.
Dragon Eye Pumpkin Stencil
An enormous reptilian eye dominates this pumpkin stencil, rendered as a slit-pupil iris surrounded by jagged scale-like fragments and frayed, tooth-edged eyelid margins. The large pupil and the scales radiating outward are all pierced sections, leaving thin orange bridges between them that suggest skin and scale texture when lit. Because many of the scale pieces are isolated islands surrounded by cut areas on all sides, pin each one with a toothpick before making final cuts to prevent pieces from dropping inward and tearing the bridges.
Dragon Pumpkin Stencil
A sinuous East Asian-style dragon coils from head to tail down the full height of this expert pumpkin stencil, with a horned head snarling at center, clawed feet gripping outward, a spine of dorsal spikes, and a long body that spirals in a tight S-curve to the bottom. Dense internal detail lines define scales and flame whiskers as narrow skin bridges throughout the figure. Carve the small head detail islands and claw tips first, then work down the body in sections, preserving the thin spine ridges that connect each body coil.
Eastern Dragon Pumpkin Stencil
A highly detailed Eastern-style dragon in a crouching, four-legged stance fills this expert pumpkin stencil, with a horned and whiskered head, rows of dorsal spines, a scaled underbelly rendered as oval cutouts along the torso, clawed feet, and a coiling tail with a spiral tip. An intricate network of thin bridges holds the isolated scale ovals and spine shapes in place. Work from the outermost tail spiral inward, and cut the tiny dorsal spine gaps only after all larger surrounding areas are removed, so the skin doesn't flex and crack prematurely.
Einstein Portrait Pumpkin Stencil
An Albert Einstein portrait pumpkin stencil rendered in bold linework: wild tufts of windswept hair radiate from both sides, deeply set eyes under heavy brow lines, a rounded nose, and an open mouth with the tongue sticking out. The linework approach leaves the face mostly solid orange with thin cut lines defining the wrinkles, hair tufts, and collar diagonals below, so the finished pumpkin reads as a recognizable portrait even in dim light. Cut the hair tufts from the tips inward toward the head to reduce leverage on those fragile points.
Flame Werewolf Pumpkin Stencil
A werewolf head in profile faces right, built entirely from flame-shaped strokes and pointed fur tufts that radiate outward from a snarling snout and bared teeth, creating a tribal-tattoo effect across the whole pumpkin face. The design has no large open areas; instead dozens of narrow flame cuts pierce through, leaving thin pumpkin bridges between each cut that glow orange and separate clearly from the negative space. Cut the smallest innermost flame tips around the snout first, then spiral outward to the largest wing-like strokes at the edges.
Fluffy Kitten Pumpkin Stencil
A wide-eyed, fluffy kitten sits upright with its front paws tucked forward in this expert-level pumpkin stencil. The fur is rendered as dozens of short jagged cut-outs that texture the entire head and body, with two large round eyes and a small tongue-out mouth pierced through in the face. Lit from within, the cat's face glows clearly while the fur detail creates a speckled halo of light around it. Cut all the inner facial features before the outer fur ring, since the edge fringe is fragile and removing those last keeps the face from shifting while you work.
Flying Saucer Pumpkin Stencil
A flying saucer pumpkin stencil with a domed upper hull made of stacked horizontal band segments separated by narrow orange ribs, creating a layered effect that suggests a ringed spacecraft in profile. The bands alternate between cut and solid, so when lit the saucer appears to glow with horizontal light stripes rather than as a flat shape. Cut the widest central band first to anchor your position, then work upward band by band toward the dome, keeping each thin rib intact so the layers do not collapse mid-carve.
Formula Race Car Pumpkin Stencil
A detailed open-wheel formula racing car stretches across the full width of this pumpkin stencil in a low side profile, showing the nose cone, cockpit canopy, front and rear wings, and large exposed tires. The design keeps the car body as solid orange pumpkin wall with the negative space cut away around it, so the lit jack-o-lantern presents the car as an orange silhouette in a dark field. The nose cone and rear wing tips extend to very narrow points, so cut those extremities last once the large background sections have been removed and the remaining wall is light and flexible.
