Heart Pumpkin Carving Patterns
Looking for heart pumpkin carving patterns? You're in the right place. Print at 100% scale, tape it to your pumpkin, and poke through the lines with a pin.
Beginner or pro, there's something on this page for you.
Winged Heart Pumpkin Stencil
A large heart with feathered wings spread wide anchors this hard pumpkin stencil, with a scrolling banner ribbon below carrying decorative curl accents. The heart is kept solid as pumpkin flesh while the wing feather gaps and banner interior are cut through, creating a tattoo-style composition that glows with intricate layered detail. The individual feather separations along each wing are narrow and numerous; carve them starting at the outermost wingtip and working toward the heart so the wing stays attached to the body of the pumpkin longest.
Bat Heart Pumpkin Stencil
A large heart with two bat wings spread wide forms this simple pumpkin stencil: the entire shape is a single solid silhouette to be cut away as one connected piece, leaving a bold heart-with-wings opening in the pumpkin face. The pointed wing tips extend on each side and have small secondary notches along the trailing edges. Because the whole design is one cut, work around the heart curves first, then trace out each wing tip slowly so the narrow notches do not tear before the main body of the shape drops free.
Teddy Bear Pumpkin Stencil
A seated teddy bear with tattered, drip-edged fur fills this hard-level pumpkin stencil: a round head with small round ears, two circular cheek spots, a nose-and-muzzle cutout, and a tummy split into two glowing panels flanked by small round paws. The ragged fur silhouette along the top of the head and across the body creates dozens of short, jagged points that must stay connected. Work from the center facial features outward, and avoid pressing too hard on the bear's narrow fur-tip points so they do not snap before the larger belly sections are removed.
Broken Heart Pumpkin Stencil
A large broken heart split down the center by a jagged lightning-bolt crack is the entire design of this pumpkin stencil, with both halves pierced through so candlelight glows from the whole shape. The bold, smooth outlines on either side of the fracture read cleanly from across a porch. Carve the two outer heart sections first, then make the narrow zigzag cut last to keep the thin points of the crack from flexing and tearing while your saw is working nearby.
Cruise Ship Pumpkin Stencil
A large cruise ship viewed from a slight bow-angle fills this hard pumpkin stencil. Four tall rectangular smokestacks rise from the upper deck, the bridge superstructure runs along the top, and five circular portholes line the hull below the waterline. The design reads as a series of rectangular and circular cutouts separated by solid pumpkin strips. When lit, the port holes and superstructure windows glow individually like a ship at sea. Carve the five round portholes first since circular cuts benefit most from a fresh blade, then work upward through the rectangular deck openings.
Love Wins Pumpkin Stencil
A large bold heart dominates the design, split horizontally at its midpoint by a band of stencil text that reads "LOVE WINS" in thick block letters. The upper and lower halves of the heart are both pierced through, and the text band bridges the gap so the heart reads as one unified glowing shape when lit. Because the heart's two halves are each large open voids, carve them before the text strip; clearing the big areas first lets you see exactly how much wall support remains around the letter bridges.
Cartoon Monster Pumpkin Stencil
A stocky cartoon monster stands arms-up with a wide open mouth full of jagged teeth, crescent-shaped eyes beneath rectangular brow bars, and a shaggy body outline. The design uses a dense scatter of mid-size cutouts rather than one large opening, so the lit pumpkin shows the monster as a bright orange silhouette surrounded by black negative space. Carve the rectangular brow pieces and the two tiny crescent pupils first, since they are the smallest islands and easiest to pop out while the wall is still fully supported.
LOVE Pumpkin Stencil
Four tall serif capitals spell out "LOVE" in a single row, each letter sized to span the full height of the pumpkin face, with the word cut completely through so it glows solid when lit. The letterforms use clean, wide strokes with minimal internal bridges, making this one of the most legible word-carving pumpkin stencils in the set. Because the "O" and the interior counter of the "V" require small floating pumpkin islands, remove those internal pieces before fully clearing the surrounding letter to avoid them dropping out unexpectedly.
Heart Eyes Jack-o-Lantern Pumpkin Stencil
A classic jack-o-lantern face gets a romantic twist: two heart-shaped cutouts replace the usual triangle eyes, each framed by three curling eyelash strokes, above a wide crescent grin with three rectangular tooth gaps. The design is beginner-level with large, easy-to-cut openings and gentle curves throughout. Cut each heart eye from the inner point downward and around the lobes rather than starting at the curved top, which helps you keep the heart shape symmetrical on the pumpkin's curved surface.
Jack-o-Lantern Face Pumpkin Stencil
This cheerful pumpkin stencil depicts a pumpkin-within-a-pumpkin: a wide jack-o-lantern face with a curling stem at top, four vertical rib lines crossing the body, and a grinning mouth with curling lip ends and individual tooth segments, all cut as negative space on the outer pumpkin. The vertical rib lines are the thinnest elements, each only a slim channel of open space; carve them with a single guided stroke from stem to mouth to avoid a wavy line. A warm candle light inside makes the rib lines read as glowing stripes across the face.
Cute Cartoon Monster Pumpkin Stencil
A round, cartoonish little monster stands front-facing with two large curved horns at the top, wide oval eyes, small fangs, fuzzy legs, and stubby arms raised at its sides. Most of the body outline is pierced through, leaving the solid oval pupils and the narrow bridges between the arms and torso intact. Carve the large horn arcs first while the pumpkin wall has maximum strength, then work inward to the eyes and finally the jagged fur fringe around the legs.
