Sleepy Lashed Pumpkin With Round Cheeks

From pumpkin to porch

1. 1

   Prep and scoop

   Cut a top lid at a slight angle and remove it cleanly. Scoop the interior to roughly one inch of wall thickness throughout, paying attention to the area where the eyelash slots will sit. Thinner walls in that zone can make narrow slots fragile.

2. 2

   Mark all openings before cutting

   Sketch or transfer the two crescent eyes, six lash slots, oval mouth, and four cheek holes. Confirm that each lash slot clears the eye curves by at least 8mm on all sides before picking up the saw.

3. 3

   Cut the eyelash slots first

   Each lash slot is a short, thin oval or teardrop. Work one at a time, cutting the full perimeter and pushing out the plug. Keep blades vertical and resist the urge to pry, which can tear the narrow rind bridge between lash and eye.

4. 4

   Carve the crescent eyes

   Cut each closed-eye curve as a narrow crescent, starting from one tip and sweeping to the other. The goal is a gentle downward arc that reads as a shut eyelid. A thin-bladed detail saw gives the cleanest line here.

5. 5

   Carve the mouth and cheek holes

   Cut the small oval mouth next, then drill or saw the four round cheek holes. A drill with a spade bit is fastest for the cheek circles. Cheek holes on the right and left of the mouth frame the expression and add warmth when lit.

6. 6

   Light and display

   Insert a flickering LED candle for a gentle, animated glow. The six tiny lash slots will light up as bright pinpricks above the dim crescent lids, creating the layered glow that makes this design look so alive. Display at eye height for full effect.

Written with AI to match this design