Full Skeleton Pumpkin Stencil
A full standing human skeleton fills this pumpkin stencil from skull to toe bones, its ribcage, pelvis, limb segments, and finger and toe joints all rendered as distinct cut-out sections separated by thin solid bridges. When lit, every bone grouping glows individually against the orange pumpkin wall. Cut the ribcage slots from the center outward to avoid destabilizing the spine bridge that holds the upper torso together.
Gargoyle Pumpkin Stencil
A detailed gargoyle face stares out from this expert pumpkin stencil, with swept-back horns, pointed ears, arching eyebrows, a broad flat nose, and wide wings that flare to either side like a cathedral guardian. Dozens of separate cut-out pieces form the facial features and wing feathers, leaving solid bridges of pumpkin skin to hold each island in place. Work from the smallest interior details outward: cut the eyebrow slashes, nostril notch, and tiny chin dimple first, then the larger wing panels last, to keep the fragile facial bridges stable while you carve.
God Bless America Pumpkin Stencil
Bold block lettering spelling "GOD BLESS" arches above a full American flag, with the canton's grid of 50 open stars and seven horizontal stripes cut through below, and "AMERICA" in wide stencil letters across the bottom of this pumpkin stencil. The stars are the most demanding element: each is pierced individually while thin pumpkin skin forms the canton background. Cut the stripe sections and base text first, then work through the star field from the center outward to keep the canton wall stable.
Graveyard Scene Pumpkin Stencil
A wide panoramic graveyard scene fills this pumpkin stencil from edge to edge: a gnarled bare tree dominates the right side with spidery branches, a crescent moon peeks above the tree line, two bats fly near the top left, a row of varied tombstones stretches across the middle ground, and a foreground of jagged dead grass and roots fills the bottom. All elements remain connected as a single cut sheet of pumpkin wall with the background space pierced away, so the entire scene glows in silhouette. Carve the bat shapes and moon sliver at the top first while the tall tree branches above them still anchor the upper wall.
Graveyard Scene Pumpkin Stencil
A bare, gnarled tree with reaching branches, a perched owl, two flying bats, and a cluster of cemetery cross tombstones fill a large crescent-moon frame in this expert graveyard pumpkin stencil. Nearly every element is a carved pierce-through, leaving thin orange bridges for the tree branches and tombstone edges. The lit pumpkin produces a richly detailed haunted graveyard scene. Start with the smallest elements inside the scene, such as the owl silhouette and the cross details on each tombstone, before the large moon arc is removed and the frame loses rigidity.
Great Horned Owl Face Pumpkin Stencil
A fierce great-horned owl face looms forward in this expert pumpkin stencil, with two large almond-shaped eye cavities framed by heavy curved brow ridges, a sharp pointed beak at center, ear tufts sweeping upward and outward, and dense spiky feather tips radiating outward from the face. The background within each eye cavity and around the brow is cut away in multiple sections, while the beak, brow ridges, and outer feather spikes stay solid as orange bridges. Begin with the eye cavities early to anchor symmetry, then cut the spiky outer feather tips last since they are the most likely to snap.
Grim Reaper Pumpkin Stencil
A shrouded Grim Reaper grips a scythe overhead in this expert-level pumpkin stencil, packed with dozens of jagged, flowing cut sections that render tattered robes, bony fingers, a skull face peering from the hood, and a second smaller skull on the chest. The design reads as a dense web of orange skin bridges surrounding numerous glowing cutouts. Tackle the smallest interior cuts around the skull face first so you have full stencil support, then work outward through the robe details toward the large robes and scythe blade.
Grim Reaper Pumpkin Stencil
A hooded Grim Reaper face looms from within a tattered, wind-swept cloak in this expert pumpkin stencil, its skull face showing deep-set eye sockets, a skeletal nose cavity, and rows of exposed teeth, all surrounded by jagged cloak edges that dissolve into flame-like wisps at the bottom. Dozens of small cuts through the cloak fabric, face, and shroud edges create a complex web of glowing gaps. Tackle the most crowded area, the teeth row, first when your hands and the pumpkin are both fresh, then spiral outward to the cloak wisps.