One-Eyed Monster Pumpkin Stencil
This one-eyed monster character has a round head ringed with wild hair, a single large circular eye socket, a wide grinning mouth, and a short stubby body with splayed hands and feet. The stencil mixes solid areas (the pupil island inside the eye, the hair fringe, the torso patches) with pierced cutouts for the eye socket, mouth, and body gaps. Lit from inside, the monster's oversized eye glows brightly while the hair and body details form a dark, shaggy border. Keep the small circular island inside the eye intact, losing it turns the design from a recognizable eye into a plain hole.
Hibiscus Flower Pumpkin Stencil
A large hibiscus flower with five broad rounded petals and a starburst of slender stamens radiating from the center fills this pumpkin stencil, plus a small cluster of four round pollen dots floating in the upper right corner. The five petal sections and the space around the stamens are all pierced-through, leaving the thin stamen lines as solid bridges that cross the open flower interior. Cut the four small pollen dots first, then work petal by petal from the outside in, saving the narrow stamen bridges for last so they remain stable throughout the carving process.
Anatomical Heart Pumpkin Stencil
An anatomical human heart rendered in stylized line art fills this pumpkin stencil, showing the four-chambered organ with aorta and pulmonary artery branching upward and a branching network of vessels spreading across the lower half. The design is built of thick curved channels that are cut through, leaving a web of solid pumpkin bridges between them that hold the composition together. Carve the thinnest branching vessel channels at the base first so you can still brace the pumpkin firmly against those areas before the larger upper artery cuts remove structural mass from the top of the design.
Furry Monster Pumpkin Stencil
A stocky, fuzzy monster with two curved C-shaped eyes, a wide toothed grin, shaggy fur texture all over its body, two stubby horns, and three-fingered clawed hands raised at its sides fills this hard pumpkin stencil. The fur shag is expressed as jagged fringe cuts around the silhouette's edge rather than interior cuts, keeping the figure stable. The thick C-eye shapes and the tooth row between the upper and lower jaw are the most structurally important bridges. Carve the fur fringe around the outer edge before opening the smile area so the lower body stays anchored.
Googly-Eyed Ghost Pumpkin Stencil
A cartoonish goggle-eyed creature with a wide open mouth and trailing ghost-like body fills this pumpkin stencil: two circular eyes each orbit a crescent-shaped eyelid, and a broad flowing torso dissolves into wispy tendrils at the base. The large open area of the body is pierced through entirely, while the eye elements and a small beak-like mouth cutout remain as floating islands bridged by thin pumpkin walls. Cut the smallest interior eye details before the large body opening so the bridges stay supported and the delicate crescent lids don't snap under tool pressure.
Baby Footprints Pumpkin Stencil
Two tiny baby footprints, complete with individual toe circles, sit inside a gracefully flowing open-line heart on this pumpkin stencil for expecting parents. The footprint soles and toes are all cut away while the elegant swirling heart perimeter stays as a solid pumpkin-skin border. Carve all ten toe circles before cutting the foot soles, since the toe holes are easiest to punch cleanly when the surrounding wall is still undisturbed.
Pride Heart Pumpkin Stencil
A bold heart outline with the word "PRIDE" in wide block letters across its center makes up this easy pumpkin stencil. The heart shape is split horizontally by the text band: the upper heart arch stays solid at the top, the letter counters (the enclosed spaces inside letters like R, D, and I) stay as solid islands, and the large lower heart triangle along with the negative spaces around each letter are pierced through. When lit, the glowing letters read sharply against the dark heart background. Cut the letter interiors first, preserving each letter's counter islands, before removing the large heart body below.
Wild Monster Pumpkin Stencil
A wild-haired cartoon monster character grins with an enormous open mouth in this pumpkin stencil, its jagged mane and raised arms forming the outer silhouette, while the gaping mouth interior and a large swirling single eye are the primary cut-through elements. Small outstretched finger gaps and a body hollow add secondary glow points. Cut the wide gaping mouth cavity first since it is the largest opening and removing it early prevents the pumpkin wall from bowing when you make the tighter surrounding cuts.
Baby Footprints Heart Pumpkin Stencil
Two cartoon baby footprints sit side by side inside a swirling open-line heart outline on this easy hearts pumpkin stencil. The footprints are pierced through entirely, while the thin looping heart border and the zigzag crack detail beneath are left as solid bridges of pumpkin skin. The ten small toe circles are the trickiest cuts: carve them with a small round detail bit or the tip of a narrow blade, and do them before removing the larger foot cutouts so the surrounding wall stays rigid.
Cartoon Crab Pumpkin Stencil
A cartoon crab pumpkin stencil with two large curved pincer claws spread wide on each side, two flame-shaped claws raised overhead, a round body edged with jagged serrations, a circular belly, and small stubby legs at the bottom. The solid crab body and claw shapes remain as orange pumpkin skin while the surrounding background and the gaps between the pincers are cut away, creating a silhouette that glows from the outer edges. Keep the narrow connectors between each claw and the body intact until the final cut so the arms stay anchored.
Frequently asked
- What size pumpkin works best for heart pumpkin carving patterns?
- A medium-sized round pumpkin (about 8–10 inches tall) works for most pumpkin carving patterns. Larger pumpkins make detailed cuts easier.
- How do I transfer the pumpkin carving pattern to my pumpkin?
- Print the PDF at 100% scale, tape it to your pumpkin, and poke through the lines with a pin or pencil. Then connect the dots with your knife.
- How long do these pumpkin carving patterns take?
- Easy designs take 20–40 minutes. Hard and expert designs can take 2+ hours, but the result is worth it.