Similar pumpkin stencils
View all stencils →About this stencil
This free Giggly Gremlin pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A round, cartoonish little monster stands front-facing with two large curved horns at the top, wide oval eyes, small fangs, fuzzy legs, and stubby arms raised at its sides. Most of the body outline is pierced through, leaving the solid oval pupils and the narrow bridges between the arms and torso intact. Carve the large horn arcs first while the pumpkin wall has maximum strength, then work inward to the eyes and finally the jagged fur fringe around the legs. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Advanced. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Transfer the stencil and begin with the two large swept horn shapes at the top of the pumpkin.
- Cut the oval eye openings next, leaving the solid oval pupil islands intact inside each.
- Carve the wide grinning-mouth area, preserving the small fang tips as separate solid points.
- Work down to the body outline, cutting the arms and hand shapes as isolated pieces.
- Carve the jagged fur fringe around the waist and legs last, using short careful strokes for each spike.
- Light with a bright LED puck so the wide cutouts and tiny fang details both read clearly.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedThe Stitched Stare Pumpkin Stencil
Two enormous wide eyes with hanging pupils stare beneath crackling zigzag brows, while small skull nostrils sit above a long stitched grin that stretches nearly ear to ear. The eyes are cut through around the drooping pupil tabs, the nostrils are pierced, and the mouth is one thin line crossed by vertical stitch slits. Those dangling pupils and skinny stitches make this a hard carve; keep every stitch cut short and support the pupil tabs while you saw around them.
AdvancedFang Snarl Pumpkin Stencil
Deeply wrinkled brows curl over narrowed eyes with rooted pupil tabs, a flared nose snarls in the middle, and a wide fanged grin full of jagged teeth completes this genuinely sinister face, flanked by small diamond cutouts at each temple. Everything is pierced through, and the layered brow wrinkles are why it rates hard. Cut the thin wrinkle slits with a fine-detail saw before the larger eye and mouth openings weaken the surrounding wall.
AdvancedThe Gritted Growler Pumpkin Stencil
Furrowed slash brows press down on angry eyes with squared pupil tabs, over a flat nose, cheek slits, and a wide clenched mouth divided into a grid of glowing tooth windows. Every window is pierced through, and the lattice of rind strips between them is the hard part. Cut the small mouth openings one at a time, alternating sides, so the grid never carries stress from a half finished row.
AdvancedThe Cyclops Mask Pumpkin Stencil
A huge single eye quartered by a bold plus-shaped bar dominates this monster mask, flanked by rows of diamond cutouts down each cheek, a tiny skull-like nose, and a jagged zigzag grin along the bottom. The eye quadrants, diamonds, nose, and zigzag are all cut through, with the plus bar and diamond lattice left as connected skin. This hard design demands order: carve the four eye sections first, then diamonds from the center outward, protecting that thin cross bar throughout.
AdvancedFuzzball Fright Pumpkin Stencil
A wide-eyed shaggy monster stares out with round googly eyes, a snub nose, and a jagged fanged smirk, all framed by tufts of wild fur around the edges. The face and fur spikes are cut through in many separate openings, which is where the hard rating comes from. Carve the small fur tufts and eye rings before the large mouth, and leave the skin bridges between shapes untouched so the face holds together.
AdvancedThe Wailing Howl Pumpkin Stencil
Two drooping, hooked eyes sag toward a small nose and an enormous lopsided open mouth, giving this face a wailing, ghostly howl. Every feature is pierced through, and the curled inner tips of the eyes are what sell the melting expression. This is a harder carve because the eye hooks and the long mouth curve leave narrow bridges of pumpkin, so cut those thin sections last and support the wall with your free hand.