Grim Reaper with Scythe Pumpkin Stencil
A hooded Grim Reaper leans forward gripping a large curved scythe, its skeletal face visible inside the cowl, and tattered robe edges dissolving into ragged fringe at the bottom in this expert grim reaper pumpkin stencil. The composition reads as a single dramatic figure, with the scythe blade sweeping up behind the figure and the robe tatters creating many thin separate cuts below. Carve the robe fringe tatters at the base first, since those narrow flame-like cuts are the easiest to crack once adjacent large sections of the torso are removed.
Halloween Graveyard Scene Pumpkin Stencil
A fully populated Halloween graveyard scene spans this expert pumpkin stencil: a bare dead tree at center with a jack-o-lantern hanging from one branch, two grinning jack-o-lanterns on the ground, a skeletal hand rising from the earth, a cross headstone, a wrought-iron fence section, a smaller rounded grave marker, a winged ghost in the upper left, and two bats in flight at the top right. All elements are connected along a common ground line with dozens of individual floating pieces throughout. Work from the upper corners inward, cutting bats and ghost first, then the tree, so the center ground elements are cut last while the skin is most rigid.
Happy Halloween Drip Text Pumpkin Stencil
The words HAPPY HALLOWEEN wrap across this pumpkin stencil in a wide dripping horror typeface, the tall letters of HALLOWEEN spanning the full width of the pumpkin in a single solid banner with icicle-like drips hanging from each base. The smaller word HAPPY sits above in a lighter display face. All letters are carved as open cut-outs connected edge to edge, forming a wide horizontal band of glowing text. Thin the pumpkin wall to about half an inch across the whole text zone before carving, because the long horizontal band removes a large section of structural support and a thinner wall is easier to keep from cracking under the blade.
Haunted Oak Tree Pumpkin Stencil
A bare haunted oak rises inside an oval frame in this expert-level tree pumpkin stencil, its trunk split at the base into gnarled roots, its branches spiraling upward with curling scrolled tips, and a sinister face lurking at the trunk where two narrow eye-slits and a spiky mouth hide among the roots. The large background sections within the oval are cut away so the curling branch and root shapes glow as solid orange silhouettes against a dark interior. Work from the outermost curled branch tips inward toward the trunk so the delicate spirals stay supported while you remove the surrounding background.
Haunted Tree Pumpkin Stencil
A gnarled, bare-branched haunted tree with an angry face hidden in its trunk dominates this expert-level pumpkin stencil, its dozens of thin branch tips and the snarling mouth and eye details forming an intricate web of cuts. When lit, the branching silhouette glows against the pumpkin's skin with dozens of narrow passages of light. Work from the outermost branch tips inward toward the trunk face so the stencil sheet holds its shape while you cut the trickiest inner details last.
Horned Demon Skull Pumpkin Stencil
A demonic horned skull with massive curved ram-like horns and a symmetrical face composed of dozens of interlocking cut fragments makes this one of the most intricate skull pumpkin stencils available. The forehead, cheeks, and jaw are all broken into shaped segments separated by thin pumpkin bridges, and the horns are densely cross-hatched with ridged cuts. Work from the center outward, cutting the tiniest interior fragments first before opening any large jaw or eye-socket voids, to avoid collapsing the many delicate bridges that hold the design together.
Horned Devil Face Pumpkin Stencil
A snarling horned devil face bursts outward in this expert pumpkin stencil, its deeply detailed visage surrounded by wild flame-like hair, pointed ears, and curling scroll accents, while the eyes, nostrils, and sneering mouth with individual teeth are all cut through as fine interior negative spaces. Dozens of flame-fringe cuts radiate from the outer edge, creating a dense, fiery halo effect when lit. Work from the center face features outward toward the flame fringe, so the most delicate outer tips are cut last when you have the steadiest control.