Similar to This
View all stencils →About this stencil
A large broken heart split down the center by a jagged lightning-bolt crack is the entire design of this pumpkin stencil, with both halves pierced through so candlelight glows from the whole shape. The bold, smooth outlines on either side of the fracture read cleanly from across a porch. Carve the two outer heart sections first, then make the narrow zigzag cut last to keep the thin points of the crack from flexing and tearing while your saw is working nearby. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery tea lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery tea light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and tea light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Homemory LED Tea Lights
24-pack of battery-operated lights
Battery-operated, flickering lights for a candle-like glow inside your finished pumpkin.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
- Advanced
Winged Heart Pumpkin Stencil
A large heart with feathered wings spread wide anchors this hard pumpkin stencil, with a scrolling banner ribbon below carrying decorative curl accents. The heart is kept solid as pumpkin flesh while the wing feather gaps and banner interior are cut through, creating a tattoo-style composition that glows with intricate layered detail. The individual feather separations along each wing are narrow and numerous; carve them starting at the outermost wingtip and working toward the heart so the wing stays attached to the body of the pumpkin longest.
- Beginner-friendly
Bat Heart Pumpkin Stencil
A large heart with two bat wings spread wide forms this simple pumpkin stencil: the entire shape is a single solid silhouette to be cut away as one connected piece, leaving a bold heart-with-wings opening in the pumpkin face. The pointed wing tips extend on each side and have small secondary notches along the trailing edges. Because the whole design is one cut, work around the heart curves first, then trace out each wing tip slowly so the narrow notches do not tear before the main body of the shape drops free.
- Advanced
Teddy Bear Pumpkin Stencil
A seated teddy bear with tattered, drip-edged fur fills this hard-level pumpkin stencil: a round head with small round ears, two circular cheek spots, a nose-and-muzzle cutout, and a tummy split into two glowing panels flanked by small round paws. The ragged fur silhouette along the top of the head and across the body creates dozens of short, jagged points that must stay connected. Work from the center facial features outward, and avoid pressing too hard on the bear's narrow fur-tip points so they do not snap before the larger belly sections are removed.
- Advanced
Cruise Ship Pumpkin Stencil
A large cruise ship viewed from a slight bow-angle fills this hard pumpkin stencil. Four tall rectangular smokestacks rise from the upper deck, the bridge superstructure runs along the top, and five circular portholes line the hull below the waterline. The design reads as a series of rectangular and circular cutouts separated by solid pumpkin strips. When lit, the port holes and superstructure windows glow individually like a ship at sea. Carve the five round portholes first since circular cuts benefit most from a fresh blade, then work upward through the rectangular deck openings.
- Advanced
Love Wins Pumpkin Stencil
A large bold heart dominates the design, split horizontally at its midpoint by a band of stencil text that reads "LOVE WINS" in thick block letters. The upper and lower halves of the heart are both pierced through, and the text band bridges the gap so the heart reads as one unified glowing shape when lit. Because the heart's two halves are each large open voids, carve them before the text strip; clearing the big areas first lets you see exactly how much wall support remains around the letter bridges.
- Advanced
Cartoon Monster Pumpkin Stencil
A stocky cartoon monster stands arms-up with a wide open mouth full of jagged teeth, crescent-shaped eyes beneath rectangular brow bars, and a shaggy body outline. The design uses a dense scatter of mid-size cutouts rather than one large opening, so the lit pumpkin shows the monster as a bright orange silhouette surrounded by black negative space. Carve the rectangular brow pieces and the two tiny crescent pupils first, since they are the smallest islands and easiest to pop out while the wall is still fully supported.